Parts for sale '72 c-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brak · 12-22-2006, 12:52 AM

I have begun to tear my truck down, in preperation of my frame swap and have a bunch of parts to get rid of, as i have no place to store them, and i would hate to take them to the scrap yard.

Open to reasonable offers

Front fenders - $75 each Driver condition, slight rot on the inside front corner (not visible when installed on vehicle

Long Bed - $150 Solid, rear corners (below the tail lights) are pretty beat up, driver quality.

Big ugly rear bumper SOLD

LWB Frame - $200

Tailgate - $50 Fleetside, dented but repairable, looks like it has some bondo already.

Tube Grille SOLD

Tilt Steering column - $75 later model design with ignition switch in the column. it appears to have been modified to remove the column mounted shifter.

Bench Seat - FREE not sure what it came from, Maroon, with Seatcover installed

These parts are located in MN near minneapolis.

Green Machine · 12-22-2006, 12:58 AM

May be interested in the box, what condition is the floor in ??

brak · 12-26-2006, 04:27 PM

Quote:

Originally Posted by Green Machine

May be interested in the box, what condition is the floor in ??

here are some pics inside the bed. sorry it took so long, but it was snowing when i took the other pics, and the bed was full of leaves and parts. The floor is solid with the exception of two spots by the tailgate (pics included), I couldn't get a good pic underneath, but all the bed supports look excellent.

Bed floor Rear

Bed floor Front

Front right corner

Front left corner

Rust spot right side

Rust spot left side

brak · 12-22-2006, 01:08 AM

The bed looks rusty, but seems solid, not sure about the supports underneath though, as i havent looked underneath it in a long time. I'll clear it out tomorrow, and get some better pics, I've attached a couple general pics to the description

I forgot to mention that this truck has been sitting at my grandparents house in california (high desert) untill about 6 months ago when i hauled it up here. so it's not your typical midwest truck. I doubt it's ever seen salt.

krue · 12-22-2006, 01:15 AM

Please post prices.

brak · 12-22-2006, 01:28 AM

Quote:

Originally Posted by krue

Please post prices.

DONE

**Don Brace** · 12-22-2006, 09:16 AM

I am looking for a radiator support. Do you have one or know of one for sale?
Thanks

brak · 12-22-2006, 10:07 AM

Quote:

Originally Posted by Don Brace

I am looking for a radiator support. Do you have one or know of one for sale?
Thanks

Sorry, I will be reusing my rad support.

el curioso · 12-22-2006, 12:10 PM

Ill take the front grill .please post close up pics and shipping quote to 79928

el curioso · 12-23-2006, 04:38 PM

what the word on the shipping or the pics?

brak · 12-24-2006, 12:32 AM

I have added pics to the description, sorry for the delay, but i left town for the weekend, and internet has been sketchy.

el curioso - here are some additional pictures, i tried to get as much detail as possible, including the mounting bracket attached to the Radiatior support.

Close Right

Close Left

Close Backside

Full Backside

Mounting bracket

bad72c10 · 12-26-2006, 08:46 PM

Do you still have the grille? It comes with the mounting stuff, right? How much would shipping be to 87104? I will probably take it off your hands if you still have it. Thanks, Justin

**truckdude239** · 12-27-2006, 02:16 AM

darn wish i was closer

brak · 12-27-2006, 02:20 AM

Quote:

Originally Posted by truckdude239

darn wish i was closer

What do you need. most of this can be shipped rather cheaply if you don't need it the next day.

el curioso · 12-27-2006, 03:40 AM

Do you know what the shipping will be and do you take pay pal?

mrein3 · 12-27-2006, 11:32 AM

Is the bed still available? PM sent.

rsorrowjr · 12-27-2006, 01:29 PM

How much for shipping the tailgate to 30157

brak · 12-27-2006, 04:03 PM

mrein3 - PM Replied

rsorrowjr - Due to the size and weight, i'd think that it would need to be palleted and shipped through a freight company, but I'll see if i can get an estimate from UPS and USPS.

el curioso - PM Sent

**truckdude239** · 12-27-2006, 03:48 PM

i would like the bed but i got one here for 200 alot closer

brak · 12-28-2006, 06:57 PM

Bumper is gone

rsorrowjr - I'll pm you the shipping quote tonight

Anybody else?
Help me eliminate a potential junk pile, my neighbors won't be happy about.

laidout · 12-28-2006, 10:55 PM

what would you take for the front dust covers that bolts to the spindles

brak · 12-29-2006, 01:31 AM

laidout - I will be reusing all the suspension components. sorry.

QKENUF4U - yes it was installed in the truck using the stock intermediate shaft. the brackets attached to the column, were bolted directly to the stock mounting holes in the dash. Previous owner made a harness adapter that goes with it. The column seems to be wider than the stock unit, as the previous owner trimmed a little bit of the cluster to make it fit. something i didn't notice until after i removed the column.

one thing i didn't mention is that the signal arm is bent (you can see it in the second pic) and i don't know if the switch itself would need to be replaced, as i only drove the truck once, and that was 5 years ago.

