Painless Re-Wire PICs - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ClassicRedneck05 · 12-20-2006, 05:52 PM

here are some of my rewire pics using the Painless set have a few more to come

ClassicRedneck05 · 12-20-2006, 05:53 PM

here is the last one from the other set still have some bigger ones

71chevytruckguy · 12-20-2006, 06:20 PM

looks like fun. i gonna have to re wire my '71 whenever i get it done. not to change the subject, but what kind of wheels are those? i've got a set on my '69 the came from a parts truck and don't have a clue what they are. thanks. chris.

ClassicRedneck05 · 12-20-2006, 06:47 PM

here some more

ClassicRedneck05 · 12-20-2006, 06:47 PM

you know i wish i could tell you these things were on it when i got it all i did was put new tires i wish i knew whats the widest tire i can fit onit

Southedisto · 12-20-2006, 07:21 PM

Im rewiring mine now also, but I havent started the dash side. The rims are "gamblers" that is the style anyways, keystone or cragar, dont recall the brand.

ClassicRedneck05 · 12-20-2006, 07:54 PM

ok well these are not the final i have some but waiting to upload but here are a few more

71chevytruckguy · 12-20-2006, 09:50 PM

reckon ill post a thread and see if anybody know. wiring's looking good. chris.

**Boog** · 12-20-2006, 09:50 PM

They also resemble the Champ 500 by Centerline.

cheyenne10 · 12-21-2006, 12:24 AM

Not sure how "painless" that looks. Those pics scare me away from wanting a part of that.

ClassicRedneck05 · 12-21-2006, 01:12 AM

Quote:

Originally Posted by cheyenne10

Not sure how "painless" that looks. Those pics scare me away from wanting a part of that.

lol well it wasnt fun lol and i got a few cuts and it weas pain lol

*MisterMan* · 12-21-2006, 01:23 AM

wow. wish i had that kit.. looks good!!

ClassicRedneck05 · 12-21-2006, 01:51 AM

wait till i gt the pix of how it looks now on here its a lot nicer hope yall will like

Southedisto · 12-21-2006, 09:15 AM

Did the fuse block mount in the stock location without any mods?

ClassicRedneck05 · 12-21-2006, 01:38 PM

Quote:

Originally Posted by Southedisto

Did the fuse block mount in the stock location without any mods?

no it did not mount perfectly because i got the 18circuit setup i did have to make the hole in the firewall a little bigger which was not easy since i didnt have the right toold at the time it could have came out a LOT better if i was at my shop but ya cant really tell i dont think

Southedisto · 12-21-2006, 02:40 PM

Quote:

Originally Posted by ClassicRedneck05

no it did not mount perfectly because i got the 18circuit setup i did have to make the hole in the firewall a little bigger which was not easy since i didnt have the right toold at the time it could have came out a LOT better if i was at my shop but ya cant really tell i dont think

Seems like they would have a template for the fuse block.

Well I found the template, my manual doesnt have it, kind of strange.

**Hart_Rod** · 12-21-2006, 10:04 AM

Here's a copy of the installation manual and wiring forum:

http://www.painlesswiring.com/Manuals/90510Manual.pdf
http://www.painlesswiring.com/forum/index.php

12-20-2006, 05:52 PM	#1
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Painless Re-Wire PICs here are some of my rewire pics using the Painless set have a few more to come Attached Images

12-20-2006, 05:53 PM	#2
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: Painless Re-Wire PICs here is the last one from the other set still have some bigger ones Attached Images

12-20-2006, 06:20 PM	#3
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Painless Re-Wire PICs looks like fun. i gonna have to re wire my '71 whenever i get it done. not to change the subject, but what kind of wheels are those? i've got a set on my '69 the came from a parts truck and don't have a clue what they are. thanks. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

12-20-2006, 06:47 PM	#4
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: Painless Re-Wire PICs here some more Attached Images

12-20-2006, 06:47 PM	#5
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: Painless Re-Wire PICs you know i wish i could tell you these things were on it when i got it all i did was put new tires i wish i knew whats the widest tire i can fit onit

12-20-2006, 07:21 PM	#6
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: Painless Re-Wire PICs Im rewiring mine now also, but I havent started the dash side. The rims are "gamblers" that is the style anyways, keystone or cragar, dont recall the brand. __________________ I like wheelin in Dixie!

12-20-2006, 07:54 PM	#7
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: Painless Re-Wire PICs ok well these are not the final i have some but waiting to upload but here are a few more Attached Images

12-20-2006, 09:50 PM	#8
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Painless Re-Wire PICs reckon ill post a thread and see if anybody know. wiring's looking good. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's

12-20-2006, 09:50 PM	#9
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,514	Re: Painless Re-Wire PICs They also resemble the Champ 500 by Centerline. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

12-21-2006, 12:24 AM	#10
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,512	Re: Painless Re-Wire PICs Not sure how "painless" that looks. Those pics scare me away from wanting a part of that. __________________ Bob

12-21-2006, 01:23 AM	#12
MisterMan Account Suspended Join Date: Jan 2006 Location: Visalia, California Posts: 286	Re: Painless Re-Wire PICs wow. wish i had that kit.. looks good!!

12-21-2006, 01:51 AM	#13
ClassicRedneck05 Senior Member Join Date: Dec 2005 Location: Humble, Texas Posts: 262	Re: Painless Re-Wire PICs wait till i gt the pix of how it looks now on here its a lot nicer hope yall will like

12-21-2006, 09:15 AM	#14
Southedisto River life...... Join Date: Oct 2005 Location: Soldotna AK Posts: 1,078	Re: Painless Re-Wire PICs Did the fuse block mount in the stock location without any mods? __________________ I like wheelin in Dixie!

12-21-2006, 10:04 AM	#17
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Painless Re-Wire PICs Here's a copy of the installation manual and wiring forum: http://www.painlesswiring.com/Manuals/90510Manual.pdf http://www.painlesswiring.com/forum/index.php __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.