FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

msgross · 03-03-2007, 10:36 AM

all prices OBO, I will send more pics on request... It all goes on Ebay Sunday night....

New Poly tank kit 21 Gallon tank, straps and sending unit ($225 shipped) ($200 picked up)

SOLD - 67-68 Grille

67-68 Steel Grille painted rings ($70 shipped) ($50 picked up) Back has surface rust but front is perfect, except paint that is peeling off

1/2 ton Dana 44 parts (let me know what you need, I have three of them!) open and closed knuckle 3.08's, 3.07's and 3.73's

3/4tonterror · 03-03-2007, 12:07 PM

need dana 44 closed knuckle 3/4 ton passanger side inner/ outer axles. and both locking hubs.

msgross · 03-03-2007, 06:18 PM

Quote:

Originally Posted by 3/4tonterror

need dana 44 closed knuckle 3/4 ton passanger side inner/ outer axles. and both locking hubs.

are 1/2 tons and 3/4 tons the same?

1969k10stepside · 03-03-2007, 12:13 PM

Mike,do you still have any steering stabilizers?

msgross · 03-03-2007, 12:26 PM

I don't have the dual setup anymore but I have one stock stabilizer...

Dana 44's are all 1/2 ton, not sure if they will fit yours...

**Hart_Rod** · 03-03-2007, 03:04 PM

How nice is the grille?

msgross · 03-03-2007, 04:27 PM

Quote:

Originally Posted by Hart_Rod

How nice is the grille?

I'll get pics, when I removed the bowtie from the center I noticed the it was hiding a small dent behind it, wasn't visable with the bowtie.... Has some surface rust behind the grille (normal) and could use stripped from a previous poor paintjob. I could blast the entire thing buy would hate to warp it.

1969k10stepside · 03-03-2007, 06:20 PM

The hubs are different,as are the lockouts.I Think the axle ahafts for the front are the same 3/4 or 1/2 as long as they are both closed knuckle.Im not sure,the 3/4 ton might be more heavy duty though and/or have different splines

*Shane* · 03-03-2007, 06:39 PM

Do you have a PayPal account?

msgross · 03-03-2007, 06:42 PM

Quote:

Originally Posted by Shane

Do you have a PayPal account?

sure do, it's

msgross@hotmail.com

**jerry moss** · 03-03-2007, 07:15 PM

1/2 ton and 3/4 ton axle shafts are same, locking hubs are different.

msgross · 03-03-2007, 07:39 PM

Quote:

Originally Posted by jerry moss

1/2 ton and 3/4 ton axle shafts are same, locking hubs are different.

thanks Jerry, how hard is it to pull those closed knuckles aprart, think that I should keep it around for originality or stay with my disc/open knuckle swap?

**jerry moss** · 03-03-2007, 10:20 PM

Tearing them down is simple since it has kingpins instead of ball joints. i would stick with the open knuckle/ disc front end in your personal truck. around here, the only people who want closed knuckles are mud boggers. i would save any "bolt on" items that are specific to the closed knuckle and scrap the rest. if it's a 3:73 or 4:10, save the ring and pinion/carrier too.

hotrodmtodd · 03-03-2007, 10:24 PM

OK Mike, I will take the grill as per our earlier conversation. Thanks for deciding to sell it again. I will paypal you tonight. Thanks, Mike

*Shane* · 03-03-2007, 10:17 PM

I'm gonna pass on the steel grille rings. Thanks msgross.

msgross · 03-03-2007, 11:06 PM

no problem, let me know and I will save it for your buddy, I am actually driving through Lancaster tomorrow... PM sent with phone #

shaneo2112RUSH · 03-04-2007, 12:06 AM

still have the poly tank for sale!! been looking for one for the bed

msgross · 03-04-2007, 08:16 AM

Tank is still for sale, grille rings too...
grille might be sold pending payment....

msgross · 03-04-2007, 08:23 AM

3/4 ton terror, PM sent on axles....

72shadetree · 03-05-2007, 12:28 AM

i need this draglink or whatever you call it.is it the same as 3/4 ton not sure if mines open or closed knuckle.its a 71 with disk see how the tie rods are offset thats the way mine is.i dont have the stabilizer.

msgross · 03-05-2007, 01:57 PM

Quote:

Originally Posted by 72shadetree

i need this draglink or whatever you call it.is it the same as 3/4 ton not sure if mines open or closed knuckle.its a 71 with disk see how the tie rods are offset thats the way mine is.i dont have the stabilizer.

let me see, the black axle is on top of the knuckle and the others are on bottom... I'll send a measurement but other than that I don't know if it's the same as a 3/4 ton...

