Motor and tranny are in. Lots of pics! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

71Dragtruck · 04-20-2006, 01:23 AM

Well motor is in, just have to finish wiring my CDI box into my nitrous. Here are a tonne of pics. My crew chief and daughter Ashley is seen putting on the finishing touches ( tomboy for sure ). Also a pic of my tow rig ( I know it's a Ford, but at least a Harley ). Also notice I removed my front cross member and installed a tubular one ( lots more room to work in there now ). Plus a few of the after mass, as you can see I also was running on NOS ( empty cans, and a can of Beaver Buzz, made in Canada LOL ).

71Dragtruck · 04-20-2006, 01:25 AM

More.

71Dragtruck · 04-20-2006, 01:28 AM

again

71Dragtruck · 04-20-2006, 01:29 AM

Last one.

71Dragtruck · 04-20-2006, 01:39 AM

Also what are you guys using to resize pics, Photo ed makes even 5.5 meg pics look like crap.

muddpile · 04-20-2006, 02:02 AM

WOW!!! Are you going to be out at SIR this year? I would love to see that thing tear down the track!

**Yukon Jack** · 04-20-2006, 10:30 AM

Truck's looking awesome.

I use Corel PhotoPaint to resize my pics - it does a great job, but I'm sure there are some cheaper/free programs that do a good job too.

Gennoy · 04-20-2006, 10:45 AM

I use the Windows Image Resizer PowerToy. It is free and it can resize a large number of images all in one shot. All you have to do is right click on an image file and choose resize. It is worth the download to try it out. Just download the Image Resizer program from this page:

http://www.microsoft.com/windowsxp/d...powertoys.mspx

redhead69 · 04-20-2006, 10:45 AM

BOING!! Uhh.. I LIKEY

redhead69 · 04-20-2006, 10:48 AM

Sure looks different with the hood on

mplex2000 · 04-20-2006, 10:50 AM

Heheh....mr big bucks big block! Very nice dude.

fast_dev · 04-20-2006, 11:17 PM

looks great but.... if you plan on running NHRA they are gonna shut you down for the fuel regulator on the firewall. i know i agree its perfectly safe their on our trucks but the rulebook says not on the firewall. they made me move mine, i just made a quickie mount from a piece of flat 2 inch band iron and bent a 90 on the end to mount it to. otherwise they said its my last time through tech like that. have fun and post some time slips. Dev.

71Dragtruck · 04-21-2006, 12:11 AM

Did you just move it away from the firewall a bit then, on put it else where? Please let me know what's legal. That just feeds my nitrous, but ya I race at a NHRA track, and want to be legal. On a side note that reg is crap, creeps bad, even tryed a new one, never buying a Holley reg again, have a Aeromotive on the way.

I had it out today, and I'm more worried about no roll cage right now, holy crap does it pull hard, and thats with just motor. Can't get traction on the highway standing start is not a option, and it spools up quick, have to be fast on the gears or your bumping the rev limiter.

fast_dev · 04-21-2006, 12:43 PM

i'll try to get you a pic soon, i don't have it the way i want it yet but it got me through tech. i agree on the cage thing, i want to put one in my truck this year too. feels scary on the highway. how fast are you planning for it to be?? Dev.

71Dragtruck · 04-21-2006, 02:46 PM

Quote:

Originally Posted by fast_dev

i'll try to get you a pic soon, i don't have it the way i want it yet but it got me through tech. i agree on the cage thing, i want to put one in my truck this year too. feels scary on the highway. how fast are you planning for it to be?? Dev.

It will be in the 11's on motor alone. I ran 12's with my 396, and this thing is at least 175hp more and over 200 torque, that would be a conservative guess, never had the 396 dynoed.

72armyswbtruck · 04-21-2006, 01:41 PM

Super nice, but what about the F**D

71Dragtruck · 04-21-2006, 02:41 PM

Quote:

Originally Posted by 72armyswbtruck

Super nice, but what about the F**D

I know, I know, but like I said it's a Harley.

Zumo · 04-21-2006, 03:20 PM

Oops a pic of a F*rd got in there.

04-20-2006, 01:23 AM	#1
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Motor and tranny are in. Lots of pics! Well motor is in, just have to finish wiring my CDI box into my nitrous. Here are a tonne of pics. My crew chief and daughter Ashley is seen putting on the finishing touches ( tomboy for sure ). Also a pic of my tow rig ( I know it's a Ford, but at least a Harley ). Also notice I removed my front cross member and installed a tubular one ( lots more room to work in there now ). Plus a few of the after mass, as you can see I also was running on NOS ( empty cans, and a can of Beaver Buzz, made in Canada LOL ). Attached Images __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

04-20-2006, 01:25 AM	#2
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Motor and tranny are in. Lots of pics! More. Attached Images __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

04-20-2006, 01:28 AM	#3
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Motor and tranny are in. Lots of pics! again Attached Images __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 04-20-2006 at 01:30 AM.

