WTB auto cross member for a 1 ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

woodridge · 01-29-2007, 07:30 PM

It just dawned on me today as I was preparing to pull the cab and front end off the ton that I don't have a cross member, anybody have one?

**uncle** · 01-29-2007, 07:51 PM

I'm pretty sure all you need are some spacers.

sixtysevengmc · 01-29-2007, 08:37 PM

I've got a auto crossmember for a 1/2 ton,don't know if it would work on a 1 ton though

I'm not far from you

woodridge · 01-29-2007, 09:38 PM

Uncle, is the spacer thing factory? I had thought about using spacers but didn't know. Sixtyseven I will keep that in mind.

**uncle** · 01-29-2007, 09:41 PM

I'm pretty sure it is. All longhorns have them also. I saw 1 on ebay a week or so ago. You might try a search on completed listings for spacer.

woodridge · 01-29-2007, 10:45 PM

Will do, thanks.

HuggerCST · 01-29-2007, 11:00 PM

I've got one from a 3/4 ton that's yours if you want it David, just let me know.

Longhorn Man · 01-30-2007, 01:05 AM

the cross member is the same 1/2 ton through one ton... but one ton trucks and longhorns, need a spacer. I have a set here somewhere, sandblasted and painted.

HuggerCST · 01-30-2007, 10:14 AM

Quote:

Originally Posted by Longhorn Man

the cross member is the same 1/2 ton through one ton... but one ton trucks and longhorns, need a spacer. I have a set here somewhere, sandblasted and painted.

Thanks Andy, that's what I was thinking, but I didn't want to post without being sure.

Americanrider · 01-30-2007, 02:56 PM

$40 + shipping. Pulled from 71 C-30 Custom Camper, has spacers on it already. I can clean before shipping it.

edit: that thing hanging on the bottom is a home-made heat shield, I'll pull it off.

woodridge · 01-30-2007, 02:55 PM

Andy, can you get a pic of the spacers and dimensions?
Hugger, Thanks I will let you know.

woodridge · 01-30-2007, 11:36 PM

Americanrider, that is tempting but I think freight might be too much. I have a lead on a cross member here local, now just need the spacers or specs to make them. I know I opened the door for this and before somone says it the spacer would be the difference between the height of the two frame. I'm more interested in what they look like so the ones I make will look correct.

Americanrider · 01-31-2007, 02:13 AM

I'll take a pic and measure it for ya.

woodridge · 01-31-2007, 02:38 PM

Thanks! Can you put a ruler in the pic for referance?

**67sss** · 01-31-2007, 04:09 PM

here are the spacers you need. get em from Andy or whoever responded first. this is just a pic for you.

woodridge · 01-31-2007, 05:21 PM

I now have a crossmember but after seeing 67sss's pic I think I would rather buy than make so I am still needing the spacers. Andy, since you were first, are yours for sale? Americanrider? 67sss? I'm not particular from whom, just want to be fair.

Americanrider · 01-31-2007, 06:19 PM

C-30 AT crossmember brace.

1.5 inches wide
2 inches tall
9.75 long

Didn't realize someone beat me to it... oh well. If Andy don't find his I'll sell mine.

**67sss** · 02-01-2007, 11:08 PM

$30 for the pair to your door. let me know.
Thanks!

Longhorn Man · 02-02-2007, 10:19 PM

Mine are sand blasted, painted and cleaned. (not in that particular order)
They are in a box ready to ship... 45 to your door, I would give them an 8 out of 10 on condition... some manir pitting and just shy of perfection on the paint.
All 4 grade 5 3/8 bolts with flat and lock washers included too.

woodridge · 02-03-2007, 12:47 AM

Longhorn Man, PM sent.
Thanks Everyone.

Longhorn Man · 02-05-2007, 12:05 AM

pics...

woodridge · 02-05-2007, 09:13 AM

Thanks for the pics, PM sent.

01-29-2007, 07:30 PM	#1
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	WTB auto cross member for a 1 ton It just dawned on me today as I was preparing to pull the cab and front end off the ton that I don't have a cross member, anybody have one? __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-29-2007, 07:51 PM	#2
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: WTB auto cross member for a 1 ton I'm pretty sure all you need are some spacers.

