|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
03-02-2007, 07:12 PM
|
#1 |
|
Registered User
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
|
Getting new speedo cable in?
I just got the old speedo out by pulling it out towards the engine compartment. How do I get the new one back in thru the seal? Also what do I lube the new cable with??
__________________
Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 |
|
|
|
03-02-2007, 07:28 PM
|
#2 |
|
Until Seventy Times Seven
Join Date: Feb 2005
Location: Rocky Mountain Front Range
Posts: 1,301
|
Re: Getting new speedo cable in?
Pull the grommet out of the firewall and first fish the cable through the grommet and then placed the grommet back in the firewall. The new cable should have came with a pasty lube.
I've tried a recommended dry graphite lube, but I haven't noticed a difference.
__________________
boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin... |
|
|
|
|
03-02-2007, 07:46 PM
|
#3 |
|
Registered User
Join Date: Feb 2003
Location: Midwest City, OK
Posts: 1,001
|
Re: Getting new speedo cable in?
I haven't bought the cable yet so I didn't realize about the prepackaged lube. I'll be sure and check for it. I heard about using the dry graphite too.
Thanks!
__________________
Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007 |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
