Pics from local Cruise - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1971Stepside** · 07-29-2002, 02:49 PM

There are several....this truck was all original 402 BB AC, Tilt, Tach, Buckets! Sweet truck. If you look at the guy looking at the black step that is the owner of this truck. Nice guy!

**1971Stepside** · 07-29-2002, 02:52 PM

This truck had a sweet paint job....lots of time in this one.

**1971Stepside** · 07-29-2002, 02:52 PM

Pretty clean truck

**1971Stepside** · 07-29-2002, 02:53 PM

Another one

**1971Stepside** · 07-29-2002, 02:54 PM

Two more to go...

**1971Stepside** · 07-29-2002, 02:54 PM

Hmmmm....truck ornament.....

70c10 · 07-29-2002, 03:32 PM

I like the Burgandy one and the dark blue one. Also like the hood ornament

SWINGSAX68 · 07-29-2002, 03:41 PM

I like the dark blue one....looks like a 4x4 or its lifted....I also like that black step...both 68's...oh yeah....I like the one with the white top also

lost wages · 07-30-2002, 02:45 AM

that black step side has over 600,000 miles on it, he shows it all over, its sweet. pretty good turn out for our little show.

**68SWB4x4** · 07-30-2002, 02:51 AM

nice turn out for a little show, and even a rearend shot, good coverage!
btw that aint a 4x4

Mudder · 07-30-2002, 12:01 PM

But met up with a new female friend! I have never missed the cruise, for a whole summer, so I will get there before Fall. Maybe the ole man will get out when it gets a little cooler. Lots of nice trucks there this year.

Denny · 07-30-2002, 06:21 PM

Thanks for uploading those. There were some sweet trucks there. Not to mention the ornament LOL

07-29-2002, 02:49 PM	#1
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Pics from local Cruise There are several....this truck was all original 402 BB AC, Tilt, Tach, Buckets! Sweet truck. If you look at the guy looking at the black step that is the owner of this truck. Nice guy! Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far." Last edited by 1971Stepside; 07-29-2002 at 02:56 PM.

07-29-2002, 02:52 PM	#2
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Another This truck had a sweet paint job....lots of time in this one. Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-29-2002, 02:52 PM	#3
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Pretty clean truck Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-29-2002, 02:53 PM	#4
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Another one Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-29-2002, 02:54 PM	#5
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Two more to go... Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-29-2002, 02:54 PM	#6
1971Stepside Almost Satisfied Join Date: Mar 2002 Location: Springfield, MO Posts: 2,932	Hmmmm....truck ornament..... Attached Images __________________ 1971 C10 Stepside. LSx 6.0 with BTR Stage IV, Speed Engineering Headers, 4L80e transmission w/3200 Circle-D Stall. 3.73. Posi. Purchased this truck when I was 17. I started the rebuild (or take apart) in 1993. I have drug it around all over the country in pieces. Finally back on the road in 2021. "I can't complain, but sometimes I still do. Life's been good to me so far."

07-29-2002, 03:32 PM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I like the Burgandy one and the dark blue one. Also like the hood ornament __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

07-29-2002, 03:41 PM	#8
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	I like the dark blue one....looks like a 4x4 or its lifted....I also like that black step...both 68's...oh yeah....I like the one with the white top also __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

07-30-2002, 02:45 AM	#9
lost wages Registered User Join Date: Apr 2001 Location: jefferson city, mo Posts: 1,364	that black step side has over 600,000 miles on it, he shows it all over, its sweet. pretty good turn out for our little show.

07-30-2002, 02:51 AM	#10
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	nice turn out for a little show, and even a rearend shot, good coverage! btw that aint a 4x4 __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

07-30-2002, 12:01 PM	#11
Mudder Registered User Join Date: Feb 2001 Location: East Central, MO Posts: 11,336	I was nearly there! But met up with a new female friend! I have never missed the cruise, for a whole summer, so I will get there before Fall. Maybe the ole man will get out when it gets a little cooler. Lots of nice trucks there this year.

07-30-2002, 06:21 PM	#12
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Thanks for uploading those. There were some sweet trucks there. Not to mention the ornament LOL __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.