Project trucks in texas for sale

[STP67-72]

I have a 68 swb stepside body for sale. It was made out of 2 trucks and has 5 lug disc and 5 lug 373 rearend. The front end parts were new when it was put together by previous owner. It was one of three trucks i bought from the man. Has kick panel rust, needs 2 rockers and drivers door bottom a little weak. but repairable. Front clip is ok. Core support good, front fenders are useable and hood is ok. Grille is straight. but has a couple holes drilled in it for a grille guard. I have had several like this. I think it was a dealer add on. Stepside bed is nice and has no spare cutout on fender. Tailgate is nice. Setup for v-8 and automatic. I think cab is rust free all the way down to the kick panels. No glass in truck. Due to previous owners wife, with red a## ???? Comes with 2 xtra doors for parts. I have rear window. Non air cab and original radio hole. Uncut. I have pics. i will post as soon as i can.
I am asking $1400.00 obo

I also have a 1970 swb rolling project that has had the frame cut down from previous owner. I have a original frame that i will work with if interested. It is a nice original paint east texas truck that i have had stashed for about 4 years. I changed the rockers and cab corners and is 95% finished. Fleetside bed is rough. Front clip is ok. I want $1800.00 complete rig. I will sale cab and doors for $1200.00 I will have pics. up soon.
Both have clear texas titles. I will get more info. later.

[STP67-72]

Here are a couple of pictures from this week end. I will get some better pics of the projects for sale. The blue 68 step side is one I have for sale. The white 67 is suppose to be sold to a guy I work with. I thought I had pics of the 70 swb project, not on this camera I pulled these pics off of. I will take better pics. There are pics of my other projects. Cleaned them up this week end and took pics while they were out. The medium red 69 is the one I am almost finished with that I did a frame up on. The viper red 70 model project is the truck I bought from one of my customers, that got burnt out on it and it will be the next one I am going to start on. There is a picture of my 79 super cab for all you ford guys

www.swapmeettexas.com

[67 cst swb]

I'm interested...
close up pic's of rusty area's, interior, and bed floor please... How far is Port Neches from San Antonio approximately?

[72CSTC5]

S.A is about 5 hrs from Port Neches. Say thanks Steve for interrupting!! I sent you a pm tonight.

[72CSTC5]

P.S. show off on the trux!!

[STP67-72]

I did not want everydody to think that a was just a old rusty parts guy (dream builder) I had them all out for family day. Carlos i know you really like the F--d. I want tell anybody. I will price bedsides for you. Better price if i order 2 sets.
Later

[STP67-72]

Here are some more pics. of the blue 68. I will try to post the 70 project also.

[STP67-72]

more pics.

[STP67-72]

pics.

[LUV2XCLR8]

Wow, nice stash, I have a problem with the 1st few pic's, someone snuck
a F@#$ in there on ya, ya might want to tell them to move it next time

[Hart_Rod]

I'll take the red one off of your hands if you don't want it, .

[jorgensensc]

If you decide to part it will you let me know? I have a stepper that needs a few of these parts. ie tailights w/ brackets, automatic steering column, 5 lug coil rear (mine is 6 lug 3.73) rear bumper brackets.. etc. I could make a daytrip to san antonio. Or maybe just a good short fleet bed and save me the trouble of trying to fix the stepside up!
SHawn

[STP67-72]

I posted some of these pics. for a guy to look at. The red fleet and the bedside to go with it. There are 3 driver quality tailgates that are standing up against the beds. 67-68 grille for sale.

Hart Rod
I think you are talking about the red bed??
I also enjoy your pics. and projects.

Jorg.
I should have everything you need for stepside. I might have xtra 5 lug. The only way i would have rear bumper brackets are new.
I am in Beaumont area. East of Houston. The other guy was asking about San Antonio
I will part the yellow 70 out if i sell the cab first. I think the gray bed is sold. So i will put a stepside bed on it.
The blue 68 i want to sell complete. Thanks Guys.

[Hart_Rod]

Originally Posted by STP67-72

Hart Rod
I think you are talking about the red bed??
I also enjoy your pics. and projects.

No, I was talking about the red 69 SWB.

[72CSTC5]

Hey Steve if the red bed does not sell let me know. You do not have a short fleet bedside laying around for the left side do you?

[Dizzy]

Is there a good SWB fleetside bed still available? I have a nice stepside bed off a 68 with the spare tire rack for sale or trade.

[mbgmike]

we need a passenger swb bedside if you have any left

[camaro__thunder]

Hey man I am around Houston and would like to get 2 bedsides but maybe just a good driver side ? Price ? Thanks

[STP67-72]

I posted the pics. of red bed and bedsides for a guy to look at. I think it is sold. The left side is junk.
I just bought all 3 bedsides about a month ago because i need all three of them to complete trucks and beds. I need pass. side for 72 project and drivers side for 67 fleet, one for red bed.
The yellow truck with gray bed is the only other bed that is for sale. I have had about 5 calls this week on fleetside beds and none were from this post. Local guys from swapmeet couple weeks ago.
It looks like i have 2-3 sets of new goodmark bedsides to order. I can price these for some of you guys if anybody wants new stuff.

At this point all i have for sale is the 2 trucks and tailgates. And the other misc. items. I will sell cab off of 70. The 68 is complete roller only.
Let me know if i can help.

[mbgmike]

We sell the new bed sides but were looking for a customer who wants a nice right side oem one

Thanks

[N2GMTrux]

In post #11 there is a blue short bed fleetside with upper and lower chrome trim and tailgate. HOW MUCH for complete bed!!!!

[Mt Man Chad]

Do you by chance have a extra 67 68 hood latch and gravel guard you would sell?

The part that goes from the bottom of the grill to the core support?

[ChevyDude]

I am interested in the blue 68' stepper. Can you send pics?
Gatorhydeofdenver@gmail.com

[STP67-72]

MT MAN
I will look for hood latch assembly and splash guard for 67-68. I think i have one where some of my trucks are stashed. It is about 20 minutes away. I will look the next time i go that way. I still have some stuff in my barn where the truck pics. were taken.

Chevy dude
What pics. do you need. I will take some better pics. of floor board and inside bed when it stops raining. I will work on it asap.

[72CSTC5]

I knew it wouldn't last long. I was surprised you still had it after Trader's Village show. If I had more room I would have had all 3 you were selling.