The Nicest People you meet In Texas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big.l.a · 09-01-2002, 12:45 AM

Met another board member today Kenny Knight (chevyman 68
C/10 ). He welcomed me Into his home Feed meet and make feel
Welcome. If I had the knowlege he knows about paint and Body work I would be a Cazillionair

. and to boot he gave me a pair of Bucket with matching concole.........Jesus God Is Goooood.

. If you get the chance drive down to Gilmer, TX. you will be amazed @ the thing
he has.........

Longhorn Man · 09-01-2002, 01:01 AM

meeting members is pretty cool. I always look forward to meeting another.

hjalbert · 09-01-2002, 02:29 AM

if i were you i wouldnt tell anyone that sonmeone gave you a set of buckets and console, they might think you had performed sexual favors or something JK, great for you!

chevyman 68 C/10 · 09-01-2002, 06:11 AM

WE had a great day! big.l.a is a heck of a guy, we couldn,'t keep him from rolling under my brothers truck we were trying to lower and getting knee deep in all the work.
Friends are hard to come by but,man,when you find them that love 67-72 trucks as much as i do, it can only be a great deal.
I very much look forward to talking to you in the future.
I have met 5 board members and have found 5 new friends without eception.
-----------------------------------------------------------------------------------
A word of caution you have to watch big.l.a, he is a washer pitching guru---------- what a nice guy!

big.l.a · 09-01-2002, 05:00 PM

Chevyman 68 C10 let me know how your brother's drop job
ended. I sure would have like to seen how the spring went In.....

chevyman 68 C/10 · 09-01-2002, 10:14 PM

big.l.a
we had to trim a little out of the brace, by the shackle.Everything worked great, looks good.Put the spindles on it today and rear sway bar.Drives real good.
I even had time to pull the rear sway bar off of the T/A to go on my 69.
Thanks a lot for the help yesterday.A cutting torch helped to speed the job up.

Suicide-D · 09-01-2002, 11:19 PM

You aren't too far from my mother's house in Gladewater...do you have any more bucket seats? I'm looking for a set to go in my 68 I have the original bracket and console, just need the seats. I could always use more friends with similar interests....everyone I have met from this board has been great...plus it would make my mother happy if I would drive up there for a change.

bgbchevy · 09-01-2002, 11:34 PM

Wow all these town are not but 15 miles from where Im sitting......heheh

chevyman 68 C/10 · 09-02-2002, 02:56 PM

Sorry Dirt Dobber i only had one pair but I will keep an eye out for another and Gladewater is where i buy all my adult beverages since it is a dry county here.
bgbchevy we need to get together sometime and chew the fat, we are a stones throw away. Give me a shout and we can pitch a game of washers some time.
I think I saw someone from Winona once.
Anyone else in this area or maybe this is a whole new post.

Longhorn Man · 09-02-2002, 04:59 PM

Quote:

Originally posted by chevyman 68 C/10
...we need to get together sometime and chew the fat, we are a stones throw away. Give me a shout and we can pitch a game of washers some time...

Hmmm, You can only talk like THAT in tx...

Gene · 09-02-2002, 05:51 PM

I agree, people in texas are way cool. Me and dad got caught up in a hell of a storm at the last Nascar race and ran out of beer. Hell, we could'nt force that guy to let us pay him for all the beer we bummed off of him! By the way, Okies are pretty cool too!

chevyman 68 C/10 · 09-02-2002, 11:19 PM

Okies are cool every woman Iv'e married has been a Okie -only two

bgbchevy · 09-03-2002, 01:36 AM

Chevyman check your PM

09-01-2002, 12:45 AM	#1
big.l.a Registered User Join Date: Jan 2002 Location: Allen, TX. USA Posts: 210	The Nicest People you meet In Texas Met another board member today Kenny Knight (chevyman 68 C/10 ). He welcomed me Into his home Feed meet and make feel Welcome. If I had the knowlege he knows about paint and Body work I would be a Cazillionair . and to boot he gave me a pair of Bucket with matching concole.........Jesus God Is Goooood. . If you get the chance drive down to Gilmer, TX. you will be amazed @ the thing he has......... __________________ 71 C10 LWB With Edelbrock 7101& 1406 Carb Accel HEI Blue Print Accel 8.8 Wires Soon to have possi & 186 Camel hump heads Dropped 2-1/2F&4R Dynomax Headers Duals Flowtech Aftburners Tonneau Cover Frm 89 F150 79 Monte C

09-01-2002, 02:29 AM	#3
hjalbert cracker Join Date: Sep 2001 Location: Wilmington, NC Posts: 1,021	if i were you i wouldnt tell anyone that sonmeone gave you a set of buckets and console, they might think you had performed sexual favors or something JK, great for you! __________________ FOUNDING MEMBER OF THE DRUM BRAKE CLUB Harry John Albert III located in Phoenix, AZ 1972 GMC JIMMY, 1969 lwb Chevy Frame, 1999 bmw k1200 ltc 1992 Kawasaki concours 1991 bmw k75 1973 cortez motorhome

09-01-2002, 06:11 AM	#4
chevyman 68 C/10 Registered User Join Date: Feb 2002 Location: Gilmer, Texas USA Posts: 313	WE had a great day! big.l.a is a heck of a guy, we couldn,'t keep him from rolling under my brothers truck we were trying to lower and getting knee deep in all the work. Friends are hard to come by but,man,when you find them that love 67-72 trucks as much as i do, it can only be a great deal. I very much look forward to talking to you in the future. I have met 5 board members and have found 5 new friends without eception. ----------------------------------------------------------------------------------- A word of caution you have to watch big.l.a, he is a washer pitching guru---------- what a nice guy! __________________ 69 Chevy short fleet side soon to have LT1 and 4L60E pb. ps cruise and air. 68 Chevy short fleet side 400 sb 5 inch chop top pb. ps. pw. 350 auto and shaved handles 68 anniversary no engine long wheel base 400 auto FOR SALE 68 Chevy fleet side long wheel base complete parts truck.

