Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-28-2002, 04:19 PM | #1 |
Registered User
Join Date: Mar 2002
Location: Flower Mound, TX, USA
Posts: 44
|
Wiring - replacing 67 instr panel with later
Picked up a instr. panel to replace the old one in 67.
Came out of 72. Anyone ever rewired the plug so it will work in 67? If so do you have a diagram? |
07-28-2002, 04:22 PM | #2 |
huh?
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,690
|
Do you mean a you're wiring a gauge dash into a truck that didn't have gauges? If so, here you go, this is straight off of GMC Pauls website:
Swapping A Idiot Light Dash Out To Gauge Dash The following is for a gauge dash this gives the numbered position of the wires in gauge dash and followed by what it supplies, then number from idiot light dash you move wire from. 1-Black with white stripe (alternator) This runs from the 12 R from voltage regulator and should have a inline fuse. 2-Tan (Brake warning light) Original position 2 3-Pink (Fuel Gauge) Original Position 7 4-Tan(Fuel Gauge) Original Position 4 5-Empty(not Used) 6-Dark Green (Temp. Gauge) Original position 5 7-Black(ground)Original Position 6 8-Gray(cluster light feed) Original Position 12 9-Medium Blue (Right turn) Original Position 11 10-Lt. Blue (left turn) Original Position 10 11-Lt. Green (high Beam indicator) Original Position 9 12-Black/w brown stripe use wire ran from the junction block near battery mounted to passenger side fender with a inline fuse located at junction block end. Remove the wires from your loom plug and place the colors in the # on plug that corresponds with the color from list above. You will need to replace your idiot light temp. gauge for a temp. sending unit with gauges. The black and white wire feeds from the 12gRed wire off back of alternator and requires the use of 2-4amp inline fuses, this wire you need to make and run. The DARK BLUE wire that was originally in #1 position should be deleted because this was the idiot light for the oil pressure. If you need more info. ask.
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
07-28-2002, 04:23 PM | #3 |
huh?
Join Date: May 2000
Location: Washington, Illinois
Posts: 5,690
|
Here's the gauge connector wiring pic:
__________________
Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|