Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
07-05-2007, 12:42 PM | #1 |
Registered User
Join Date: Mar 2007
Location: SoCal
Posts: 9
|
70 C-30 Hooker 2452 install problem
I read a lot of post on headers, decided on the ceramic coated hooker 2452's
Everybody liked how they fit, but of course I've got the oddball. Thought I'd install them today but driver side header does not clear the crossmember. Front header bolt lines up but rear of header 1/4" to 1/2" to high because it's resting on the crossmember. Anybody else run into this, are there taller motor mounts available. Any help would be appreciated. Thanks WT |
07-05-2007, 05:49 PM | #2 |
Registered User
Join Date: Mar 2007
Location: SoCal
Posts: 9
|
Re: 70 C-30 Hooker 2452 install problem
2nd thought is maybe it's a issue with the tranny mount, if back of motor is to low maybe tranny needs to be raised.
Any feedback on what to look for would be appreciated Thanks |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|