Bucket Seats in truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Desperado · 08-16-2002, 12:19 PM

What bucket seats will go in my 1980 - 1987 chevy truck. I hate the bench seat and i want a cool ratchet shifter on the floor. how much modifacation will it need to work(seats)

bradshop · 08-16-2002, 10:27 PM

Well..... I have a 85 chevy..C-30 and I recently installed bucket seats in it. I now also have added a star shifter from B&M. I got my seats from JC Whitney. They run betwen $600 & $700. They are really sweet. They come with a hide away cooler under the middle seat.

gchemist · 08-19-2002, 02:07 PM

How about Astro Van seats? Astro seats in a Blazer

arty52002 · 08-19-2002, 10:06 PM

I put some bucket seats out of an Eagle Talon in my truck. The base from the seats was just the right heigth. They looked really sharp, and I got mine from a salvage yard, they looked brand new, and I only gave fifty dollars for them.

69Custom · 08-31-2002, 05:10 PM

I had a 83 C10 SWB that I installed bucket in. I used the frame rails out of the suburban since the floor pan is the same. I also cut the front support out too (you will see what I mean if you take a look at a suburban in a junk yard). I then got seats out of a Ford Aerostar van. I can tell you that they were very confortable and they even had a arm rest. If you have any questions you can email me or pm me.

08-16-2002, 12:19 PM	#1
Desperado Registered User Join Date: Aug 2002 Posts: 6	Bucket Seats in truck What bucket seats will go in my 1980 - 1987 chevy truck. I hate the bench seat and i want a cool ratchet shifter on the floor. how much modifacation will it need to work(seats)

08-19-2002, 02:07 PM	#3
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	How about Astro Van seats? Astro seats in a Blazer __________________ Gerardo a.k.a. Mad Chemist Silverado XST videos

08-19-2002, 10:06 PM	#4
arty52002 Registered User Join Date: Jul 2002 Location: san diego california Posts: 20	seats I put some bucket seats out of an Eagle Talon in my truck. The base from the seats was just the right heigth. They looked really sharp, and I got mine from a salvage yard, they looked brand new, and I only gave fifty dollars for them.

08-31-2002, 05:10 PM	#5
69Custom Registered User Join Date: Mar 2000 Location: Elizabethtown ,PA,USA Posts: 347	I had a 83 C10 SWB that I installed bucket in. I used the frame rails out of the suburban since the floor pan is the same. I also cut the front support out too (you will see what I mean if you take a look at a suburban in a junk yard). I then got seats out of a Ford Aerostar van. I can tell you that they were very confortable and they even had a arm rest. If you have any questions you can email me or pm me. __________________ 1972 Chevy C-10 Short Stepside 6Cyl, 3 spd, not opts (Current Project) Now a 2004 SSR 5.3L with 4L60E Now Ididit tilt- ps, pb 2002 Saturn L200 2006 Toyota Highlander HYBRID

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

08-16-2002, 10:27 PM	#2
bradshop Registered User Join Date: May 2002 Location: Reidsville, NC USA Posts: 19	Well..... I have a 85 chevy..C-30 and I recently installed bucket seats in it. I now also have added a star shifter from B&M. I got my seats from JC Whitney. They run betwen $600 & $700. They are really sweet. They come with a hide away cooler under the middle seat.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.