How to remove gas pedal - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**MikeB** · 10-14-2006, 04:16 PM

I feel really dumb, but I'm trying to remove my carpet and can't see how to unbolt the gas pedal from the floor. I installed the carpet 15 years ago, but just can't remember how to remove the pedal.

By the way, it's a pedal with the stainless trim, if that makes any difference.

70GMCer · 10-14-2006, 04:24 PM

Just pull it up. It just snaps into to mounting balls on the floor. It should just pry off.......

**MikeB** · 10-14-2006, 05:15 PM

Ah, it's all coming back to me. That did it! Thanks.

10-14-2006, 04:16 PM	#1
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,568	How to remove gas pedal I feel really dumb, but I'm trying to remove my carpet and can't see how to unbolt the gas pedal from the floor. I installed the carpet 15 years ago, but just can't remember how to remove the pedal. By the way, it's a pedal with the stainless trim, if that makes any difference. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

10-14-2006, 04:24 PM	#2
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: How to remove gas pedal Just pull it up. It just snaps into to mounting balls on the floor. It should just pry off....... __________________ 1997 GMC Sierra Ext 1965 Mustang

10-14-2006, 05:15 PM	#3
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,568	Re: How to remove gas pedal Ah, it's all coming back to me. That did it! Thanks. __________________ Mike 1969 C10 LWB -- owned for 35 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 24 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.