For Sale- Spicer 3/4 Ton Locking Hubs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*72longbed* · 06-18-2006, 09:28 AM

I have a nice pair of Spicer original factory locking hubs for the 3/4 ton Dana 44 front axle. These are the hubs with the 'Big' Chrome outer cover and the BLUE Chevy center dials. The have been completely disassembled, cleaned, and have had all wear items replaced with 'like new' factory parts. These are in excellent shape internally, all gear surfaces are very good. Externally the dials turn easily, lock positively, and the plastic parts are not damaged inside.
They are the complete units, from the end of the axle shaft out to the dials.

These hubs worked very well on my truck through some deep snows here in PA last winter.

I'm asking 175.00 for the pair plus shipping.

Thanks,
72longbed

**402Bowtie** · 06-18-2006, 09:49 AM

i'm interested....got any pics?

*72longbed* · 06-18-2006, 10:01 AM

I'll be able to get some Pics on Monday.

Thanks,
72longbed

**special-K** · 06-18-2006, 10:54 AM

How are they cosmetically?

*72longbed* · 06-18-2006, 11:13 AM

As far as appearance goes, there are some minor scratches and dings, nothing that a small buffer couldn't clean up. After all they are 34 years old. I don't have a small buffing attachment for the bolt recesses so they could use a little cleaning. The chrome is still attached real well.

BTW, all interested parties, according to the New Buying and Selling Rules, please show your interest HERE in the Thread, rather than any other way. I just want to be fair to all interested parties when it comes time to figure out who gets first dibbs.

Thanks,
72longbed

*72longbed* · 06-18-2006, 07:24 PM

Here's those Pics:

*72longbed* · 06-19-2006, 09:32 AM

Bob,
From the UPS website, shipping to 97401, Eugene, OR, is going to be around $17.00.

Still available.

Thanks,
72longbed

**402Bowtie** · 06-20-2006, 08:56 AM

I think I will pass....thanks

06-18-2006, 09:28 AM	#1
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	For Sale- Spicer 3/4 Ton Locking Hubs I have a nice pair of Spicer original factory locking hubs for the 3/4 ton Dana 44 front axle. These are the hubs with the 'Big' Chrome outer cover and the BLUE Chevy center dials. The have been completely disassembled, cleaned, and have had all wear items replaced with 'like new' factory parts. These are in excellent shape internally, all gear surfaces are very good. Externally the dials turn easily, lock positively, and the plastic parts are not damaged inside. They are the complete units, from the end of the axle shaft out to the dials. These hubs worked very well on my truck through some deep snows here in PA last winter. I'm asking 175.00 for the pair plus shipping. Thanks, 72longbed Last edited by 72longbed; 06-18-2006 at 09:32 AM.

06-18-2006, 09:49 AM	#2
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: For Sale- Spicer 3/4 Ton Locking Hubs i'm interested....got any pics?

06-18-2006, 10:01 AM	#3
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: For Sale- Spicer 3/4 Ton Locking Hubs I'll be able to get some Pics on Monday. Thanks, 72longbed

06-18-2006, 10:54 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: For Sale- Spicer 3/4 Ton Locking Hubs How are they cosmetically? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-18-2006, 11:13 AM	#5
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: For Sale- Spicer 3/4 Ton Locking Hubs As far as appearance goes, there are some minor scratches and dings, nothing that a small buffer couldn't clean up. After all they are 34 years old. I don't have a small buffing attachment for the bolt recesses so they could use a little cleaning. The chrome is still attached real well. BTW, all interested parties, according to the New Buying and Selling Rules, please show your interest HERE in the Thread, rather than any other way. I just want to be fair to all interested parties when it comes time to figure out who gets first dibbs. Thanks, 72longbed Last edited by 72longbed; 06-18-2006 at 11:20 AM.

06-18-2006, 07:24 PM	#6
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: For Sale- Spicer 3/4 Ton Locking Hubs Here's those Pics: Attached Images Last edited by 72longbed; 06-18-2006 at 07:29 PM.

06-19-2006, 09:32 AM	#7
72longbed Account Suspended Join Date: Jun 2003 Location: PA Posts: 1,411	Re: For Sale- Spicer 3/4 Ton Locking Hubs Bob, From the UPS website, shipping to 97401, Eugene, OR, is going to be around $17.00. Still available. Thanks, 72longbed

06-20-2006, 08:56 AM	#8
402Bowtie Registered User Join Date: Sep 2003 Location: Wichita, KS Posts: 3,735	Re: For Sale- Spicer 3/4 Ton Locking Hubs I think I will pass....thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.