Axle questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JAKES 68GMC · 02-24-2006, 10:35 PM

Is my front axle (D44) a closed knuckle, or open? It has the balls on the end of the axle that the brake drums sit on, not the U-joints if that helps. Will drum brakes swap from a closed knuckle to an open knuckle axle or vise-versa?

Will my rear drum brakes bolt on to a Dana 60 form a F#rd truck, or are they different?
Jake

b454rat · 02-24-2006, 10:56 PM

Sounds like you have a closed knuckle front. Not sure on the drums. I'm thinking they wont, Ferd used bigger hubs, and GM wheels won't always go on.....

shelby987 · 02-25-2006, 04:57 PM

your rear is an eaton, I agree, I don't think the drums will go onto a ford d60

JAKES 68GMC · 02-25-2006, 06:24 PM

You sure about my rear end being an Eaton? It looks like a Dana to me, and the trucks all original.

b454rat · 02-25-2006, 07:59 PM

If it's a GMC then it would be the Dana 60, Chevy uses the Eaton. Either way I don't they will work.

JAKES 68GMC · 02-26-2006, 12:15 AM

Ok thanks.

69gmcfleet · 02-28-2006, 11:07 AM

I just purchased the exact truck you have as a parts truck for my '69.
Your truck should have the closed knuckle d44 front and full floater d60 rear as mine does. Good luck working on your truck.

Jeff

JAKES 68GMC · 02-28-2006, 04:25 PM

Huh, thats pretty neat! Never did see a truck that was exactly like mine.

69gmcfleet · 02-28-2006, 05:14 PM

My '69 was exactly the same as your '68 when I bought it 6 years ago, plow and all. It was all original with very little rust. Then the V-6 died at 100,000 miles. I have since put in the 350 and changed the gears. I do not drive mine in the winter anymore. I consider these GMC's to be rare. I have never seen another one in my area and get many offers to buy mine. I was shocked when I found the '68 at a local repair shop in the back lot. I got it for $500. It will be my parts truck for my '69 since the running gear is all the same. I love the old GMC 4x4's. It is good to see another one kickin' around.

JAKES 68GMC · 02-28-2006, 05:25 PM

Have more pics of it. Got a sweet deal on it, too. http://67-72chevytrucks.com/vboard/s...d.php?t=177955 more pics

02-24-2006, 10:35 PM	#1
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Axle questions Is my front axle (D44) a closed knuckle, or open? It has the balls on the end of the axle that the brake drums sit on, not the U-joints if that helps. Will drum brakes swap from a closed knuckle to an open knuckle axle or vise-versa? Will my rear drum brakes bolt on to a Dana 60 form a F#rd truck, or are they different? Jake

02-24-2006, 10:56 PM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: Axle questions Sounds like you have a closed knuckle front. Not sure on the drums. I'm thinking they wont, Ferd used bigger hubs, and GM wheels won't always go on..... __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

02-25-2006, 04:57 PM	#3
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Axle questions your rear is an eaton, I agree, I don't think the drums will go onto a ford d60 __________________ 1969 SS 350 Camaro Sold 2008 1970 3/4T K20, stock height with 33's, 250 I6, 3 on the tree, and locked front and rear 4.10's 1980 Chevy Malibu 2 dr Sold 2007 1993 Olds. Cutlass Ciera Wagon Traded 2006 2003 Saturn L200 w/5pd. D/D My list spans 5 decades with One common thread.....GM!

02-25-2006, 06:24 PM	#4
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: Axle questions You sure about my rear end being an Eaton? It looks like a Dana to me, and the trucks all original.

02-25-2006, 07:59 PM	#5
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,469	Re: Axle questions If it's a GMC then it would be the Dana 60, Chevy uses the Eaton. Either way I don't they will work. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 4” SAS 1999 GMC Yukon 350/4L60 6" SAS

02-26-2006, 12:15 AM	#6
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: Axle questions Ok thanks.

02-28-2006, 11:07 AM	#7
69gmcfleet Registered User Join Date: Apr 2000 Location: Oneonta, NY, US Posts: 103	Re: Axle questions I just purchased the exact truck you have as a parts truck for my '69. Your truck should have the closed knuckle d44 front and full floater d60 rear as mine does. Good luck working on your truck. Jeff Attached Images __________________ Jeff '69 GMC K2500 LWB, '74 350/SM465/Rockwell T-221, cnD44/ffD60, 3.73 gears, 31" BFG's (originally had 305ci V-6) '05 VW golf '84 HD Sportster XLX '68 GMC K2500 parts beast

02-28-2006, 04:25 PM	#8
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: Axle questions Huh, thats pretty neat! Never did see a truck that was exactly like mine.

02-28-2006, 05:14 PM	#9
69gmcfleet Registered User Join Date: Apr 2000 Location: Oneonta, NY, US Posts: 103	Re: Axle questions My '69 was exactly the same as your '68 when I bought it 6 years ago, plow and all. It was all original with very little rust. Then the V-6 died at 100,000 miles. I have since put in the 350 and changed the gears. I do not drive mine in the winter anymore. I consider these GMC's to be rare. I have never seen another one in my area and get many offers to buy mine. I was shocked when I found the '68 at a local repair shop in the back lot. I got it for $500. It will be my parts truck for my '69 since the running gear is all the same. I love the old GMC 4x4's. It is good to see another one kickin' around. __________________ Jeff '69 GMC K2500 LWB, '74 350/SM465/Rockwell T-221, cnD44/ffD60, 3.73 gears, 31" BFG's (originally had 305ci V-6) '05 VW golf '84 HD Sportster XLX '68 GMC K2500 parts beast

02-28-2006, 05:25 PM	#10
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: Axle questions Have more pics of it. Got a sweet deal on it, too. http://67-72chevytrucks.com/vboard/s...d.php?t=177955 more pics

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.