|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
04-05-2007, 11:53 PM
|
#1 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
any interested in...........
have some 67-68 hoods, some 69-72 hoods and front bed panels for metal floor beds. They are piled up so if there is any interest I can pull them out and take pix.
I know there is at least one perfect of each mentioned above and the rest are in good shape with minor dents, ect. 69/71 SWB bed rough shape, metal floor straight but pitted with rust, front bed panel good shape, passenger side rust and damage, drivers side workable but not cherry, tailgate, it's there and closes, some chrome $100.........pick up only 3 front suspension crossmembers, 2 are 67-68 one is 69/71 $40 apiece plus.....shipping would be probably around 60-70 bucks 4speed with transfer case 3 speed with transfer case 4 M/T 15x8 classics 6 lugs one with very minor curb scape will polish out $250 plus shipping front and rear 71/72 1/2 4x4 axles 3:73 ratio, rear end housing rusted and no good but axles and gears are, front housing sitting outside, surface rust only complete with hubs and steering linkage both non-posi $250 no shipping 68 eaton coil 3/4 rear non-posi 4:56 ratio P/O said it has new wheel cyclinders and good drums, One of the trailing arm perches has the holes elongated by loose u bolts, I didn't take it apart $100 no shipping 68 1/2 4x4 burb........basically just the rolling frame, good shape no rust except surface with open knuckle front end, no idea of gear ratios ,with out adapted p/s box, has stripped and rusted burb body on it with good roof, uncut non a/c dash, good spare tire well, good cowl panel (the one welded to body) would like to make some room........but no hurry will email pix to interested people, if serious intent, don't have enough energy or time to move all the stuff to take pix for grins! Thanks, Steve Last edited by qksilver; 04-06-2007 at 08:05 AM. |
|
|
|
04-06-2007, 12:14 AM
|
#2 |
|
'Burban Legend
 
Join Date: Apr 2005
Location: Mingo Junction OH
Posts: 918
|
Re: any interested in...........
Steve,
PM sent on t-cases. Thanks, Mike
__________________
'67 Chevy Iron City Beer Truck (9ft step) '67 Chevy Panel Truck 467 '68 Short Fleet 305v6 '68 McLaren Ramp Truck '68/'68/'70/'71 Burbs 292/366/402/454 '69 C-30 dump '71 C-50 dump and church bus '71 4x4 454 '72 Blazer (w/pop-up camper) $15 x-hooks '66 Chevy II 194/Weber '68 El Camino" 305v6 '69 Skylark 455 Buick '70 Chevelle 427 '71 Cutlass W-31 '71 GTO 400 2x2 "The 51" Chopped '51 Chevy (409) my first car OK Toad, we'll take 'em all... John Milner |
|
|
|
|
04-06-2007, 12:38 AM
|
#3 |
|
Junior Member
Join Date: Apr 2006
Location: Rogers, AR
Posts: 298
|
Re: any interested in...........
Any Cowl Inductions (cheap)? 69-72?
|
|
|
|
|
04-06-2007, 07:21 AM
|
#4 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
brand new one and no it wouldn't be cheap
|
|
|
|
|
04-06-2007, 10:56 PM
|
#5 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
Ttt
|
|
|
|
|
04-08-2007, 09:35 AM
|
#6 |
|
Senior Member
Join Date: Jan 2001
Location: Virginia Beach, Va, USA
Posts: 1,680
|
Re: any interested in...........
Looking for a 67-68 hood with no rust. How far are you from Virginia Beach? Kerry
__________________
1967 C10 Got it back after three years Boy I sure missed Peppy 1969 Chevelle 1990 IROC Z Convertible 2002 Silverado LT |
|
|
|
|
04-08-2007, 08:39 PM
|
#7 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
About 4 hours, done it many a time. I am west of fort bragg.....28387
|
|
|
|
|
04-08-2007, 09:45 PM
|
#8 |
|
Senior Member
Join Date: Dec 2002
Location: Portland, Oregon
Posts: 901
|
Re: any interested in...........
what would you want (incl shipping) for a front bed panel ? ( wide box, steel floor)..............Jim
__________________
'71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal). |
|
|
|
|
04-09-2007, 08:27 AM
|
#9 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
I will get some pix and weight it.Give me a zip...........
Thanks, Steve |
|
|
|
|
04-09-2007, 04:58 PM
|
#10 |
|
Senior Member
Join Date: Dec 2002
Location: Portland, Oregon
Posts: 901
|
Re: any interested in...........
Portland OR... 97233..............Jim
__________________
'71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal). |
|
|
|
|
04-09-2007, 06:46 PM
|
#11 |
|
Future TOTM Winner
Join Date: Aug 2006
Location: Bulverde, TX
Posts: 2,692
|
Re: any interested in...........
I am interested in a hood (fenders and grill also while we are at it) for a 71-72. I would prefer one in great shape if possible, but I would need shipping to Texas.
__________________
72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com |
|
|
|
|
04-09-2007, 07:59 PM
|
#12 |
|
Senior Member
Join Date: Nov 2000
Location: WI,USA
Posts: 495
|
Re: any interested in...........
Send Pics of your best front panel & shipping quote to 53012.Thanks
__________________
69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc. |
|
|
|
|
04-09-2007, 08:00 PM
|
#13 |
|
Senior Member
Join Date: Nov 2000
Location: WI,USA
Posts: 495
|
Re: any interested in...........
Send Pics of your best front panel & shipping quote to 53012.Also,any inner rear wheel tubs? Thanks
__________________
69 Lwb C-10 402/700R4 70 Lwb C-10 250/3pd Wisc. |
|
|
|
|
04-09-2007, 09:44 PM
|
#14 |
|
Registered User
Join Date: Jun 2006
Location: concord, north carolina
Posts: 50
|
Re: any interested in...........
I d be interested in a front panel also if you got a good one left with no rust my inlaws are from vass, nc so id be glad to pick up next time we come that way
|
|
|
|
|
04-09-2007, 09:55 PM
|
#15 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
No problem, start a new job tomorrow and won't know my schedule until then
Steve |
|
|
|
|
04-09-2007, 11:54 PM
|
#16 |
|
Registered User
Join Date: Mar 2007
Location: millstadt il
Posts: 16
|
Re: any interested in...........
do you have any rear leaf spring plates
thanks shawn |
|
|
|
|
04-10-2007, 11:50 AM
|
#17 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
I do but I would have to find them
can you send me a pix of the ones you want? I have a couple of boxes of them and not sure which is 4x4 or 2 wheel or if 1/2 and 3/4 are different. SCJKOVACH@AOL.COM Thanks, Steve |
|
|
|
|
04-10-2007, 12:56 PM
|
#18 |
|
A WORK IN PROGRESS
Join Date: Apr 2004
Location: toccoa, georgia
Posts: 205
|
Re: any interested in...........
interested in 67-68 hood and grille.
|
|
|
|
|
04-10-2007, 10:19 PM
|
#19 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
no grills for sale right now.
|
|
|
|
|
04-10-2007, 11:05 PM
|
#20 |
|
Senior Member
Join Date: Dec 2002
Location: Portland, Oregon
Posts: 901
|
Re: any interested in...........
waiting for price including shipping for front bed panel ( as requested in previous msg..) zip code 97233... Portland,Oregon....
__________________
'71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal). |
|
|
|
|
04-11-2007, 10:59 AM
|
#21 |
|
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: any interested in...........
I haven't been able to get to my shop with starting my new job. Will as soon as possible and let everybody know.
Thanks, Steve |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
