67 LWB for $250.00 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mt Man Chad · 07-10-2007, 04:50 PM

Found a 67 LWB C-10 for $250

No motor in it. It still has the original manual trans and the interior is complete and clean. The cab is clean except one corner will need to be replaced. The bed is nice, super clean floor and all minus front panel is pretty rotted out on top and will need to be replaced.

Do ya think it's worth it.............. am I

to buy YET another truck...

I do love the 67~68 trucks!!!

BAGGERSOCAL · 07-10-2007, 04:52 PM

buy it.............

Bob Moore · 07-10-2007, 04:55 PM

Go Chad go! - Bob

67ChevyRedneck · 07-10-2007, 04:55 PM

Do you seriously need to ask? I mean $200 for a substantially rust free truck... you ought to be kickin yourself for not having bought it already!

New motor, Maaco paint job, 5K on ebay

bad_turbo · 07-12-2007, 07:16 PM

Quote:

Originally Posted by 67ChevyRedneck

Do you seriously need to ask? I mean $200 for a substantially rust free truck... you ought to be kickin yourself for not having bought it already!

New motor, Maaco paint job, 5K on ebay

or maybe we should kick him?

67ChevyRedneck · 07-12-2007, 09:01 PM

Quote:

Originally Posted by bad_turbo

or maybe we should kick him?

I don't normally condone violence, but in this case, I guess it would be ok?

J/K man, congrats on the purchase!

**Yukon Jack** · 07-10-2007, 04:56 PM

That is definitely a buy! BTW, what is the truck to the right of it?

Aarons72s · 07-10-2007, 05:01 PM

Buy it! Heck the tailgate looks worth more than the asking price.

Kurt L · 07-10-2007, 05:29 PM

buy it buy it NOWWWWWWWWWWW

jb4short · 07-10-2007, 05:44 PM

250.00? You guys in the west kill me.....LOL

jb4short · 07-10-2007, 05:45 PM

that driver's side looks STRAIGHT...omg...start sending trucks to NJ

LOW DOUGH · 07-10-2007, 05:53 PM

Buy it!!! I got less than that for $800. No motor or trans. I needed a rearend and other stuff.

This is my parts truck & that is not me

dmsteele92831 · 07-10-2007, 05:54 PM

Great deal, I'd part it though personally unless you wanna drop $5-$10k just to make it descent and reliable

mnunn454 · 07-10-2007, 06:22 PM

You sure it's a 67? Can't tell for sure but that hood looks awfully blunt for a 67.

If it's a true 67, buy it (or let me buy it) for $250.

1-2many · 07-10-2007, 08:10 PM

That rear tire looks a little out of round and that's not a 67 fender. I'm sure he'll take 200 and a six pack of Oly once you point out those major flaws.

Don't delay!

Dingfodgy · 07-10-2007, 08:57 PM

Dude! You gotta be high to even hesitate! I paid that much for a front clip for my '67. BTW- the cab and bed are most definately '67, but the front sheet metal appears to be 69-72.
Nonetheless, if you're looking for affirmation.......BUY IT NOW or some kniving bloke (present company excluded) will make off with it in a NY minute!

Ram-Man · 07-10-2007, 09:05 PM

Quote:

Originally Posted by 1-2many

That rear tire looks a little out of round and that's not a 67 fender. I'm sure he'll take 200 and a six pack of Oly once you point out those major flaws.

Don't delay!

The rear tire is only flat on the bottom though. The rest of the tire looks fine. I'd jump on it for $250.

redhead69 · 07-10-2007, 09:29 PM

that wrap around bumpers worth $200! lol

*Billla* · 07-10-2007, 09:34 PM

I'll take the bed

Mt Man Chad · 07-10-2007, 10:43 PM

Yep it's a 70 Chevy hood just checked, that's why the hood does not close.

I'm picking it up tomorrow night, more pic's to come...

xshadow · 07-10-2007, 11:04 PM

You should see what you get for 250 here in Virginia....or even 1500.00. It looks like you guys don't see much rust out your way.
If you want something unusual I’m willing to trade you trucks. Once you get in in running condition maybe we could meet half way and swap trucks.
Or I could get some rusted cab corners for you to weld in I could give you a great deal on them. I even have some spare fenders that are rusted out that I would throw in for free.

LOW DOUGH · 07-11-2007, 05:42 PM

Well did you buy it yet

2bits · 07-11-2007, 07:03 PM

Heck of a deal for any 67-72 year model! Small rear window, you won't feel bad about this one coming home!

orange72c10 · 07-11-2007, 07:17 PM

Very nice, what a deal!

Gray Ghost · 07-11-2007, 08:03 PM

I wouldn't even have had to ask about buying this one....hope you got it. What a deal!

07-10-2007, 04:50 PM	#1
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	67 LWB for $250.00 Found a 67 LWB C-10 for $250 No motor in it. It still has the original manual trans and the interior is complete and clean. The cab is clean except one corner will need to be replaced. The bed is nice, super clean floor and all minus front panel is pretty rotted out on top and will need to be replaced. Do ya think it's worth it.............. am I to buy YET another truck... I do love the 67~68 trucks!!! Attached Images __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread Last edited by Mt Man Chad; 07-12-2007 at 05:42 PM.

