wtb inline 6 mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

laidout · 06-07-2007, 10:45 PM

seeing if anyone has some laying around i think i threw mine away

the mount that bolts to the frame thanks

**Captainfab** · 06-13-2007, 01:20 AM

Which 6cyl.....250 or 292? AFAIK the 250 frame mounts are the same as the SB ones. If you need them for a 292 I have'm. PM me if you're interested....got the SB ones too.

N2GMTrux · 06-13-2007, 08:37 PM

Put me next in-line..... If laidout passes I'm interested in the 250 mounts a complete set. Engine steel mounts, rubber motor mounts, and frame saddle mounts. Thanks!!

laidout · 06-13-2007, 11:17 PM

ill pass for now i got a ls1 i think im going that rought

**Captainfab** · 06-14-2007, 02:05 AM

Quote:

Originally Posted by N2GMTrux

Put me next in-line..... If laidout passes I'm interested in the 250 mounts a complete set. Engine steel mounts, rubber motor mounts, and frame saddle mounts. Thanks!!

All I would have are the frame mounts.....I just need to verify that they are the same as the SB ones. I'm pretty sure they are, I just don't remember for sure.

**Captainfab** · 06-18-2007, 01:17 AM

Everything I've found says that the frame mounts for the 250 engine are the same as the SB ones. PM me if you need some.

N2GMTrux · 06-19-2007, 08:34 PM

Quote:

Originally Posted by Captainfab

Everything I've found says that the frame mounts for the 250 engine are the same as the SB ones. PM me if you need some.

Thanks Captainfab,,, but I need a complete set. And yes your right the inline six frame mounts and the 350 frame mounts are the same. Thank you, for check!!!!!!!!!!

mbgmike · 06-18-2007, 04:36 PM

Quote:

Originally Posted by N2GMTrux

Put me next in-line..... If laidout passes I'm interested in the 250 mounts a complete set. Engine steel mounts, rubber motor mounts, and frame saddle mounts. Thanks!!

i have the engine mounts and the motor mounts both used

N2GMTrux · 06-19-2007, 08:39 PM

Quote:

Originally Posted by mbgmike

i have the engine mounts and the motor mounts both used

Can you P.M, me with cost and shipping to Ft. Worth TX 76133. And a pic please to make sure its the 69-72 model mounts, I need them to work with certain brakets I have which the later year mounts will not work with.

06-07-2007, 10:45 PM	#1
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	wtb inline 6 mounts seeing if anyone has some laying around i think i threw mine away the mount that bolts to the frame thanks

06-13-2007, 01:20 AM	#2
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: wtb inline 6 mounts Which 6cyl.....250 or 292? AFAIK the 250 frame mounts are the same as the SB ones. If you need them for a 292 I have'm. PM me if you're interested....got the SB ones too. Last edited by Captainfab; 06-13-2007 at 01:21 AM.

06-13-2007, 08:37 PM	#3
N2GMTrux Registered User Join Date: Jan 2007 Location: Fort Worth, TX 76133 Posts: 406	Re: wtb inline 6 mounts Put me next in-line..... If laidout passes I'm interested in the 250 mounts a complete set. Engine steel mounts, rubber motor mounts, and frame saddle mounts. Thanks!! __________________ ...try'n to be a little! This is a great site. http://67-72chevytrucks.com/vboard/s...d.php?t=157669 http://www.67-72chevytrucks.com/vboa...d.php?t=375640

06-13-2007, 11:17 PM	#4
laidout Active Member Join Date: Feb 2004 Location: Bartlesville,ok Posts: 275	Re: wtb inline 6 mounts ill pass for now i got a ls1 i think im going that rought

06-18-2007, 01:17 AM	#6
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: wtb inline 6 mounts Everything I've found says that the frame mounts for the 250 engine are the same as the SB ones. PM me if you need some.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.