SEE TEN at Hilltop Farms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

see ten · 03-26-2006, 08:17 AM

I had to run up to my dad's yesterday to borrow a drill and happened to have the camera with me. He has some acreage with a small stable where they board a couple of horses. I think it's got a pretty good view and thought I would share a couple pictures. It was really overcast yesterday so the truck showed up very red in the pictures instead of its true Medium Red.

67chevy2wd · 03-26-2006, 01:08 PM

Looks good can't wait to get mine together so I can take some pics.

smiley68 · 03-26-2006, 09:04 PM

I really like the pics. You did a good job with backgrounds. I expecially like the last one on this page.

Premium72 · 04-06-2006, 02:35 AM

sweet pics im in Ga also. you goin to the swap me an show at conyers this weekend? let me know we'll meet up. w.

see ten · 04-06-2006, 04:21 PM

Quote:

Originally Posted by Premium72

sweet pics im in Ga also. you goin to the swap me an show at conyers this weekend? let me know we'll meet up. w.

Thanks for the compliment man. I wont be at Conyers this weekend but we are going to try to hit the downtown cruise in over in Dalton. It's a good one, it brings out over 300 rides on a regular basis.

glock35ipsc · 04-06-2006, 04:53 PM

Very nice pics, truck too! What drop combo do you have on that one? I really like the stance. Also, what is the tire size front and rear?

see ten · 04-06-2006, 10:07 PM

Quote:

Originally Posted by glock35ipsc

Very nice pics, truck too! What drop combo do you have on that one? I really like the stance. Also, what is the tire size front and rear?

Thanks man! I dropped it with a 2.5" spindle and a 1" coil in the front. The rear has a 6" dropped spring. I also converted to a one piece driveshaft and installed the Early Classic extreme drop crossmember. In these photos I was still running 15x8 wheels with a 275/60 on all four corners.

glock35ipsc · 04-06-2006, 11:35 PM

Quote:

Originally Posted by see ten

Thanks man! I dropped it with a 2.5" spindle and a 1" coil in the front. The rear has a 6" dropped spring. I also converted to a one piece driveshaft and installed the Early Classic extreme drop crossmember. In these photos I was still running 15x8 wheels with a 275/60 on all four corners.

Excellent! That just means I need to drop the front of mine another 1" and the rear another 1.5" and it will set prefect!

Oh, did you notch the frame for the 6" drop, or not?

Again, very nice ride! I can't wait to get mine back together again.

see ten · 04-07-2006, 06:23 AM

Quote:

Originally Posted by glock35ipsc

Excellent! That just means I need to drop the front of mine another 1" and the rear another 1.5" and it will set prefect!

Oh, did you notch the frame for the 6" drop, or not?

Again, very nice ride! I can't wait to get mine back together again.

Early Classic claims that a 6" spring will leave 3" between the frame and axle and it wont bottom out. I ended up having about 2.5" between the frame and axle (could be the weight of the spray-in bedliner) and it will bottom out occasionaly. A notch is probably in my future. I don't like to have to creep around trying to keep it from bottoming out.

Premium72 · 04-06-2006, 10:44 PM

drop me an email.... urbanlayers01@aol.com id be interested in meeting up for the cruise in....let me know..peace.

glock35ipsc · 04-07-2006, 09:12 AM

Cool, thanks for the info!

03-26-2006, 08:17 AM	#1
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	SEE TEN at Hilltop Farms I had to run up to my dad's yesterday to borrow a drill and happened to have the camera with me. He has some acreage with a small stable where they board a couple of horses. I think it's got a pretty good view and thought I would share a couple pictures. It was really overcast yesterday so the truck showed up very red in the pictures instead of its true Medium Red.

03-26-2006, 01:08 PM	#2
67chevy2wd Registered User Join Date: Sep 2003 Location: New Salem, ND Posts: 1,558	Re: SEE TEN at Hilltop Farms Looks good can't wait to get mine together so I can take some pics. __________________ 07 Chevy classic LBZ Duramax (a few mods) '67 Chevy 1/2 ton 2wd (in pieces) '69 Chevy 1/2 ton 2wd (on hold) '71 GMC 3/4 ton 4x4 ‘71 GMC 1/2 ton 2wd suburban

03-26-2006, 09:04 PM	#3
smiley68 Registered User Join Date: Aug 2005 Location: Omaha, NE Posts: 32	Re: SEE TEN at Hilltop Farms I really like the pics. You did a good job with backgrounds. I expecially like the last one on this page. __________________ Does anyone know your here! GOOD!

04-06-2006, 02:35 AM	#4
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: SEE TEN at Hilltop Farms sweet pics im in Ga also. you goin to the swap me an show at conyers this weekend? let me know we'll meet up. w.

04-06-2006, 04:53 PM	#6
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: SEE TEN at Hilltop Farms Very nice pics, truck too! What drop combo do you have on that one? I really like the stance. Also, what is the tire size front and rear? __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE Last edited by glock35ipsc; 04-06-2006 at 04:55 PM.

04-06-2006, 10:44 PM	#10
Premium72 Registered User Join Date: Sep 2005 Location: Villa Rica Ga Posts: 889	Re: SEE TEN at Hilltop Farms drop me an email.... urbanlayers01@aol.com id be interested in meeting up for the cruise in....let me know..peace.

04-07-2006, 09:12 AM	#11
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,684	Re: SEE TEN at Hilltop Farms Cool, thanks for the info! __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.