swb wide bed f/s in va. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 06-12-2006, 10:02 PM

with a little work this would make a nice driver shape bed looks like it has a little bondo in it from small dents here and there . it has a few new small dents/dings sence was last painted . bed floor has some waves in it very little rust other than surface rust and 3 small holesin the floor look at pics. under neith crossmembers and floor looks good. ft. gate is perty straight. tailgate is fair it does have some rust threw inner bottom and is included but i sold the tailgate henges i will include a set of a drifferent color. $600.00 if anyone is interested in it respond in tread frist and then pm me if you like. all and all this bed looks worst than it realy is.from 1 to 10 for a good driver bed i give this one a 6 1/2 to 7 .[SOLD] to tim

billsbowtie · 06-12-2006, 10:03 PM

we got a rain last nite as you can see it holds water.

billsbowtie · 06-12-2006, 10:04 PM

billsbowtie · 06-12-2006, 10:05 PM

billsbowtie · 06-12-2006, 10:05 PM

billsbowtie · 06-12-2006, 10:05 PM

billsbowtie · 06-12-2006, 10:06 PM

billsbowtie · 06-12-2006, 10:06 PM

billsbowtie · 06-12-2006, 10:06 PM

chevdanbarnett · 06-12-2006, 10:51 PM

hay bill whats up i was wondering if you had any gaugae setups before i buy from any body else our any black carpet

billsbowtie · 06-12-2006, 10:58 PM

trans do you want a 3 speed standard i have 1 out of a 72. i have 2 350 auto.s
i mite have a shroud.
i have a gauge dash bezel but i think its sold.

chevdanbarnett · 06-12-2006, 11:05 PM

sorry bill i am stuped i need autos it for nathen truck 4x4 1971 but might want the 3 speed for jordens truck send me a pm on how much and if you have pic thanks dan

billsbowtie · 06-12-2006, 11:21 PM

sending pm

billsbowtie · 06-13-2006, 12:39 PM

ttt

byrd · 06-13-2006, 09:30 PM

How much bondo is in the bedsides, looks as if the pass side has a pretty thick chunck out of it? Would the bedsides be able to be straightend out?

billsbowtie · 06-13-2006, 10:02 PM

it has a chunck in the pass. side where looks like a dent was . the bed would make a nice driver bed but not for a show truck. i have some more pics. i am going to post in a few mins. i think the bed sides would turn out perty good. bill

billsbowtie · 06-13-2006, 10:03 PM

billsbowtie · 06-13-2006, 10:03 PM

billsbowtie · 06-13-2006, 10:03 PM

seanu · 06-14-2006, 09:55 PM

Oh, I'd be interested..if you were closer, since I have a SWB without a bed right now...but I'm in Florida

billsbowtie · 06-14-2006, 10:02 PM

seanu road trip

billsbowtie · 06-16-2006, 11:30 PM

ttt

billsbowtie · 06-19-2006, 12:20 PM

ttt

billsbowtie · 06-19-2006, 06:25 PM

no rust or bondo in the wheel arches.

billsbowtie · 06-19-2006, 06:25 PM

06-12-2006, 10:02 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	swb wide bed f/s in va. with a little work this would make a nice driver shape bed looks like it has a little bondo in it from small dents here and there . it has a few new small dents/dings sence was last painted . bed floor has some waves in it very little rust other than surface rust and 3 small holesin the floor look at pics. under neith crossmembers and floor looks good. ft. gate is perty straight. tailgate is fair it does have some rust threw inner bottom and is included but i sold the tailgate henges i will include a set of a drifferent color. $600.00 if anyone is interested in it respond in tread frist and then pm me if you like. all and all this bed looks worst than it realy is.from 1 to 10 for a good driver bed i give this one a 6 1/2 to 7 .[SOLD] to tim Last edited by billsbowtie; 06-20-2006 at 07:30 PM.

06-12-2006, 10:03 PM	#2
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. we got a rain last nite as you can see it holds water.

06-12-2006, 10:04 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va.

06-12-2006, 10:05 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va.

06-12-2006, 10:05 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va.

06-12-2006, 10:06 PM	#7
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va.

06-12-2006, 10:51 PM	#10
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: swb wide bed f/s in va. hay bill whats up i was wondering if you had any gaugae setups before i buy from any body else our any black carpet

06-12-2006, 10:58 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. trans do you want a 3 speed standard i have 1 out of a 72. i have 2 350 auto.s i mite have a shroud. i have a gauge dash bezel but i think its sold.

06-12-2006, 11:05 PM	#12
chevdanbarnett Senior Member Join Date: Apr 2006 Location: ohio medina Posts: 451	Re: swb wide bed f/s in va. sorry bill i am stuped i need autos it for nathen truck 4x4 1971 but might want the 3 speed for jordens truck send me a pm on how much and if you have pic thanks dan

06-12-2006, 11:21 PM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. sending pm

06-13-2006, 12:39 PM	#14
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. ttt

06-13-2006, 10:02 PM	#16
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. it has a chunck in the pass. side where looks like a dent was . the bed would make a nice driver bed but not for a show truck. i have some more pics. i am going to post in a few mins. i think the bed sides would turn out perty good. bill

06-13-2006, 10:03 PM	#17
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va.

06-14-2006, 09:55 PM	#20
seanu Too many projects!!! Join Date: Jul 2000 Location: Jacksonville, Florida Posts: 508	Re: swb wide bed f/s in va. Oh, I'd be interested..if you were closer, since I have a SWB without a bed right now...but I'm in Florida __________________ Sean 1995 Buick Roadmaster Sedan 2004 Chevy Trailblazer 5.3L V8 1963 Chevy Biscayne 4D Sedan 1971 Chevy C10 (now have 70 cab & frame) 1968 Chevy C10 (parts for the 70) 1991 Oldsmobile Custom Cruiser (Chevy 355 motor) 1937 Pontiac 8 4D Touring Sedan (in pieces) Jacksonville, Florida

06-14-2006, 10:02 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. seanu road trip



Register or Log In To remove these advertisements.

06-16-2006, 11:30 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. ttt

06-19-2006, 12:20 PM	#23
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. ttt

06-19-2006, 06:25 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed f/s in va. no rust or bondo in the wheel arches.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.