Wiw??? Rust Free 67 Small Window Cab - The 1947 - Present Chevrolet & GMC Truck Message Board Network

otef546 · 07-31-2006, 11:28 PM

wanting some opinions as to what you think this cab might be worth?All original metal 98% rust free, very little surface rust in a few spots but everything is solid.Both the doors are very solid and shut and align perfect.The only thing negative about the cab is some moron that put exhaust on the truck bent the inner edges of the cab corners up instead of running the pipes where they belong.I'm trying to decide whether to use this cab where all I have to do is prep and paint or to go with my big window cab that needs rockers, one cab corner, one cab support and some metal work around the fresh air vent area.thanks Mike

otef546 · 07-31-2006, 11:30 PM

more pics

**special-K** · 08-01-2006, 07:07 AM

I`d give $500 for a decent cab like that.Big wnidow/small window is a matter of preference more than value.I`d have to see the floor to be sure.Is that rust in the rocker?
If you`re considering including the doors,I`d go $850 for the package if the doors are real nice.
Although alot of truck cabs have rust,panels are available to fix it all.So,people have to weight tearing a truck all the way down,paying for the replacement cab & hauling/shipping,prep,swapping parts against replacing the panels in the original cab.
Then,there`s weighing to cost of just buying a truck that is already solid and skipping a boat-load of bodywork.
If you decide to sell and a price,let me know.I need a`67 cab for a scratch-built`67 GMC project.

71swb4x4 · 08-01-2006, 08:22 AM

Mike, if that was my cab I would either leave it on the 67 I was restoring or buy a 67 to restore just so I could use that cab.
It would be very tough to put an accurate price on it, you just don't see many cabs in that shape, and definitely not small windows.

otef546 · 08-01-2006, 03:01 PM

thanks guys. No that's not rust on the rockers they are solid just poor pics taken after dark and the paint is scuffed up from all the years of use.The floors are also solid with no rust.I'm about 98% sure I'll just use this cab I just wasn't 100% sure about the small window.thanks for your input. Mike

teeitup · 08-01-2006, 04:12 PM

I too would be interested in it if you decide a price, I'm needing one for my 67 4x4. Thanks Randy

ZOOMY · 08-02-2006, 08:43 PM

Small window rust-free cabs are almost impossible to find. Just in case you're wanting an A/C cab, I'd trade my California small window A/C cab for a non A/C one..............Zoomy

otef546 · 08-03-2006, 12:24 AM

Thanks for the input. I think all your comments made me decide to use the 67 cab for sure, I was already leaning in that direction.If for some reason I would change my mind I'll keep all you in mind.thanks Mike

07-31-2006, 11:28 PM	#1
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Wiw??? Rust Free 67 Small Window Cab wanting some opinions as to what you think this cab might be worth?All original metal 98% rust free, very little surface rust in a few spots but everything is solid.Both the doors are very solid and shut and align perfect.The only thing negative about the cab is some moron that put exhaust on the truck bent the inner edges of the cab corners up instead of running the pipes where they belong.I'm trying to decide whether to use this cab where all I have to do is prep and paint or to go with my big window cab that needs rockers, one cab corner, one cab support and some metal work around the fresh air vent area.thanks Mike Attached Images

07-31-2006, 11:30 PM	#2
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: Wiw??? Rust Free 67 Small Window Cab more pics Attached Images

08-01-2006, 07:07 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Wiw??? Rust Free 67 Small Window Cab I`d give $500 for a decent cab like that.Big wnidow/small window is a matter of preference more than value.I`d have to see the floor to be sure.Is that rust in the rocker? If you`re considering including the doors,I`d go $850 for the package if the doors are real nice. Although alot of truck cabs have rust,panels are available to fix it all.So,people have to weight tearing a truck all the way down,paying for the replacement cab & hauling/shipping,prep,swapping parts against replacing the panels in the original cab. Then,there`s weighing to cost of just buying a truck that is already solid and skipping a boat-load of bodywork. If you decide to sell and a price,let me know.I need a`67 cab for a scratch-built`67 GMC project. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-01-2006, 08:22 AM	#4
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Wiw??? Rust Free 67 Small Window Cab Mike, if that was my cab I would either leave it on the 67 I was restoring or buy a 67 to restore just so I could use that cab. It would be very tough to put an accurate price on it, you just don't see many cabs in that shape, and definitely not small windows. __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

08-01-2006, 03:01 PM	#5
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: Wiw??? Rust Free 67 Small Window Cab thanks guys. No that's not rust on the rockers they are solid just poor pics taken after dark and the paint is scuffed up from all the years of use.The floors are also solid with no rust.I'm about 98% sure I'll just use this cab I just wasn't 100% sure about the small window.thanks for your input. Mike

08-01-2006, 04:12 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Wiw??? Rust Free 67 Small Window Cab I too would be interested in it if you decide a price, I'm needing one for my 67 4x4. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-02-2006, 08:43 PM	#7
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	Re: Wiw??? Rust Free 67 Small Window Cab Small window rust-free cabs are almost impossible to find. Just in case you're wanting an A/C cab, I'd trade my California small window A/C cab for a non A/C one..............Zoomy

08-03-2006, 12:24 AM	#8
otef546 Junior Member Join Date: Sep 2005 Location: Beebe Arkansas Posts: 152	Re: Wiw??? Rust Free 67 Small Window Cab Thanks for the input. I think all your comments made me decide to use the 67 cab for sure, I was already leaning in that direction.If for some reason I would change my mind I'll keep all you in mind.thanks Mike

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.