Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-20-2007, 01:57 AM | #1 |
100% gearhead
Join Date: Apr 2007
Location: Boise, Idaho
Posts: 313
|
Broken Control Arm, HELP!!! Need new ones!
Hey guys! I'm running a pair of 2" drop lower control arms for '63-'71 in my '62 from a company called SoLow that seems to no longer exist. I broke one of these and was hoping someone could help me find some suitable replacements. I don't have nearly the cash to convert to discs, so drop spindles are out of the question. Appreciate any help!
|
04-20-2007, 02:56 AM | #2 |
Registered User
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,893
|
Re: Broken Control Arm, HELP!!! Need new ones!
im no help with it but goodluck with fixing it and heres a bump for you
__________________
-steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME |
04-20-2007, 09:29 AM | #3 |
Registered User
Join Date: Mar 2007
Location: Rohnert park, CA
Posts: 139
|
Re: Broken Control Arm, HELP!!! Need new ones!
I think DJM makes some at least they used to a couple of years ago
|
04-20-2007, 10:31 AM | #4 |
Saving 1 truck at a time!
Join Date: Aug 2001
Location: Kent, WA
Posts: 6,465
|
Re: Broken Control Arm, HELP!!! Need new ones!
If they are fabricated steel, which most of them are, just pull it and have a local shop weld it up. Post a picture of it if you can.
__________________
'68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary) |
04-20-2007, 10:36 AM | #5 | |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,373
|
Re: Broken Control Arm, HELP!!! Need new ones!
Quote:
And a picture would help everyone see what you got, maybe it was produced under another name.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
|
04-20-2007, 10:59 AM | #6 |
Registered User
Join Date: Dec 2006
Location: Edmonton, Alberta
Posts: 522
|
Re: Broken Control Arm, HELP!!! Need new ones!
how did you manage to break it?
|
04-20-2007, 11:31 AM | #7 |
Registered User
Join Date: May 2002
Location: Oakley, Ca. USA
Posts: 137
|
Re: Broken Control Arm, HELP!!! Need new ones!
Does it look something like this?
I guess my picture isn't showing up...
__________________
Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it! Last edited by vfrdude; 04-20-2007 at 11:34 AM. Reason: explain image not showing up |
04-20-2007, 11:41 AM | #8 |
Registered User
Join Date: May 2002
Location: Oakley, Ca. USA
Posts: 137
|
Re: Broken Control Arm, HELP!!! Need new ones!
I think the picture should work now.....
I bought these from Suspension Techniques...they may have been supplied by the same manufacturer. The left one broke, but I still have the right side...
__________________
Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it! |
04-20-2007, 02:52 PM | #9 |
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Broken Control Arm, HELP!!! Need new ones!
Seeing that, I don't think I'd want to run them at all.
|
04-20-2007, 03:00 PM | #10 |
Registered User
Join Date: May 2002
Location: Oakley, Ca. USA
Posts: 137
|
Re: Broken Control Arm, HELP!!! Need new ones!
It's weird, the right side doesn't show any signs of cracking or anything. The A-arms had been installed about 10-11 years.
I ended up going with stock A-arms, and dropped spindles.
__________________
Rudy Fierros '95 Honda VFR750F Used to have a '71 Chevy Stepside, Guards Red, Lowered 4" rear, 3" front, White Oak bed wood, 700R4 w/373 gears until some low life stole it! |
04-20-2007, 04:42 PM | #11 |
Questionable
Join Date: Mar 2005
Location: Atlanta
Posts: 13,373
|
Re: Broken Control Arm, HELP!!! Need new ones!
Sounds like you got your money's worth out of them - I'd buy new ones.
__________________
If I've got anything up for grabs, it'll be here: 7-hole gauge cluster for a 67-72 p/u FREE (link) I can't check the forum daily. If I don't reply to you within 24 hours, drop me a PM! I'm (hopefully) still alive and will reply faster to a PM. |
04-20-2007, 06:31 PM | #12 |
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,684
|
Re: Broken Control Arm, HELP!!! Need new ones!
WOW, that is some thin steel for that bushing to be in! That should be a good thick piece of DOM.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
04-20-2007, 10:33 PM | #13 |
Scrapper 1
Join Date: Jan 2007
Location: Riverside Calif
Posts: 1,649
|
Re: Broken Control Arm, HELP!!! Need new ones!
www.LMCTRUCK.com
carries the stock uper and lower A arm and not bad on price with ball joint installed for 100.00 |
04-21-2007, 02:54 AM | #14 |
Registered User
Join Date: Aug 2006
Location: Bakersfield,CA
Posts: 7,893
|
Re: Broken Control Arm, HELP!!! Need new ones!
i wouldnt run those arms either, stock ones are good for me for now
__________________
-steven Alte Seele S.S. "Allison" '72 C/10 LWB 350SB/TH350 - DD PITBULL IS NOT A CRIME |
04-21-2007, 02:37 PM | #15 |
100% gearhead
Join Date: Apr 2007
Location: Boise, Idaho
Posts: 313
|
Re: Broken Control Arm, HELP!!! Need new ones!
The arms in the truck were stock pieces that had been cut by the before mentioned company, and lowered two inches behind the ball joint. It must have cracked after an airline decided to seperate from the nitrogen tank, laying the truck flat on the pavement. It later broke pulling out of the shop. It was at the front bushing, exact same spot as that tubular arm from vfrdude. I dont own a camera or have the software to upload digital pics, so sorry I cant get pics. I think I will drop a set of stockers I have. I also ended up with a disc brake front end, so maybe drop spindles are on the way in the near future afterall! Thanks for all the response guys!
|
04-21-2007, 04:24 PM | #16 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,672
|
Re: Broken Control Arm, HELP!!! Need new ones!
I think this is the company that you're looking for. Not sure however because Charley's drop arms look different and are much sturdier. But I think he goes by SoLow. I know that Charley does really good work so I'm confused by this. Anyway, here ya go:
Charley's Drop Shop | (503) 667-2636 7731 Northeast 33rd Drive, Portland, OR, 97211
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
04-21-2007, 11:50 PM | #17 |
100% gearhead
Join Date: Apr 2007
Location: Boise, Idaho
Posts: 313
|
Re: Broken Control Arm, HELP!!! Need new ones!
Hey guys, I went ahead and built a new control arm for the old girl. She's back on the road cruisin' as good as new!
|
04-21-2007, 11:54 PM | #18 |
100% gearhead
Join Date: Apr 2007
Location: Boise, Idaho
Posts: 313
|
Re: Broken Control Arm, HELP!!! Need new ones!
Oh yeah, I guess I did have a pic.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|