04-20-2006, 01:29 AM	#4
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Motor and tranny are in. Lots of pics! Last one. Attached Images __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 04-20-2006 at 01:34 AM.

04-20-2006, 01:39 AM	#5
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Motor and tranny are in. Lots of pics! Also what are you guys using to resize pics, Photo ed makes even 5.5 meg pics look like crap. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

04-20-2006, 02:02 AM	#6
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Motor and tranny are in. Lots of pics! WOW!!! Are you going to be out at SIR this year? I would love to see that thing tear down the track! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

04-20-2006, 10:30 AM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Motor and tranny are in. Lots of pics! Truck's looking awesome. I use Corel PhotoPaint to resize my pics - it does a great job, but I'm sure there are some cheaper/free programs that do a good job too. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

04-20-2006, 10:45 AM	#8
Gennoy Registered User Join Date: Nov 2005 Location: Antelope, CA Posts: 21	Re: Motor and tranny are in. Lots of pics! I use the Windows Image Resizer PowerToy. It is free and it can resize a large number of images all in one shot. All you have to do is right click on an image file and choose resize. It is worth the download to try it out. Just download the Image Resizer program from this page: http://www.microsoft.com/windowsxp/d...powertoys.mspx __________________ 1969 Chevrolet C-10 SWB

04-20-2006, 10:45 AM	#9
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Motor and tranny are in. Lots of pics! BOING!! Uhh.. I LIKEY __________________ Currently truckless

04-20-2006, 10:48 AM	#10
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: Motor and tranny are in. Lots of pics! Sure looks different with the hood on __________________ Currently truckless

04-20-2006, 10:50 AM	#11
mplex2000 Registered User Join Date: Jul 2005 Location: DFW Posts: 463	Re: Motor and tranny are in. Lots of pics! Heheh....mr big bucks big block! Very nice dude.

04-20-2006, 11:17 PM	#12
fast_dev Registered User Join Date: Dec 2000 Location: Ringtown,PA Posts: 555	Re: Motor and tranny are in. Lots of pics! looks great but.... if you plan on running NHRA they are gonna shut you down for the fuel regulator on the firewall. i know i agree its perfectly safe their on our trucks but the rulebook says not on the firewall. they made me move mine, i just made a quickie mount from a piece of flat 2 inch band iron and bent a 90 on the end to mount it to. otherwise they said its my last time through tech like that. have fun and post some time slips. Dev. __________________ 68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater

04-21-2006, 12:11 AM	#13
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Motor and tranny are in. Lots of pics! Did you just move it away from the firewall a bit then, on put it else where? Please let me know what's legal. That just feeds my nitrous, but ya I race at a NHRA track, and want to be legal. On a side note that reg is crap, creeps bad, even tryed a new one, never buying a Holley reg again, have a Aeromotive on the way. I had it out today, and I'm more worried about no roll cage right now, holy crap does it pull hard, and thats with just motor. Can't get traction on the highway standing start is not a option, and it spools up quick, have to be fast on the gears or your bumping the rev limiter. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs Last edited by 71Dragtruck; 04-21-2006 at 03:38 AM.

04-21-2006, 12:43 PM	#14
fast_dev Registered User Join Date: Dec 2000 Location: Ringtown,PA Posts: 555	Re: Motor and tranny are in. Lots of pics! i'll try to get you a pic soon, i don't have it the way i want it yet but it got me through tech. i agree on the cage thing, i want to put one in my truck this year too. feels scary on the highway. how fast are you planning for it to be?? Dev. __________________ 68 chevy 406 small block, budget drag racer, new best e.t 11.91 @112 67 nova numbers matching 327 4 speed 13.6 @ 102mph 70 longhorn c-30 402/4 speed 70 c-10 swb 402, muncie 4 speed 94 s-10 350/th350 3:73 posi 71 c-20 402/th400 towrig for racetruck. 72 4wd lifted on 35's 72 350/3 speed winter beater

04-21-2006, 01:41 PM	#16
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: Motor and tranny are in. Lots of pics! Super nice, but what about the F**D __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"



Register or Log In To remove these advertisements.

04-21-2006, 03:20 PM	#18
Zumo Hot Rods For Life Join Date: Sep 2001 Location: Waxahachie, TX Posts: 3,305	Re: Motor and tranny are in. Lots of pics! Oops a pic of a Frd got in there. __________________ 1968 C10 LWB *SOLD* Andy Viva Los Bicicletas! Los Muertos Custom Bicycles

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.