Ingnition Switch / Door Locks - The 1947 - Present Chevrolet & GMC Truck Message Board Network

shadaway · 05-01-2007, 11:57 PM

Ok, so I've spent the last two days adjusting the valves in my new project.

New pushrods and about 5 hours. Started her up and man what a difference. Then I went to drive it out of the driveway, and it died. Tried to start and the battery is dead. Not surprised.'

Get the jumper cables and the burban, hook everything up, turn the ignition and snap, the key breaks off.

Ok, it was the only key. I know this was stupid of me but I've been trying several places and none had the right blank.

Any ideas? Can a locksmith make a key from the lock? I've checked LMC and they have the locks, and the ignition switch but not a set that's key'd alike. Me likes the one key setup. Anyone been down this road?

Thanks.

brak · 05-02-2007, 12:58 AM

I got a set from cheyenne pickup parts about 4 years ago that covered the Ignition switch, doors, and glove box.

Early classic has the same kit. P/N 05-LKSS99 $50

i know there are others out there but i can't remember

CG · 05-02-2007, 01:01 AM

Yes a locksmith can key that up for you.

brak · 05-03-2007, 01:42 AM

I didn't have the number at the time, but i would suggest GMC Pauls.

He has the complete kit including glove box lock:
P/N 522820 $39.95

Not to mention he's a site supporter, and highly reccomended.

RicksTrucks · 05-03-2007, 11:10 AM

I have bought a couple one-key sets on eBay, so they are out there.

**LockDoc** · 05-03-2007, 03:32 PM

-
Did you get the broken piece out of the switch? If so you can send me the two pieces and I can cut you two new keys and send them back to you for 5 bucks.

If interested PM me....

LockDoc

Olden Days · 05-03-2007, 04:58 PM

Quote:

Originally Posted by LockDoc

-
Did you get the broken piece out of the switch? If so you can send me the two pieces and I can cut you two new keys and send them back to you for 5 bucks.

If interested PM me....

LockDoc

now you cant beat a deal like that!! You better do it. If you cant get the key out, send him the whole cylinder

.

I wonder if you cant find original blanks because you are going to stores that just happen to cut keys instead of a real locksmith shop. Originals are still plentiful

jimmydean · 05-03-2007, 05:47 PM

I got the set from GMC Pauls and it was perfect for my '73, I'm sure it's the same for the 67-72. Always quality with that guy over there.

05-01-2007, 11:57 PM	#1
shadaway Full Blown Rookie Join Date: Mar 2007 Location: Antelope, CA Posts: 20	Ingnition Switch / Door Locks Ok, so I've spent the last two days adjusting the valves in my new project. New pushrods and about 5 hours. Started her up and man what a difference. Then I went to drive it out of the driveway, and it died. Tried to start and the battery is dead. Not surprised.' Get the jumper cables and the burban, hook everything up, turn the ignition and snap, the key breaks off. Ok, it was the only key. I know this was stupid of me but I've been trying several places and none had the right blank. Any ideas? Can a locksmith make a key from the lock? I've checked LMC and they have the locks, and the ignition switch but not a set that's key'd alike. Me likes the one key setup. Anyone been down this road? Thanks.

05-02-2007, 12:58 AM	#2
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Ingnition Switch / Door Locks I got a set from cheyenne pickup parts about 4 years ago that covered the Ignition switch, doors, and glove box. Early classic has the same kit. P/N 05-LKSS99 $50 i know there are others out there but i can't remember __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill Last edited by brak; 05-02-2007 at 12:59 AM.

05-02-2007, 01:01 AM	#3
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,995	Re: Ingnition Switch / Door Locks Yes a locksmith can key that up for you.

05-03-2007, 01:42 AM	#4
brak Registered User Join Date: Apr 2006 Location: MinneSNOWta Posts: 1,381	Re: Ingnition Switch / Door Locks I didn't have the number at the time, but i would suggest GMC Pauls. He has the complete kit including glove box lock: P/N 522820 $39.95 Not to mention he's a site supporter, and highly reccomended. __________________ 2003 GMC Sierra 1500 WT 1995 Nissan Hardbody 2016 Hyundai Veloster Turbo DC2 (SW/AW) Clyde W. Harvey USN "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill

05-03-2007, 11:10 AM	#5
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Re: Ingnition Switch / Door Locks I have bought a couple one-key sets on eBay, so they are out there. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

05-03-2007, 03:32 PM	#6
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,655	Re: Ingnition Switch / Door Locks - Did you get the broken piece out of the switch? If so you can send me the two pieces and I can cut you two new keys and send them back to you for 5 bucks. If interested PM me.... LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

05-03-2007, 05:47 PM	#8
jimmydean Registered User Join Date: May 2005 Location: Beaverton, OR Posts: 3,728	Re: Ingnition Switch / Door Locks I got the set from GMC Pauls and it was perfect for my '73, I'm sure it's the same for the 67-72. Always quality with that guy over there. __________________ New Project: 1966 LWB C20 Plans: 1/2 ton conversion Dropmember front Dropmember rear Corvette discs Restored raised bed http://67-72chevytrucks.com/vboard/s....php?p=4295210

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.