QKENUF4U · 12-29-2006, 12:48 AM

hey
was that column in your truck and already hooked up ?
thanks
lance

12-22-2006, 12:52 AM	#1
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Parts for sale '72 c-10 I have begun to tear my truck down, in preperation of my frame swap and have a bunch of parts to get rid of, as i have no place to store them, and i would hate to take them to the scrap yard. Open to reasonable offers Front fenders - $75 each Driver condition, slight rot on the inside front corner (not visible when installed on vehicle Long Bed - $150 Solid, rear corners (below the tail lights) are pretty beat up, driver quality. Big ugly rear bumper SOLD LWB Frame - $200 Tailgate - $50 Fleetside, dented but repairable, looks like it has some bondo already. Tube Grille SOLD Tilt Steering column - $75 later model design with ignition switch in the column. it appears to have been modified to remove the column mounted shifter. Bench Seat - FREE not sure what it came from, Maroon, with Seatcover installed These parts are located in MN near minneapolis. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 12-28-2006 at 06:54 PM.

12-22-2006, 12:58 AM	#2
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: Parts for sale '72 c-10 May be interested in the box, what condition is the floor in ?? __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

12-22-2006, 01:08 AM	#4
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Parts for sale '72 c-10 The bed looks rusty, but seems solid, not sure about the supports underneath though, as i havent looked underneath it in a long time. I'll clear it out tomorrow, and get some better pics, I've attached a couple general pics to the description I forgot to mention that this truck has been sitting at my grandparents house in california (high desert) untill about 6 months ago when i hauled it up here. so it's not your typical midwest truck. I doubt it's ever seen salt. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 12-22-2006 at 01:11 AM.

12-22-2006, 01:15 AM	#5
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Parts for sale '72 c-10 Please post prices. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-22-2006, 09:16 AM	#7
Don Brace Active Member Join Date: Nov 2002 Location: Clarks Grove MN Posts: 487	Re: Parts for sale '72 c-10 I am looking for a radiator support. Do you have one or know of one for sale? Thanks __________________ Don Brace 55 Nomad 56 Nomad 58 Impalla Coupe 58 Bel-Aire 4D HT 61 Impala CVRT 409 4 SP 2- 71 Longhorns Always looking for old toy trains, Juke boxes Pin ball and game machines.

12-22-2006, 12:10 PM	#9
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	Re: Parts for sale '72 c-10 Ill take the front grill .please post close up pics and shipping quote to 79928 __________________ 1969 Chevy C-10 350/700r4

12-23-2006, 04:38 PM	#10
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	Re: Parts for sale '72 c-10 what the word on the shipping or the pics? __________________ 1969 Chevy C-10 350/700r4

12-24-2006, 12:32 AM	#11
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Parts for sale '72 c-10 I have added pics to the description, sorry for the delay, but i left town for the weekend, and internet has been sketchy. el curioso - here are some additional pictures, i tried to get as much detail as possible, including the mounting bracket attached to the Radiatior support. Close Right Close Left Close Backside Full Backside Mounting bracket __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

12-26-2006, 08:46 PM	#12
bad72c10 Registered User Join Date: Dec 2006 Location: New Mexico Posts: 88	Re: Parts for sale '72 c-10 Do you still have the grille? It comes with the mounting stuff, right? How much would shipping be to 87104? I will probably take it off your hands if you still have it. Thanks, Justin

12-27-2006, 02:16 AM	#13
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Parts for sale '72 c-10 darn wish i was closer __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

12-27-2006, 03:40 AM	#15
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	Re: Parts for sale '72 c-10 Do you know what the shipping will be and do you take pay pal? __________________ 1969 Chevy C-10 350/700r4

12-27-2006, 11:32 AM	#16
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,254	Re: Parts for sale '72 c-10 Is the bed still available? PM sent. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

12-27-2006, 01:29 PM	#17
rsorrowjr Junior Member Join Date: Oct 2006 Location: georgia Posts: 73	Re: Parts for sale '72 c-10 How much for shipping the tailgate to 30157 __________________ 1971 GMC 4x4 SWB 1970 GMC LWB 2002 Mustang GT 2004 Honda VTX 1800c

12-27-2006, 04:03 PM	#18
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Parts for sale '72 c-10 mrein3 - PM Replied rsorrowjr - Due to the size and weight, i'd think that it would need to be palleted and shipped through a freight company, but I'll see if i can get an estimate from UPS and USPS. el curioso - PM Sent __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

12-27-2006, 03:48 PM	#19
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,238	Re: Parts for sale '72 c-10 i would like the bed but i got one here for 200 alot closer __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube



Register or Log In To remove these advertisements.

12-28-2006, 06:57 PM	#20
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Parts for sale '72 c-10 Bumper is gone rsorrowjr - I'll pm you the shipping quote tonight Anybody else? Help me eliminate a potential junk pile, my neighbors won't be happy about. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

12-28-2006, 10:55 PM	#21
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: Parts for sale '72 c-10 what would you take for the front dust covers that bolts to the spindles

12-29-2006, 01:31 AM	#22
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Parts for sale '72 c-10 laidout - I will be reusing all the suspension components. sorry. QKENUF4U - yes it was installed in the truck using the stock intermediate shaft. the brackets attached to the column, were bolted directly to the stock mounting holes in the dash. Previous owner made a harness adapter that goes with it. The column seems to be wider than the stock unit, as the previous owner trimmed a little bit of the cluster to make it fit. something i didn't notice until after i removed the column. one thing i didn't mention is that the signal arm is bent (you can see it in the second pic) and i don't know if the switch itself would need to be replaced, as i only drove the truck once, and that was 5 years ago. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 12-29-2006 at 01:35 AM.

12-29-2006, 12:48 AM	#23
QKENUF4U Senior Member Join Date: Jan 2005 Location: SUNNY WARM BIKE RIDING COTTONWOOD ARIZONA Posts: 2,097	Re: Parts for sale '72 c-10 hey was that column in your truck and already hooked up ? thanks lance

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.