|
|
|
03-16-2007, 10:44 PM
|
#1 |
|
Registered User
Join Date: Jan 2007
Location: victoria tx
Posts: 70
|
decisions....
so i have been looking for a cab or a bed and havent had much luck here lately. so i have decided to order a few more things for my bag setup. the thing is i dont know what to order. heres a list of what i have for my 67.
2 re7 bags 50 ft of 1/2' airline rear brackets kp stepnotch 12 gallon tank (i went way overboard on that one) switchbox kp dual needle guage 2" blocks i know i need fittings and valves.im saving those for last. im doing a front back setup. i need compressors but dont know what to get. for the front i have a 73-87 crossmember. what else should i get and what brands? also what type of fittings? compression or push to connect? Last edited by cruisinlow67; 03-17-2007 at 07:47 AM. |
|
|
|
03-16-2007, 11:36 PM
|
#2 |
|
Commander Taco Bello
Join Date: Sep 2006
Location: Des Moines, Iowa
Posts: 2,232
|
Re: decisions....
here's a good thread for ya.
http://www.67-72chevytrucks.com/vboa...d.php?t=231525 assuming you have a coil truck, there's not need for brackets in the rear. just mount the bags in place of the old coils. also, go with 3/8 line and valves. 1/2 will dump way to fast. literally a 1 second slam on the ground. i would also suggest not going cheap on the valves. get 8, not just 4. you don't want to tie your fronts together and you backs together. if you do, you will increase your body roll. |
|
|
|
|
03-17-2007, 07:49 AM
|
#3 |
|
Registered User
Join Date: Jan 2007
Location: victoria tx
Posts: 70
|
Re: decisions....
that helped a little but whats everyones opinion? who sells tubular trailing arms besides cpp?
|
|
|
|
 |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
