sway bar braket? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cstm68 · 03-02-2007, 11:10 PM

i pulled a sway bar off of my parts truck and i am buying all new bushings for it. do i need to grind the braket off the parts truck frame that brings the sway bar down about 3 inches or can i just bolt it to the frame???

dave2953 · 03-02-2007, 11:18 PM

I think you have to use the bracket to install it, but I'm not 100%. You can buy a bracket for lowered trucks that doesn't hang as low as factory. Hope this helps.

Frizzle Fry · 03-03-2007, 12:19 AM

I didn't use brackets. No issues:

Bob Moore · 03-03-2007, 01:07 AM

Fizzle - that looks like a BIG bar - 1 1/4"?

68 You can do it that way. You can do it with brackets. ECE also makes brackets for lowered trucks - it winds up inbetween the stock bracket and no bracket. Check out their online catalog.

The 1 1/4" bar is available on C30's and crew cabs. I'm not sure how much more anti sway you get but it is like 3 times the 1/2T bar.

Frizzle Fry · 03-03-2007, 01:29 PM

Yes it's a 1 1/4" bar. I HIGHLY recommend it. I went from a 1 1/8 with stock bushings to the 1 1/4 with poly bushings and it made a huge difference! The 1/14 bars are also on the 73-87 3/4ton and up trucks.

LUV2XCLR8 · 03-03-2007, 01:45 PM

I have one of each Diameter, both useless, My truck is Bagged, anyways
pretty much what everyone has said above is correct, either way works.

Frizzle Fry · 03-03-2007, 04:18 PM

Quote:

Originally Posted by LUV2XCLR8

I have one of each Diameter, both useless, My truck is Bagged, anyways
pretty much what everyone has said above is correct, either way works.

What do you mean useless?

LUV2XCLR8 · 03-03-2007, 07:17 PM

Quote:

Originally Posted by Frizzle Fry

What do you mean useless?

My front travels up and down 7" and I still can go another 1"
Will the ends of the bar stay in the lower control arms? I've
been told they will not, alas I have not actually tried it yet.

Tx Firefighter · 03-03-2007, 01:45 PM

I did an FAQ article on the front swaybar with different options for mounting and such. It's in the FAQ if you want to read it.

ChevyDude · 03-03-2007, 02:01 PM

I didn't know you could do that??? I got my lowered brackets from ECE.

Frizzle Fry · 03-03-2007, 08:12 PM

I see what you're saying. I've always heard that having bags gives you more of a need for a sway bar. But I don't know about the travel limitations.

LUV2XCLR8 · 03-03-2007, 08:44 PM

Mike,

Yeppers, that's what I don't know either, I would rather use a stock type
if it would work, mainly because the aftermarket stuff ain't very cheap

Craig

03-02-2007, 11:10 PM	#1
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	sway bar braket? i pulled a sway bar off of my parts truck and i am buying all new bushings for it. do i need to grind the braket off the parts truck frame that brings the sway bar down about 3 inches or can i just bolt it to the frame???

03-02-2007, 11:18 PM	#2
dave2953 Dave's not here, man Join Date: Jun 2004 Location: Winder, Georgia Posts: 2,000	Re: sway bar braket? I think you have to use the bracket to install it, but I'm not 100%. You can buy a bracket for lowered trucks that doesn't hang as low as factory. Hope this helps. __________________ - 2014 VW Jetta - 2015 VW Jetta - 1966 Ford F-250

03-03-2007, 12:19 AM	#3
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: sway bar braket? I didn't use brackets. No issues:

03-03-2007, 01:07 AM	#4
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: sway bar braket? Fizzle - that looks like a BIG bar - 1 1/4"? 68 You can do it that way. You can do it with brackets. ECE also makes brackets for lowered trucks - it winds up inbetween the stock bracket and no bracket. Check out their online catalog. The 1 1/4" bar is available on C30's and crew cabs. I'm not sure how much more anti sway you get but it is like 3 times the 1/2T bar. __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

03-03-2007, 01:29 PM	#5
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: sway bar braket? Yes it's a 1 1/4" bar. I HIGHLY recommend it. I went from a 1 1/8 with stock bushings to the 1 1/4 with poly bushings and it made a huge difference! The 1/14 bars are also on the 73-87 3/4ton and up trucks.

03-03-2007, 01:45 PM	#6
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: sway bar braket? I have one of each Diameter, both useless, My truck is Bagged, anyways pretty much what everyone has said above is correct, either way works. __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

03-03-2007, 01:45 PM	#9
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Re: sway bar braket? I did an FAQ article on the front swaybar with different options for mounting and such. It's in the FAQ if you want to read it. __________________ I'm on the Instagram- @Gearhead_Kevin

03-03-2007, 02:01 PM	#10
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: sway bar braket? I didn't know you could do that??? I got my lowered brackets from ECE. __________________ Alex 1971 Lil' Red 350 SBC 700R4

03-03-2007, 08:12 PM	#11
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: sway bar braket? I see what you're saying. I've always heard that having bags gives you more of a need for a sway bar. But I don't know about the travel limitations.

03-03-2007, 08:44 PM	#12
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: sway bar braket? Mike, Yeppers, that's what I don't know either, I would rather use a stock type if it would work, mainly because the aftermarket stuff ain't very cheap Craig __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.