01-29-2007, 08:37 PM	#3
sixtysevengmc village idiot Join Date: Oct 2006 Location: Barbourville,KY Posts: 176	Re: WTB auto cross member for a 1 ton I've got a auto crossmember for a 1/2 ton,don't know if it would work on a 1 ton though I'm not far from you Last edited by sixtysevengmc; 01-29-2007 at 08:38 PM.

01-29-2007, 09:38 PM	#4
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton Uncle, is the spacer thing factory? I had thought about using spacers but didn't know. Sixtyseven I will keep that in mind. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-29-2007, 09:41 PM	#5
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,288	Re: WTB auto cross member for a 1 ton I'm pretty sure it is. All longhorns have them also. I saw 1 on ebay a week or so ago. You might try a search on completed listings for spacer.

01-29-2007, 10:45 PM	#6
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton Will do, thanks. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-29-2007, 11:00 PM	#7
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: WTB auto cross member for a 1 ton I've got one from a 3/4 ton that's yours if you want it David, just let me know. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

01-30-2007, 01:05 AM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: WTB auto cross member for a 1 ton the cross member is the same 1/2 ton through one ton... but one ton trucks and longhorns, need a spacer. I have a set here somewhere, sandblasted and painted.

01-30-2007, 02:56 PM	#10
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: WTB auto cross member for a 1 ton $40 + shipping. Pulled from 71 C-30 Custom Camper, has spacers on it already. I can clean before shipping it. edit: that thing hanging on the bottom is a home-made heat shield, I'll pull it off. Attached Images Last edited by Americanrider; 01-30-2007 at 02:57 PM.

01-30-2007, 02:55 PM	#11
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton Andy, can you get a pic of the spacers and dimensions? Hugger, Thanks I will let you know. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-30-2007, 11:36 PM	#12
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton Americanrider, that is tempting but I think freight might be too much. I have a lead on a cross member here local, now just need the spacers or specs to make them. I know I opened the door for this and before somone says it the spacer would be the difference between the height of the two frame. I'm more interested in what they look like so the ones I make will look correct. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-31-2007, 02:13 AM	#13
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: WTB auto cross member for a 1 ton I'll take a pic and measure it for ya.

01-31-2007, 02:38 PM	#14
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton Thanks! Can you put a ruler in the pic for referance? __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

01-31-2007, 04:09 PM	#15
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	Re: WTB auto cross member for a 1 ton here are the spacers you need. get em from Andy or whoever responded first. this is just a pic for you. Attached Images

01-31-2007, 05:21 PM	#16
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton I now have a crossmember but after seeing 67sss's pic I think I would rather buy than make so I am still needing the spacers. Andy, since you were first, are yours for sale? Americanrider? 67sss? I'm not particular from whom, just want to be fair. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet Last edited by woodridge; 01-31-2007 at 05:23 PM.



Register or Log In To remove these advertisements.

01-31-2007, 06:19 PM	#17
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: WTB auto cross member for a 1 ton C-30 AT crossmember brace. 1.5 inches wide 2 inches tall 9.75 long Didn't realize someone beat me to it... oh well. If Andy don't find his I'll sell mine. Attached Images Last edited by Americanrider; 01-31-2007 at 06:21 PM.

02-01-2007, 11:08 PM	#18
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,325	Re: WTB auto cross member for a 1 ton $30 for the pair to your door. let me know. Thanks!

02-02-2007, 10:19 PM	#19
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: WTB auto cross member for a 1 ton Mine are sand blasted, painted and cleaned. (not in that particular order) They are in a box ready to ship... 45 to your door, I would give them an 8 out of 10 on condition... some manir pitting and just shy of perfection on the paint. All 4 grade 5 3/8 bolts with flat and lock washers included too.

02-03-2007, 12:47 AM	#20
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton Longhorn Man, PM sent. Thanks Everyone. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

02-05-2007, 12:05 AM	#21
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: WTB auto cross member for a 1 ton pics... Attached Images

02-05-2007, 09:13 AM	#22
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: WTB auto cross member for a 1 ton Thanks for the pics, PM sent. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.