![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2002
Location: Tri Valley California
Posts: 792
|
![]()
I have a freind that has a 72 and he want me to get him some drop spindles with my wholesale account butthe only thing is that the company I have my account with only sells 73 DJM drop spindles. None for the 67-72. What do I got to do to make those work with his existing disc brakes.
|
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Jan 2002
Location: Slippery Rock PA USA
Posts: 1,692
|
your spindle should bolt right in i have 80 spindles on my truck but youll have to get 73 and up calipers not sure if the 72 rotors will fit the 73 spindle
__________________
Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!) |
![]() |
![]() |
![]() |
#3 |
So Many Ideas, So Little Money
Join Date: Sep 2001
Location: Marshalltown, IA
Posts: 1,610
|
I thought it took 73+ ball joints, rotor, caliper. I think someday I'll use 73+ drop spindels too, you can get them in a 3" drop spindel
__________________
72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu ![]() Marshalltown, Iowa |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jun 2002
Location: NW ARKANSAS
Posts: 258
|
The 71-72 ball joints are different.Thers's just enough difference in the stud length that they mill not work.The 73-up ball joints will be cheaper too.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
![]() Join Date: Jun 2002
Location: Kansas
Posts: 702
|
I put "73" up, droped spindles (Western) on m 71 by just changing the upper ball joints and outer tie rod ends, both for 73 up chevy PU. Stock 71 rotors, bearings, calipers all worked fine. Been four years now and still working great.
__________________
The kid Build threads: 51 Jimmy http://67-72chevytrucks.com/vboard/s...d.php?t=154951 http://67-72chevytrucks.com/vboard/s...d.php?t=219902 http://www.classictrucks.com/feature...uck/index.html 68 C10 http://67-72chevytrucks.com/vboard/s...ad.php?t=50348 |
![]() |
![]() |
![]() |
#6 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
yeah, the lower joints are same 71-up, would need the 73-up rods, may be possible to swap the 72 calipers to the 73 spindles so hoses could be left alone, maybe..
not sure, its been too long now,, good luck |
![]() |
![]() |
![]() |
#7 |
SLICER AND DICIER
Join Date: May 2001
Location: Quuen Creek
Posts: 1,383
|
![]()
Kid, has it right.
Upper ball joint, and outer tie rod. All calipers and roters work fine. Been there done that. A couple of times, LOL ![]()
__________________
01 Tahoe 22's 2/4 drop and tv's ![]() 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck) |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jul 2002
Location: Saint Paul Minnesota
Posts: 53
|
Yeah, I just got done putting on drop spindles for a 73' on my 72. All that was needed, was new upper ball joints, and tie rod ends. They fit real well. I got mine from NSANE68. They are very nice.
__________________
72 Chevy Longbed. Being bagged and shaved. To be Completed by Carcraft 03 |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2002
Location: Slippery Rock PA USA
Posts: 1,692
|
i used 72 upper and lower balljoints with my 80 spindles with no problem...did i just get lucky?
__________________
Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!) |
![]() |
![]() |
![]() |
#10 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
mooneyes4b i used 72 upper and lower balljoints with my 80 spindles with no problem...did i just get lucky?
upper balljoints n 71 and 72 are different design from 73-87, lowers are same part however, the difference from 72 to 73 uppers would be in the stud length and/or diameter, either too many threadsshowing or not enough, or loose fit into the spoindle tapered hole, or too tight fit in it, id be worried and find out for sure that you have 71 72 uppers and 73-87 spindles, and if so then id be correcting that asap,, good luck |
![]() |
![]() |
![]() |
#11 |
SLICER AND DICIER
Join Date: May 2001
Location: Quuen Creek
Posts: 1,383
|
![]()
Mooneyes, They do fit, however the stud length on the upper ball joint is too long. This in turn does not allow you to seat the cotter pin through the castle nut
__________________
01 Tahoe 22's 2/4 drop and tv's ![]() 68 chevy money pit 51 chevy belair 95 Honda 900RR 05 GMC Siearra (company truck) |
![]() |
![]() |
![]() |
#12 |
Account Suspended
Join Date: May 2000
Location: IL
Posts: 0
|
yeah, that would be the difference in the years of upper joints that i could not recall, its been too long since...
good luck |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|