![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
|
no more BFH on the trailing arms!
I don't get to contribute here very often but thought I'd share a simple way to get the trailing arms back in with new bushings - EASILY - I simply put in some all thread with nuts and washers (see picture) - turned the nuts outward and the holder opened up enough to start sliding the arm into place - when it got to the all thread and nuts, I took those out and it slid down in quite nicely. It also worked for the tracking bar.
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Oct 2005
Location: Orygun
Posts: 169
|
Re: no more BFH on the trailing arms!
Sweet, good idea.
I'll try it out soon. |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|