1972 4x2 4x4 conversion - The 1947 - Present Chevrolet & GMC Truck Message Board Network

windele · 08-18-2002, 11:23 AM

I have inherited a 1972 Super Cheyene 4x4 that has a cab with a lot of rust (doors, lower door posts, lower fenders, and several dents on the outside of the bed.

My question is: Can I purchase a rust free 1/2 ton long bed and use the 4x4 running gear of my fathers P/U, and what major problems will I have.

Thanks for your help in advance.

Looks like a great site.

Larry Winder

slam33 · 08-18-2002, 11:38 AM

going from a 2x4 to a 4x4 is major work and ussually not worth the time. I would swap all the good sheetmetal to the 4x4 from a 2x4.

08-18-2002, 11:23 AM	#1
windele Registered User Join Date: Aug 2002 Posts: 2	1972 4x2 4x4 conversion I have inherited a 1972 Super Cheyene 4x4 that has a cab with a lot of rust (doors, lower door posts, lower fenders, and several dents on the outside of the bed. My question is: Can I purchase a rust free 1/2 ton long bed and use the 4x4 running gear of my fathers P/U, and what major problems will I have. Thanks for your help in advance. Looks like a great site. Larry Winder __________________ LARRY

08-18-2002, 11:38 AM	#2
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	going from a 2x4 to a 4x4 is major work and ussually not worth the time. I would swap all the good sheetmetal to the 4x4 from a 2x4. __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.