09-01-2002, 05:00 PM	#5
big.l.a Registered User Join Date: Jan 2002 Location: Allen, TX. USA Posts: 210	My Friend Chevyman 68 C10 let me know how your brother's drop job ended. I sure would have like to seen how the spring went In..... __________________ 71 C10 LWB With Edelbrock 7101& 1406 Carb Accel HEI Blue Print Accel 8.8 Wires Soon to have possi & 186 Camel hump heads Dropped 2-1/2F&4R Dynomax Headers Duals Flowtech Aftburners Tonneau Cover Frm 89 F150 79 Monte C

09-01-2002, 10:14 PM	#6
chevyman 68 C/10 Registered User Join Date: Feb 2002 Location: Gilmer, Texas USA Posts: 313	big.l.a we had to trim a little out of the brace, by the shackle.Everything worked great, looks good.Put the spindles on it today and rear sway bar.Drives real good. I even had time to pull the rear sway bar off of the T/A to go on my 69. Thanks a lot for the help yesterday.A cutting torch helped to speed the job up. __________________ 69 Chevy short fleet side soon to have LT1 and 4L60E pb. ps cruise and air. 68 Chevy short fleet side 400 sb 5 inch chop top pb. ps. pw. 350 auto and shaved handles 68 anniversary no engine long wheel base 400 auto FOR SALE 68 Chevy fleet side long wheel base complete parts truck.

09-01-2002, 01:01 AM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	meeting members is pretty cool. I always look forward to meeting another.

09-01-2002, 11:19 PM	#7
Suicide-D Registered User Join Date: Jan 2001 Location: Katy, TX...but the love of my life resides in Dublin,OH. Posts: 1,408	chevyman 68 C/10 You aren't too far from my mother's house in Gladewater...do you have any more bucket seats? I'm looking for a set to go in my 68 I have the original bracket and console, just need the seats. I could always use more friends with similar interests....everyone I have met from this board has been great...plus it would make my mother happy if I would drive up there for a change.

09-01-2002, 11:34 PM	#8
bgbchevy Registered User Join Date: Aug 2001 Location: College Station, Texas Posts: 486	Wow all these town are not but 15 miles from where Im sitting......heheh __________________ 1972 Chevrolet C/20 LWB, BB 402, Tach, Bedside Toolbox, Posi, Factory AC, Factory AM/FM, cruise, Dana 60

09-02-2002, 02:56 PM	#9
chevyman 68 C/10 Registered User Join Date: Feb 2002 Location: Gilmer, Texas USA Posts: 313	Sorry Dirt Dobber i only had one pair but I will keep an eye out for another and Gladewater is where i buy all my adult beverages since it is a dry county here. bgbchevy we need to get together sometime and chew the fat, we are a stones throw away. Give me a shout and we can pitch a game of washers some time. I think I saw someone from Winona once. Anyone else in this area or maybe this is a whole new post. __________________ 69 Chevy short fleet side soon to have LT1 and 4L60E pb. ps cruise and air. 68 Chevy short fleet side 400 sb 5 inch chop top pb. ps. pw. 350 auto and shaved handles 68 anniversary no engine long wheel base 400 auto FOR SALE 68 Chevy fleet side long wheel base complete parts truck.

09-02-2002, 05:51 PM	#11
Gene Registered User Join Date: Aug 2002 Location: Muskogee, Oklahoma Posts: 2,914	I agree, people in texas are way cool. Me and dad got caught up in a hell of a storm at the last Nascar race and ran out of beer. Hell, we could'nt force that guy to let us pay him for all the beer we bummed off of him! By the way, Okies are pretty cool too! __________________ 1971 SWB 4X4 Build BOARD MEMBER #5448 BOOMER SOONER!!!!

09-02-2002, 11:19 PM	#12
chevyman 68 C/10 Registered User Join Date: Feb 2002 Location: Gilmer, Texas USA Posts: 313	Okies are cool every woman Iv'e married has been a Okie -only two __________________ 69 Chevy short fleet side soon to have LT1 and 4L60E pb. ps cruise and air. 68 Chevy short fleet side 400 sb 5 inch chop top pb. ps. pw. 350 auto and shaved handles 68 anniversary no engine long wheel base 400 auto FOR SALE 68 Chevy fleet side long wheel base complete parts truck.

09-03-2002, 01:36 AM	#13
bgbchevy Registered User Join Date: Aug 2001 Location: College Station, Texas Posts: 486	Chevyman check your PM __________________ 1972 Chevrolet C/20 LWB, BB 402, Tach, Bedside Toolbox, Posi, Factory AC, Factory AM/FM, cruise, Dana 60

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.