Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
03-24-2007, 11:07 AM | #1 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Mirror mirror on the wall......
I'm thinking about changing the mirrors on my truck (below) as the mounting arms for the existing (original) ones are now rusty, the mirror is cracked in one and both are losing the silvering off the back. Frankly they aren't the prettiest mirrors I've ever seen and now the ugly roll bar has gone of the back I'd like something cleaner to lok at. Can you post up what you're using so I can have a look? As I can't afford a respray at the moment I'm thinking of painting some small button head stainless bolts to match the paintwork and bolting them through the original holes with a dab of sealant to seal them up until I can weld the holes up and then afford to have them repainted.
I'm thinking about a set of these that clamp to the quarter window frame rather than having to drill the doors again, anyone used this kind of mirror and are they any good? My big problem is driving on the left (right!) side of the road the passenger side mirror is kinda important for overtaking etc so it needs to give a decent view.
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
03-24-2007, 01:43 PM | #2 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: Mirror mirror on the wall......
Driving on the wrong side is a pain! Steering from the wrong is even worse...LOL! I hate the big mirrors due to door damage but they are much better to see out of. You can find the little pastic buttons in the hardware store that you can insert into the holes with sealer (don't use silicone sealer due to paint contamination) but paint them before you insert them. They sit almost flush. I like the stock round or custom sport mirrors but they are somewhat difficult to see out of. As good or better than the peeps...just too small, difficult to adjust and damage the paint on the door. You will still have to drill holes for the stockers but they will be in the correct spot at least. Just some thoughts for you.
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
03-24-2007, 04:21 PM | #3 |
Registered User
Join Date: Feb 2004
Location: Tacoma WA
Posts: 1,365
|
Re: Mirror mirror on the wall......
Lippy - you got more guts than most of us. Wrong side of the road - BIG old truck in a foreign country(heck even a different continent).
Live life to it's fullest - Bob
__________________
67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow |
03-24-2007, 04:26 PM | #4 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: Mirror mirror on the wall......
How do you dirve that thing down those country roads with the big hedgerows on both sides along the North Devon Coast? I had trouble getting a little rental car down there...scared the "snake and kidney pie" outta me!
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
03-25-2007, 01:11 AM | #5 |
Too many projects
Join Date: Mar 2004
Location: Fargo, ND land of the flat hills
Posts: 1,147
|
Re: Mirror mirror on the wall......
The small round mirrors seem to be worthless on the passenger side IMHO.
__________________
Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" |
03-25-2007, 08:53 AM | #7 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Mirror mirror on the wall......
Good mirrors aren`t the prettiest.Pretty mirrors are worthless.How about a panoramic interior mirror?
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
03-26-2007, 06:32 AM | #8 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Re: Mirror mirror on the wall......
So what do stock mirrors look like, pics anyone? I wonder if I could make new mounts for my existing mirrors from stainless?
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
03-26-2007, 07:57 AM | #9 |
1FINE69
Join Date: Aug 2003
Location: Detroit, Michigan
Posts: 239
|
Re: Mirror mirror on the wall......
Those little peep mirrors are useless on the passenger side for regular driving and only offer a minor help when backing into parking spaces. At highway speeds the vibrate too much to see anything but a blur of lights. They do look good but I would only put it on if its necessary for inspections or insurance/registration purposes. Just my.02 worth.
__________________
Had a 69 swb fleetside 350zz3 w 400turbo trans oak lined bed with rhino coated sides red exterior. SOLD |
03-26-2007, 09:38 AM | #10 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Mirror mirror on the wall......
Here`s your original mirror.Also came in chrome:
Then,there were Jr.West Coasts in paint or chrome:
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 03-26-2007 at 09:46 AM. |
03-26-2007, 01:17 PM | #11 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Re: Mirror mirror on the wall......
So I'm assuming mine are aftermarket or dealer fit mirrors?
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
03-26-2007, 05:43 PM | #12 |
Special Order
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Mirror mirror on the wall......
Yes,there were factory below eyeline mirrors,later,simular to yours.But those little "L" brackets reveal them as aftermarket.There are the sport mirrors from71/72 that are very sharp on these trucks.Not the best mirror,styled like car mirrors from this era. Both truck pictures are borrowed from members.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
03-28-2007, 07:29 AM | #13 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Re: Mirror mirror on the wall......
I've seen these that look mighty similar to the sport mirrors
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
02-21-2013, 07:08 AM | #14 |
Registered User
Join Date: Feb 2013
Location: Marysville WA
Posts: 10
|
Re: Mirror mirror on the wall......
Phil, who makes those mirrors? They look sharp. I have a 71 that has the stock reproduction mirrors on and I cannot see out the passenger side one at all. I don't wanna move the mirror because the holes will still be there. Those look like they would adjust though enough and cover up the holes.
Posted via Mobile Device |
02-21-2013, 09:07 AM | #15 | |
Registered User
Join Date: Oct 2012
Location: Rose Hill Kansas
Posts: 1,351
|
Re: Mirror mirror on the wall......
Quote:
Posted via Mobile Device
__________________
1970 C10 Short Stepper with 71/72 front clip. |
|
02-21-2013, 09:43 AM | #16 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Re: Mirror mirror on the wall......
Blimey, thread from the dead, this was posted six years ago! Anyway, you can still get them but not sure if they'll export to the USA
http://www.motoringclassics.co.uk/te...-mirror/p20433
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
02-21-2013, 10:55 AM | #17 |
The Older Generation
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,772
|
Re: Mirror mirror on the wall......
-
So Phil, since this thread is back up what did you end up doing with your mirrors? Or are you a procrastinator like me.....j/k LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
02-21-2013, 12:46 PM | #18 |
English Chevy Owner
Join Date: May 2002
Location: Shropshire, UK/ Lot, France
Posts: 1,848
|
Re: Mirror mirror on the wall......
I'm halfway through repainting the original arms but a house move, kids and generally life has intervened in the meantime. Now I have a decent sized garage with power (as of last weekend!) I hope to get back working on the truck this summer.
__________________
Phil '67 C10 long fleet. 350/TH350, 4 bbl Carter, K&N, Dual exhaust, loads of stuff coming soon 2001 S10 Blazer Daily Driver, bone stock 4 door 4x4 with manual transmission |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|