Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
06-16-2006, 10:28 AM | #1 |
Senior Member
Join Date: Feb 2003
Location: Wichita KS
Posts: 610
|
Poly body mount bushing install???
I am having some trouble here... The upper bushing and washer is the culprit. How do they come apart? Is it just something that I need a vise and a large pry bar and giver her hell or what?
I'm about to just up and order the stuff new
__________________
~Steve~
Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean. |
06-16-2006, 03:32 PM | #2 |
Senior Member
Join Date: Feb 2003
Location: Wichita KS
Posts: 610
|
Re: Poly body mount bushing install???
Thinking on the matter some more today while I should have been working...
Would it REALLY kill anything if someone was to use the stock lower washer, but in place of the huge upper cup/washer just run a flat washer? I don't see how it would hurt when I'm just picturing it in my head, and it'd sure be alot cleaner/easier to deal with.... Need some feedback on this idea, I'll be washer hunting tommorrow if you guys think it'll work. Also, found a place that will media blast my WHOLE cab inside and out for 100$. Keep your eyes peeled in the next couple weeks for some pictures of a truck in almost 1 piece
__________________
~Steve~
Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean. |
06-16-2006, 11:38 PM | #3 |
Senior Member
Join Date: Feb 2003
Location: Wichita KS
Posts: 610
|
Re: Poly body mount bushing install???
**crickets chirping**
__________________
~Steve~
Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean. |
06-17-2006, 01:46 PM | #4 |
Registered User
Join Date: Jul 2004
Location: ashland oh
Posts: 660
|
Re: Poly body mount bushing install???
don't have an answer to your question,but some good advice,,don't throw any of the old parts away until new ones arrive like i did and had to go dumpster diving..ended up needing the 2 rear metal sleeves that go thru bushing,the ones i got were from summit and those pieces were not included..
also now that i'm thinking about it,,the washer's and sleeves are just embeded in the rubber,,,pry and cuss... |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|