cab mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Batmat · 10-18-2006, 06:49 PM

I need a little help here. I just got my cab mount kit from Kenny's Trucks. (1971 2 wheel drive short bed). I have a bag with the following: 6 bolts all the same length, two are slightly thicker, 8 washers (two for the thicker bolts, the remainder for the smaller bolts), 6 metal spacers three sets of different sizes, 6 round poly mounts, 4 tapered poly mounts, and two tapered (different) mounts, and six nuts. Its been so long since I took the cab off, I cant remember how the mounts go on. Any help would be great, (pictures or drawings would be a benefit. Thanks

Aarons72s · 10-18-2006, 06:55 PM

Do you happen to have a lmc truck catalog. Flip to the page that shows the body mounts and it will show you how everything goes. By the way the thick bolts go in the front holes in the cab. Oh and if you dont have there catalog just go to there web site. They have there catalogs scanned on there server.
www.lmctruck.com
We always say that lmc parts arent usually that great but there catalogs make good manuals.
Aaron

Batmat · 10-18-2006, 09:08 PM

I looked at their catalog. they mail me one every month or so, so I keep them all over the shop as reference material. in the catalog, it is hard to tell which mount goes where and which metal sleeve I use at each location.

70c10 · 10-18-2006, 09:26 PM

This may help: http://67-72chevytrucks.com/vboard/s...ghlight=mounts

Batmat · 10-19-2006, 06:22 PM

Thanks 70c10, that is just what I was looking for.

10-18-2006, 06:49 PM	#1
Batmat Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 28	cab mounts I need a little help here. I just got my cab mount kit from Kenny's Trucks. (1971 2 wheel drive short bed). I have a bag with the following: 6 bolts all the same length, two are slightly thicker, 8 washers (two for the thicker bolts, the remainder for the smaller bolts), 6 metal spacers three sets of different sizes, 6 round poly mounts, 4 tapered poly mounts, and two tapered (different) mounts, and six nuts. Its been so long since I took the cab off, I cant remember how the mounts go on. Any help would be great, (pictures or drawings would be a benefit. Thanks

10-18-2006, 06:55 PM	#2
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: cab mounts Do you happen to have a lmc truck catalog. Flip to the page that shows the body mounts and it will show you how everything goes. By the way the thick bolts go in the front holes in the cab. Oh and if you dont have there catalog just go to there web site. They have there catalogs scanned on there server. www.lmctruck.com We always say that lmc parts arent usually that great but there catalogs make good manuals. Aaron

10-18-2006, 09:08 PM	#3
Batmat Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 28	Re: cab mounts I looked at their catalog. they mail me one every month or so, so I keep them all over the shop as reference material. in the catalog, it is hard to tell which mount goes where and which metal sleeve I use at each location.

10-18-2006, 09:26 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: cab mounts This may help: http://67-72chevytrucks.com/vboard/s...ghlight=mounts __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-19-2006, 06:22 PM	#5
Batmat Registered User Join Date: Mar 2005 Location: Las Vegas, NV Posts: 28	Re: cab mounts Thanks 70c10, that is just what I was looking for.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.