Need help with engine pulleys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

KAILUAZ · 02-27-2007, 12:22 PM

Here are some pics of the PO's pulley setup. I have no clue what these went to. I only need pulleys for the alt and ps, as I'm removing the non-working a/c. As you can see in the one pic the ps pump is not lining up and is at an angle. You can see the PO's attempt to fix it with those spacers.
I need to know the correct setup (well, with the long water pump that is).
Also I do not know if this is the correct fan, I think it may be off a newer vehicle.
Thanks.

3/4tonterror · 02-27-2007, 12:46 PM

the problem is that the pump is designed to be used with a short waterpump but you have a long waterpump, change the steering pump to a modern one and it should line up.

KAILUAZ · 02-27-2007, 12:58 PM

Quote:

Originally Posted by 3/4tonterror

the problem is that the pump is designed to be used with a short waterpump but you have a long waterpump, change the steering pump to a modern one and it should line up.

Should I just go back to a short water pump? What year ps pump would work?

3/4tonterror · 02-27-2007, 01:25 PM

you can go either way, newer steering pump or short water pump. you just need to now that ther not compatible with each other, short waterpump requires different pullys and different alt bracket.it looks like the easy thing is to get a modern [steering pump for long waterpump]pump cause you allready have long waterpump and correct alt bracket.

**john** · 02-27-2007, 03:09 PM

Most of the long pump P.S. pump brackets will bolt through this hole. Then there will be a bracket from rear of pump to exhaust manifold bolt. Similar to pic.

KAILUAZ · 02-28-2007, 01:09 PM

Where can I get new pulleys and the right brackets? I want this to be set up the right way (long water pump).
Thanks.

**john** · 02-28-2007, 01:22 PM

Im not sure of all the years that will work, but mid to late seventies for sure. There are two types. some water pumps have a bored hole ,others have a threaded hole. My truck has a bored hole with a bolt that goes through it. The P.S. bracket is U shaped to fit the water pump boss and is threaded on the backside. The pully on the new pump should work.

KAILUAZ · 03-02-2007, 11:28 AM

Any idea where I can buy new parts to get the right setup?

1restorick · 03-02-2007, 11:27 PM

I just installed a power steering pump on my 350 small block with the Long Water pump. I used the brackets from March Performance. The pulleys lined up perfect.

Here's a link:

http://static.summitracing.com/globa.../mch-20160.pdf

02-27-2007, 12:22 PM	#1
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Need help with engine pulleys Here are some pics of the PO's pulley setup. I have no clue what these went to. I only need pulleys for the alt and ps, as I'm removing the non-working a/c. As you can see in the one pic the ps pump is not lining up and is at an angle. You can see the PO's attempt to fix it with those spacers. I need to know the correct setup (well, with the long water pump that is). Also I do not know if this is the correct fan, I think it may be off a newer vehicle. Thanks. __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics

02-27-2007, 12:46 PM	#2
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: Need help with engine pulleys the problem is that the pump is designed to be used with a short waterpump but you have a long waterpump, change the steering pump to a modern one and it should line up.

02-27-2007, 01:25 PM	#4
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: Need help with engine pulleys you can go either way, newer steering pump or short water pump. you just need to now that ther not compatible with each other, short waterpump requires different pullys and different alt bracket.it looks like the easy thing is to get a modern [steering pump for long waterpump]pump cause you allready have long waterpump and correct alt bracket.

02-27-2007, 03:09 PM	#5
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Need help with engine pulleys Most of the long pump P.S. pump brackets will bolt through this hole. Then there will be a bracket from rear of pump to exhaust manifold bolt. Similar to pic. Attached Images __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

02-28-2007, 01:09 PM	#6
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Re: Need help with engine pulleys Where can I get new pulleys and the right brackets? I want this to be set up the right way (long water pump). Thanks. __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics

02-28-2007, 01:22 PM	#7
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Need help with engine pulleys Im not sure of all the years that will work, but mid to late seventies for sure. There are two types. some water pumps have a bored hole ,others have a threaded hole. My truck has a bored hole with a bolt that goes through it. The P.S. bracket is U shaped to fit the water pump boss and is threaded on the backside. The pully on the new pump should work. __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

03-02-2007, 11:28 AM	#8
KAILUAZ King of Rust Join Date: Jul 2005 Location: St Petersburg, FL Posts: 359	Re: Need help with engine pulleys Any idea where I can buy new parts to get the right setup? __________________ 1970 GMC 2500, 350, TH400, front disks, thats it! My Pics

03-02-2007, 11:27 PM	#9
1restorick Registered User Join Date: Feb 2007 Location: South West Pennsylvania Posts: 164	Re: Need help with engine pulleys I just installed a power steering pump on my 350 small block with the Long Water pump. I used the brackets from March Performance. The pulleys lined up perfect. Here's a link: http://static.summitracing.com/globa.../mch-20160.pdf __________________ RED RUMBLE 1963 C10 Chevy Truck Owned since 1984

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.