E brake.... can i just remove it? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tripleblack · 04-05-2006, 08:22 PM

I was wondering if i can just remove my ebrake because it never worked in the first place. Thanks.

tripleblack · 04-05-2006, 08:24 PM

by the way, there are not many hills in my city anyways, so i dont necesarily have to worry about my truck rolling away( at least not that far).

76bonanza · 04-05-2006, 08:33 PM

The E stands for emergency just so you know.(LOL)

CochinoFilipino · 04-05-2006, 08:39 PM

New cars don't even have E-brakes. They have parking brakes.

TruckinDaddy · 04-05-2006, 08:50 PM

Here in Texas, a properly functioning emergency brake is one of the items they are supposed to check during the annual inspection.

cdowns · 04-05-2006, 10:08 PM

they sure are nice to have when you need them//FIX IT!!!!!

CG · 04-05-2006, 10:28 PM

i was about 40 miles from home one day and my master cyl went out. i had to drive home through heavy seattle traffic just using my ebrake and ebrake release handle...i was glad i had it.

*wolfthing2000* · 04-05-2006, 10:36 PM

Don't tell the state cops this, but one time I was so excited about getting an old Willys wagon that I had just purchased home before the guy renigged on the deal, that I drove it about 50 miles without any pedal, found no fluid in the master when I got home , and slowed/ kinda stopped with the e-brake. I had a pair of wires leading to the brake switch in my lap to bridge when I thought I needed to indicate to the poor sucker behind me that I was attem[ting to stop , to run the brake lights.

Crazy!!!!!!!!!!!!!!

Jerry Jones · 04-05-2006, 10:47 PM

Quote:

Originally Posted by wolfthing2000

Don't tell the state cops this, but one time I was so excited about getting an old Willys wagon that I had just purchased home before the guy renigged on the deal, that I drove it about 50 miles without any pedal, found no fluid in the master when I got home , and slowed/ kinda stopped with the e-brake. I had a pair of wires leading to the brake switch in my lap to bridge when I thought I needed to indicate to the poor sucker behind me that I was attem[ting to stop , to run the brake lights.

Crazy!!!!!!!!!!!!!!

That is a classic!!!

MDC · 04-06-2006, 02:05 AM

Not to mention your saftey as well as others, your truck will not pass inspection without it in TX. I replaced all four cables and all of the hardware for about $125. I used a NOS front cable ($60), but Raybestos makes everything you need.

northcountry67 · 04-06-2006, 02:37 AM

I removed the e brake on my 67 because the ugly hand brake handle looked stupid. I'm going with an automatic, so I won't need it for parking and here in MN, if your vehicle is 39 years old, it doesn't have to meet the current "safety standards". Check your local laws.

lilred67 · 04-06-2006, 08:52 AM

as said above,your truck has to have a e-brake to pass texas state inspection.for those who don't like the handles on the '67-68 e-brakes,you can swap in a '69-72 foot operated e-brake.

*wolfthing2000* · 04-06-2006, 08:56 AM

I am putting the hand brake back in my 69/67 instead of the foot brake.

Solver · 04-06-2006, 08:59 AM

Would love to see a write up on swapping 69 or newer foot e brake on a 67-68.
I was going to do this on my 68 step as I also do not like the ugly hand brake. Problem I had was that the electric junction box sets sideways on 67-68 and there is no clearance for mounting the footpedal one in the firewall without major cutting and mods that I could see. Would love to hear details from someone who has done it!

glock35ipsc · 04-06-2006, 09:38 AM

Quote:

Originally Posted by Solver

Would love to see a write up on swapping 69 or newer foot e brake on a 67-68.
I was going to do this on my 68 step as I also do not like the ugly hand brake. Problem I had was that the electric junction box sets sideways on 67-68 and there is no clearance for mounting the footpedal one in the firewall without major cutting and mods that I could see. Would love to hear details from someone who has done it!

I think Wes at Classic Heartbeat did this once. I remember seeing a write-up about it somewhere, maybe on his website?

glock35ipsc · 04-06-2006, 09:40 AM

Yeah, here it is, pages 5 & 6:

http://www.classicheartbeat.com/panel_5.htm

67chevemall · 04-06-2006, 11:04 AM

fix it....

shifty · 04-06-2006, 04:22 PM

I love the 67-68 e-brake handle! the pedal looking ebrake and the handle ebrake are we-todd-did!

67chevemall · 04-06-2006, 06:39 PM

I'll buy it off you if it is the hand brake?

04-05-2006, 08:22 PM	#1
tripleblack short sell Ford stock Join Date: Aug 2005 Location: Houston, Texas Posts: 104	E brake.... can i just remove it? I was wondering if i can just remove my ebrake because it never worked in the first place. Thanks.

04-05-2006, 08:24 PM	#2
tripleblack short sell Ford stock Join Date: Aug 2005 Location: Houston, Texas Posts: 104	Re: E brake.... can i just remove it? by the way, there are not many hills in my city anyways, so i dont necesarily have to worry about my truck rolling away( at least not that far).

