sanden a/c compressor fittings for RICHARD - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*rage'nrat638* · 04-08-2007, 11:12 AM

well heres the pictures sir..
my engines out of the truck again. but i think it makes these pictures better

i changed the heater control valve to.

*rage'nrat638* · 04-08-2007, 11:14 AM

and some more

i had to take one of my tranny..it was crying

*rage'nrat638* · 04-08-2007, 11:17 AM

it needs it's mate

the new and improved vortec headed 350 coming up this next week end. i have a lot of work to do..

mostly on the carb

kbs71 · 04-08-2007, 11:57 AM

MMMMMMMM.....nice, chevy engine orange.
Are these the heads in your post for installing screw in rocker studs? Or are they some new kind of evil ragin rat specials?

*rage'nrat638* · 04-08-2007, 12:19 PM

yes these are the ones that i installed the screw in studs in

they were going on the 400 but changed my mind and doing the 350 power boost instead

Richard H. · 04-08-2007, 01:34 PM

So those are stock hoses? I have a manual vacuum pump to test the diaphragms with but at this point I'll probably go with new ones.
My PC took a dump and if a brown truck shows tomorrow I will post a few pics along with a good? story. Every time I walk into my shop my 383 says " Now dad?"
RH

*rage'nrat638* · 04-08-2007, 01:41 PM

nope there not stock hoses. i got lucky when i bought the pump used, the hoses were already on the pump..
and the brackets. that saved me a ton of time..

Richard H. · 04-08-2007, 01:59 PM

Quote:

Originally Posted by rage'nrat638

nope there not stock hoses. i got lucky when i bought the pump used, the hoses were already on the pump..
and the brackets. that saved me a ton of time..

Well that's cheatin ! LOL , I will start a thread about it and try to get an answer. Thank you for the pictures that does show I don't need the canister on top of the compressor. RH

kbs71 · 04-08-2007, 01:33 PM

All I can say is those look SWWWWEEEETTTTTTTTTTTT ! ! !
Sorry wasn't rying to hijack your thread....

04-08-2007, 11:12 AM	#1
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	sanden a/c compressor fittings for RICHARD well heres the pictures sir.. my engines out of the truck again. but i think it makes these pictures better i changed the heater control valve to. Last edited by rage'nrat638; 07-12-2007 at 06:54 AM.

04-08-2007, 11:14 AM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: sanden a/c compressor fittings for RICHARD and some more i had to take one of my tranny..it was crying Last edited by rage'nrat638; 07-12-2007 at 06:54 AM.

04-08-2007, 11:17 AM	#3
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: sanden a/c compressor fittings for RICHARD it needs it's mate the new and improved vortec headed 350 coming up this next week end. i have a lot of work to do.. mostly on the carb Last edited by rage'nrat638; 07-12-2007 at 06:54 AM.

04-08-2007, 11:57 AM	#4
kbs71 71 rustless in texas Join Date: Aug 2004 Location: Houston, TX Posts: 257	Re: sanden a/c compressor fittings for RICHARD MMMMMMMM.....nice, chevy engine orange. Are these the heads in your post for installing screw in rocker studs? Or are they some new kind of evil ragin rat specials? __________________ "The secret to creativity is knowing how to hide your sources." "No one really listens to anyone else, and if you try it for a while you'll see why" 71 C-10 LWB presently in a perpetual state of disassembly '96 Toyota (my work car) '04 Mustang Convertable (wife's car & other money pit) Latest aquesition and why my trucks still in the garage covered with junk.. 2010 Aqua Blue metallic 6 speed Manual LS3 2SS/RS Camaro (I want one of these in my truck FAQ here VENDORS here SUPPORT THE BOARD here My second favorite SITE

04-08-2007, 12:19 PM	#5
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: sanden a/c compressor fittings for RICHARD yes these are the ones that i installed the screw in studs in they were going on the 400 but changed my mind and doing the 350 power boost instead Last edited by rage'nrat638; 07-12-2007 at 06:54 AM.

04-08-2007, 01:34 PM	#6
Richard H. Spanked once Join Date: Oct 2006 Location: Intheshop, Indiana Posts: 969	Re: sanden a/c compressor fittings for RICHARD So those are stock hoses? I have a manual vacuum pump to test the diaphragms with but at this point I'll probably go with new ones. My PC took a dump and if a brown truck shows tomorrow I will post a few pics along with a good? story. Every time I walk into my shop my 383 says " Now dad?" RH

04-08-2007, 01:41 PM	#7
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: sanden a/c compressor fittings for RICHARD nope there not stock hoses. i got lucky when i bought the pump used, the hoses were already on the pump.. and the brackets. that saved me a ton of time..

04-08-2007, 01:33 PM	#9
kbs71 71 rustless in texas Join Date: Aug 2004 Location: Houston, TX Posts: 257	Re: sanden a/c compressor fittings for RICHARD All I can say is those look SWWWWEEEETTTTTTTTTTTT ! ! ! Sorry wasn't rying to hijack your thread.... __________________ "The secret to creativity is knowing how to hide your sources." "No one really listens to anyone else, and if you try it for a while you'll see why" 71 C-10 LWB presently in a perpetual state of disassembly '96 Toyota (my work car) '04 Mustang Convertable (wife's car & other money pit) Latest aquesition and why my trucks still in the garage covered with junk.. 2010 Aqua Blue metallic 6 speed Manual LS3 2SS/RS Camaro (I want one of these in my truck FAQ here VENDORS here SUPPORT THE BOARD here My second favorite SITE

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.