AC fittings`134a - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DennyB · 07-02-2007, 10:30 AM

The adaptor fittings in conversion kit do not fit the '72.
Any one know where I can get the correct adaptors for the conversion?

JimKshortstep4x4 · 07-02-2007, 08:37 PM

I got my adapter from the local parts store. They carry a selection of adapters. (It is an Auto Value which is a national chain). I would think other parts suppliers would have them, also.

Jim

jkade · 07-02-2007, 08:44 PM

Mine came in a 134 conversion kit and they worked fine.

eedgell · 07-02-2007, 08:45 PM

All of the ones I have converted have been the kit from wal-mart. Worked every time.

DennyB · 07-03-2007, 01:14 PM

Hmm, Thats odd. The kit I got has three odd (read metric) fittings.
At this point I'll just use the fittings on the gauges. I realized the standard fittings on the gauges with all the adaptors removed screw right on

.
That thread is what? 3/8 NC? 5/16 NC?

CST*TEN in Katy · 07-03-2007, 02:48 PM

I believe the fittings are 1/4" flare tubing. I did my R-134 charge last week, I put the adapter fitting on the center port of my gauges, that allowed me to use the R-134 cans through my old gauges and my stock R-12 ports.

Nachos82 · 07-03-2007, 03:05 PM

DennyB, did you buy the kit from WalMart? I bought a conversion kit there a while back, and it came with two of the same wrong size/style fitting. I took it back and got anouther one and it worked fine. Not sure how that could happen, but it was a bit strange.

DennyB · 07-03-2007, 03:39 PM

Quote:

Originally Posted by CST*TEN in Katy

I believe the fittings are 1/4" flare tubing. I did my R-134 charge last week, I put the adapter fitting on the center port of my gauges, that allowed me to use the R-134 cans through my old gauges and my stock R-12 ports.

That must be the size. This is also what I'm doing (using stock R-12 ports).

Quote:

Originally Posted by Nacho82

DennyB, did you buy the kit from WalMart? I bought a conversion kit there a while back, and it came with two of the same wrong size/style fitting. I took it back and got anouther one and it worked fine. Not sure how that could happen, but it was a bit strange.

No, I got them at a parts store a few years ago. The fittings in these are 3 types and sizes. The directions say they fit down to 1978.

I'm not an AC guru and have no idea when all the changes took place.

What I didn't realize before this post was the fittings fit my hoses w/o the adapters, I can evacuate and fill through the center hose, so its a simple solution. Just as CST*TEN above has done.

07-02-2007, 10:30 AM	#1
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	AC fittings`134a The adaptor fittings in conversion kit do not fit the '72. Any one know where I can get the correct adaptors for the conversion? __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider

07-02-2007, 08:37 PM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: AC fittings`134a I got my adapter from the local parts store. They carry a selection of adapters. (It is an Auto Value which is a national chain). I would think other parts suppliers would have them, also. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

07-02-2007, 08:44 PM	#3
jkade Senior Member Join Date: Nov 2005 Location: AL Posts: 2,517	Re: AC fittings`134a Mine came in a 134 conversion kit and they worked fine.

07-02-2007, 08:45 PM	#4
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: AC fittings`134a All of the ones I have converted have been the kit from wal-mart. Worked every time. __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

07-03-2007, 01:14 PM	#5
DennyB Led Sled! Discs R 4 ME! Join Date: Jan 2001 Location: Toms River, NJ, USA (Transplanted Hoosier) Posts: 7,327	Re: AC fittings`134a Hmm, Thats odd. The kit I got has three odd (read metric) fittings. At this point I'll just use the fittings on the gauges. I realized the standard fittings on the gauges with all the adaptors removed screw right on . That thread is what? 3/8 NC? 5/16 NC? __________________ "Never ride faster than your Angel can fly" I.M.O.M,W,J&C Patriot Guard Rider Last edited by DennyB; 07-03-2007 at 01:15 PM.

07-03-2007, 02:48 PM	#6
CST*TEN in Katy Registered User Join Date: Jul 2005 Location: Katy, TX Posts: 48	Re: AC fittings`134a I believe the fittings are 1/4" flare tubing. I did my R-134 charge last week, I put the adapter fitting on the center port of my gauges, that allowed me to use the R-134 cans through my old gauges and my stock R-12 ports. __________________ 1970 CST-10 owned it 26 years, finally back on the road after a 10 year rest. 1989 Suburban 1971 Sleekcraft 455Olds Berkeley 1992 SC400 pimp ricer

07-03-2007, 03:05 PM	#7
Nachos82 Registered User Join Date: Feb 2007 Location: Central Florida Posts: 166	Re: AC fittings`134a DennyB, did you buy the kit from WalMart? I bought a conversion kit there a while back, and it came with two of the same wrong size/style fitting. I took it back and got anouther one and it worked fine. Not sure how that could happen, but it was a bit strange.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.