04-05-2006, 08:33 PM	#3
76bonanza Senior Member Join Date: Mar 2003 Location: St robert Mo Posts: 2,001	Re: E brake.... can i just remove it? The E stands for emergency just so you know.(LOL) __________________ 1968 c10 lowered 3" 4" 355/Th400 built by Hatfield racing in joplin MO

04-05-2006, 08:39 PM	#4
CochinoFilipino Registered User Join Date: Feb 2006 Location: Republic of California Posts: 345	Re: E brake.... can i just remove it? New cars don't even have E-brakes. They have parking brakes. __________________ '67 C10 Short Stepside 5.0TPI/700R4

04-05-2006, 08:50 PM	#5
TruckinDaddy What's that funky smell? Join Date: Mar 2005 Location: Austin, TX Posts: 610	Re: E brake.... can i just remove it? Here in Texas, a properly functioning emergency brake is one of the items they are supposed to check during the annual inspection. __________________ Mike S 68 C10 Long Step (Pretending to be a Long Fleetside) Grandpa's Farm Truck 3 on the tree, 307, No power brakes or steering Factory Options - HD rear spring and Ammeter/Oil Gauges My truck blog My Car Domain page

04-05-2006, 10:08 PM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: E brake.... can i just remove it? they sure are nice to have when you need them//FIX IT!!!!! __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-05-2006, 10:28 PM	#7
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,992	Re: E brake.... can i just remove it? i was about 40 miles from home one day and my master cyl went out. i had to drive home through heavy seattle traffic just using my ebrake and ebrake release handle...i was glad i had it.

04-05-2006, 10:36 PM	#8
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: E brake.... can i just remove it? Don't tell the state cops this, but one time I was so excited about getting an old Willys wagon that I had just purchased home before the guy renigged on the deal, that I drove it about 50 miles without any pedal, found no fluid in the master when I got home , and slowed/ kinda stopped with the e-brake. I had a pair of wires leading to the brake switch in my lap to bridge when I thought I needed to indicate to the poor sucker behind me that I was attem[ting to stop , to run the brake lights. Crazy!!!!!!!!!!!!!!

04-06-2006, 02:05 AM	#10
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: E brake.... can i just remove it? Not to mention your saftey as well as others, your truck will not pass inspection without it in TX. I replaced all four cables and all of the hardware for about $125. I used a NOS front cable ($60), but Raybestos makes everything you need. __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

04-06-2006, 02:37 AM	#11
northcountry67 Registered User Join Date: Dec 2005 Location: Lengby, Minnesota Posts: 225	Re: E brake.... can i just remove it? I removed the e brake on my 67 because the ugly hand brake handle looked stupid. I'm going with an automatic, so I won't need it for parking and here in MN, if your vehicle is 39 years old, it doesn't have to meet the current "safety standards". Check your local laws.

04-06-2006, 08:52 AM	#12
lilred67 Senior Member Join Date: Mar 2005 Location: weatherford,texas Posts: 1,003	Re: E brake.... can i just remove it? as said above,your truck has to have a e-brake to pass texas state inspection.for those who don't like the handles on the '67-68 e-brakes,you can swap in a '69-72 foot operated e-brake.

04-06-2006, 08:56 AM	#13
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: E brake.... can i just remove it? I am putting the hand brake back in my 69/67 instead of the foot brake.

04-06-2006, 08:59 AM	#14
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: E brake.... can i just remove it? Would love to see a write up on swapping 69 or newer foot e brake on a 67-68. I was going to do this on my 68 step as I also do not like the ugly hand brake. Problem I had was that the electric junction box sets sideways on 67-68 and there is no clearance for mounting the footpedal one in the firewall without major cutting and mods that I could see. Would love to hear details from someone who has done it! __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

04-06-2006, 09:40 AM	#16
glock35ipsc Next project: 1970 K10 Join Date: Feb 2004 Location: Fort Collins, Colo 80524 Posts: 6,685	Re: E brake.... can i just remove it? Yeah, here it is, pages 5 & 6: http://www.classicheartbeat.com/panel_5.htm __________________ *Bob* 1970 Chevy K10 LWB "Goldie" 350/TH350 *next project!!* 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE

04-06-2006, 11:04 AM	#17
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: E brake.... can i just remove it? fix it.... __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD



Register or Log In To remove these advertisements.

04-06-2006, 04:22 PM	#18
shifty Questionable Join Date: Mar 2005 Location: Atlanta Posts: 13,376	Re: E brake.... can i just remove it? I love the 67-68 e-brake handle! the pedal looking ebrake and the handle ebrake are we-todd-did! __________________ If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM.

04-06-2006, 06:39 PM	#19
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: E brake.... can i just remove it? I'll buy it off you if it is the hand brake?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.