|
|
|
07-26-2002, 07:24 PM
|
#1 |
|
Registered User
Join Date: May 2000
Location: Storm Lake, Ia
Posts: 1,449
|
Box floor supports
I put a wood floor box on a metal floor box frame and seem to be missing something in the middle for support.I checked my parts trucks but they are all coil and do have a support connected to the shocks(ie brace between frame between wheel tubs). This is a leaf spring 1/2 frame and I checked my parts trucks but none of them are wood floor and none have that support on the springs. There are no holes drilled in frame by the springs and I got it this way. What am I missing and what interchanges between leaf and coil and 1/2 and 3/4. The floor just doesn't seem supported in the middle right
__________________
|
|
|
|
07-26-2002, 08:15 PM
|
#2 |
|
Senior Member
Join Date: Apr 2001
Location: Amazonia, Mo. USA
Posts: 2,821
|
Looking at my LMC catalog shows the rear cross sill, next are two equal length sills, a couple of center bed reinforcement strips and then three more sills like the equal two. You are missing some parts.
Bet you didn't want to hear that , huh.
__________________
72 3/4 4x4 350 4spd 72 3/4 4x4 350 auto 2004 Duramax Silverado 4x4 2006 Duramax Crew cab 4x4 2010 Harley Ultra Limited 2011 Harley Street Glide Last edited by nu2-72; 07-26-2002 at 08:18 PM. |
|
|
|
|
07-26-2002, 09:54 PM
|
#3 |
|
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
The supports in the middle dont bolt to the frame,& arent as tall as the rest.........the longhorn had 3 in the middle,1 short & 2 long ones(ends, & center of the tubs).........Al
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
