![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Apr 2007
Location: New Freedom, PA
Posts: 4
|
Questions from the new guy
Hi all...I'm new here, name's Josh. I've got a 68 long stepside, 350/350. My motor is consuming oil pretty bad...at least a quart a week depending on how much I drive it(i try to ride the motorcycle as much as I can, its a little cheaper on gas). There are no oil puddles or drips when the truck sits, so I'm guessing that it's valve seats and piston rings, so the cylinder walls are probably a little scratched up too. I changed the spark plugs a few weeks ago and they looked like they had been dipped in chocolate cake batter, just after 2 months of driving. I've heard a lot of horror stories about machine shop prices, and being that the engine is over 30 years old with an unknown amount of miles on it, i'm not so sure that I'd like to spend the time or money to revamp it. Its not the original engine so I'm not concerned about matching numbers. I was talking with the kid at advance auto parts one day and he said they could sell me a rebuilt 350 with a warranty for a thousand bucks, I just have to return my engine to them. Has anyone ever bought one of these or heard anything about them? I'm not looking for gobs of horsepower, the truck is my only 4-wheeled driver so I need it to be pretty reliable. But I would definitely like to keep a v8 in it. What do you guys usually do when you need a cheap reliable motor that you can get a decent amount of miles out of? The transmission also started slipping the other day, but I'm afraid to change the fluid because I dont know if its ever been changed before. How difficult is it to rebuild a turbo 350? I'm a harley mechanic so I'm pretty well mechanically inclined, but I'm relatively new to the four wheeled scene. I've only had the truck for a few months. Oh and another question...as far as the outside of the truck goes, I'm going to do a mild drop, flat black, paint the wheels red or black, and....is it true what I hear about all tires with raised white lettering? Are there really wide whites underneath there? If anyone can answer one or all of these questions I'd sure appreciate it. If anyone has pictures of a truck that sounds similar to what I want to do, it would be cool to to see that too. Thanks
Josh |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2005
Location: Smith Mountain Lake Virginia
Posts: 1,537
|
Re: Questions from the new guy
If you do a search (on the left hand side of the screen at the top of this section) - you can look for "crate" and also for do some searching for the whitewall stuff (there's a post of someone who ground off the black to make wide whites) - it might take a couple different search words to find it (there's a 30 second delay between being able to do each "search"). Welcome to the site - it's nice here, no flaming allowed, friendly bunch of people and probably more than you could ever want to find out about your truck. Try the search feature - there's a TON of stuff here.
__________________
"A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Jan 2007
Location: Athens, GA
Posts: 112
|
Re: Questions from the new guy
I've never bought a GM crate engine, but I've heard a lot of good things about them. The warrenty really makes it nice. I'd shop around for one before I bought one from advance, you may find one cheaper on Jegs or Summit or a multitude of other online stores, watch for the shipping it'll cost, so make sure the lower price makes it cheaper.
You should be able to get the tranny rebuilt for a couple hundred bucks, I'd definately go ahead and do it while you've got the motor out if it's already slipping. Good luck, and welcome to the board. Ronnie
__________________
1968 C10 Stepside 396 bored .030 TH400 |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Questions from the new guy
i bought a remanufactured engine from advanced auto parts a few years ago// mismatched heads one head rebuilt with everything new other head rebuilt using all used parts, 2 out of 8cylinders bored 80thousand the other 6 cyl bored 40thousand some new some old connecting rods same with pushrods and rocker arms a real mismosh of parts // but i will say it did run good but i just had no confidance in the long term life so i sold that car pretty quickly
you look at it if you're going to buy gm is all brand new stuff for really not all the much more money by far the easiest way is a turnkey plug and play engine if you can strech the budget / i've gotten from www.enginefactory.com and been very happy with the product
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#5 |
Hittin E-Z Street on Mud Tires
![]() Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: Questions from the new guy
I went with an Advance motor about 4 years ago. They were only $800 after core back then. I've put 7K on it so far. Seems to be ok? No smoke or oil usage.
*IF* I had the $$$ I'd prefer a GM crate engine. You can get one from a local dealer for around $1,600.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride ![]() American Born, Country by the Grace of God ![]() 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|