Mike

msgross · 03-08-2007, 08:49 PM

ttt

03-03-2007, 10:36 AM	#1
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts all prices OBO, I will send more pics on request... It all goes on Ebay Sunday night.... New Poly tank kit 21 Gallon tank, straps and sending unit ($225 shipped) ($200 picked up) SOLD - 67-68 Grille 67-68 Steel Grille painted rings ($70 shipped) ($50 picked up) Back has surface rust but front is perfect, except paint that is peeling off 1/2 ton Dana 44 parts (let me know what you need, I have three of them!) open and closed knuckle 3.08's, 3.07's and 3.73's Attached Images __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer" Last edited by msgross; 03-05-2007 at 01:59 PM.

03-03-2007, 12:07 PM	#2
3/4tonterror Registered User Join Date: Dec 2006 Location: jaffrey,NH Posts: 325	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts need dana 44 closed knuckle 3/4 ton passanger side inner/ outer axles. and both locking hubs.

03-03-2007, 12:13 PM	#4
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts Mike,do you still have any steering stabilizers?

03-03-2007, 12:26 PM	#5
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts I don't have the dual setup anymore but I have one stock stabilizer... Dana 44's are all 1/2 ton, not sure if they will fit yours... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-03-2007, 03:04 PM	#6
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts How nice is the grille? __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-03-2007, 06:20 PM	#8
1969k10stepside Registered User Join Date: Mar 2006 Location: USA Posts: 21,019	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts The hubs are different,as are the lockouts.I Think the axle ahafts for the front are the same 3/4 or 1/2 as long as they are both closed knuckle.Im not sure,the 3/4 ton might be more heavy duty though and/or have different splines Last edited by 1969k10stepside; 03-03-2007 at 06:21 PM.

03-03-2007, 06:39 PM	#9
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts Do you have a PayPal account?

03-03-2007, 07:15 PM	#11
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts 1/2 ton and 3/4 ton axle shafts are same, locking hubs are different. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-03-2007, 10:20 PM	#13
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts Tearing them down is simple since it has kingpins instead of ball joints. i would stick with the open knuckle/ disc front end in your personal truck. around here, the only people who want closed knuckles are mud boggers. i would save any "bolt on" items that are specific to the closed knuckle and scrap the rest. if it's a 3:73 or 4:10, save the ring and pinion/carrier too. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

03-03-2007, 10:24 PM	#14
hotrodmtodd 'Burban Legend Join Date: Apr 2005 Location: Mingo Junction OH Posts: 918	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts OK Mike, I will take the grill as per our earlier conversation. Thanks for deciding to sell it again. I will paypal you tonight. Thanks, Mike __________________ '67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner

03-03-2007, 10:17 PM	#15
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts I'm gonna pass on the steel grille rings. Thanks msgross.

03-03-2007, 11:06 PM	#16
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts no problem, let me know and I will save it for your buddy, I am actually driving through Lancaster tomorrow... PM sent with phone # __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-04-2007, 12:06 AM	#17
shaneo2112RUSH Junior Member Join Date: Jun 2006 Location: Pueblo,Colo Posts: 424	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts still have the poly tank for sale!! been looking for one for the bed

03-04-2007, 08:16 AM	#18
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts Tank is still for sale, grille rings too... grille might be sold pending payment.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

03-04-2007, 08:23 AM	#19
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts 3/4 ton terror, PM sent on axles.... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"



Register or Log In To remove these advertisements.

03-05-2007, 12:28 AM	#20
72shadetree KEEP ON TRUCKING Join Date: Sep 2000 Location: martinsville va Posts: 2,563	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts i need this draglink or whatever you call it.is it the same as 3/4 ton not sure if mines open or closed knuckle.its a 71 with disk see how the tie rods are offset thats the way mine is.i dont have the stabilizer. Attached Images __________________ 72 cheyenne 2wd lwb 71 k20 sons bassett va

03-08-2007, 08:49 PM	#22
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: FS: Poly tank kit, 67-68 grille, grille rings, DANA 44 parts ttt __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.