07-10-2007, 04:52 PM	#2
BAGGERSOCAL Active Member Join Date: May 2007 Location: SO CAL Posts: 226	Re: 67 LWB for $250.00 buy it.............

07-10-2007, 04:55 PM	#3
Bob Moore Registered User Join Date: Feb 2004 Location: Tacoma WA Posts: 1,365	Re: 67 LWB for $250.00 Go Chad go! - Bob __________________ 67 C-20 LWB, tilt, speed alert, vac, 454, T400 67 C-10 SWB, factory air with more to follow

07-10-2007, 04:55 PM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 67 LWB for $250.00 Do you seriously need to ask? I mean $200 for a substantially rust free truck... you ought to be kickin yourself for not having bought it already! New motor, Maaco paint job, 5K on ebay __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 07-10-2007 at 04:56 PM.

07-10-2007, 04:56 PM	#7
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: 67 LWB for $250.00 That is definitely a buy! BTW, what is the truck to the right of it? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

07-10-2007, 05:01 PM	#8
Aarons72s Registered User Join Date: Apr 2006 Location: oklahoma Posts: 10,669	Re: 67 LWB for $250.00 Buy it! Heck the tailgate looks worth more than the asking price.

07-10-2007, 05:29 PM	#9
Kurt L Senior Member Join Date: May 2003 Location: ne florida Posts: 2,665	Re: 67 LWB for $250.00 buy it buy it NOWWWWWWWWWWW

07-10-2007, 05:44 PM	#10
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: 67 LWB for $250.00 250.00? You guys in the west kill me.....LOL

07-10-2007, 05:45 PM	#11
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: 67 LWB for $250.00 that driver's side looks STRAIGHT...omg...start sending trucks to NJ

07-10-2007, 05:53 PM	#12
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: 67 LWB for $250.00 Buy it!!! I got less than that for $800. No motor or trans. I needed a rearend and other stuff. This is my parts truck & that is not me

07-10-2007, 05:54 PM	#13
dmsteele92831 Registered User Join Date: Oct 2006 Location: SoCal Posts: 191	Re: 67 LWB for $250.00 Great deal, I'd part it though personally unless you wanna drop $5-$10k just to make it descent and reliable __________________ 1968 c10 Chevy 2005 Infiniti G35 2006 Subaru WRX STi

07-10-2007, 06:22 PM	#14
mnunn454 Registered User Join Date: Dec 2006 Location: Rhode Island Posts: 602	Re: 67 LWB for $250.00 You sure it's a 67? Can't tell for sure but that hood looks awfully blunt for a 67. If it's a true 67, buy it (or let me buy it) for $250. __________________ 69 C-10 SWB Fleetside 454/TH400 (For Sale) http://67-72chevytrucks.com/vboard/c...ct=1299&cat=12 70 El Camino 454 TH700 29 Model A 4-DR Sedan Deluxe

07-10-2007, 08:10 PM	#15
1-2many Registered User Join Date: Jun 2006 Location: Central California Posts: 39	Re: 67 LWB for $250.00 That rear tire looks a little out of round and that's not a 67 fender. I'm sure he'll take 200 and a six pack of Oly once you point out those major flaws. Don't delay! __________________ Free beer is good beer.

07-10-2007, 08:57 PM	#16
Dingfodgy Lemme show you something!! Join Date: Apr 2007 Location: St.Helens, OR. Posts: 876	Re: 67 LWB for $250.00 Dude! You gotta be high to even hesitate! I paid that much for a front clip for my '67. BTW- the cab and bed are most definately '67, but the front sheet metal appears to be 69-72. Nonetheless, if you're looking for affirmation.......BUY IT NOW or some kniving bloke (present company excluded) will make off with it in a NY minute! __________________ '67 CST-10 LWB ("Crusty") SOLD '67 GMC SWB ("Murdock") 2000 K1500 Suburban ("Betty") '95 BMW 325i ("Joy")

07-10-2007, 09:29 PM	#18
redhead69 fugedaboutit Join Date: Mar 2005 Location: Gresham, OR Posts: 832	Re: 67 LWB for $250.00 that wrap around bumpers worth $200! lol __________________ Currently truckless



Register or Log In To remove these advertisements.

07-10-2007, 09:34 PM	#19
Billla Account Suspended Join Date: Sep 2005 Location: Monroe, WA Posts: 3,814	Re: 67 LWB for $250.00 I'll take the bed

07-10-2007, 10:43 PM	#20
Mt Man Chad Registered User Join Date: Oct 2006 Location: Oakridge Oregon Posts: 1,864	Re: 67 LWB for $250.00 Yep it's a 70 Chevy hood just checked, that's why the hood does not close. I'm picking it up tomorrow night, more pic's to come... __________________ 68 CST SWB - Gold/White 50th anniversary /TH350/Buddy Buckets/3.73 Posi/dogdish caps. 68 K10 Burb - Gold/White 327/SM465/NP205/3.73 "Daa Burb" build thread

07-10-2007, 11:04 PM	#21
xshadow Registered User Join Date: Apr 2006 Location: va Posts: 553	Re: 67 LWB for $250.00 You should see what you get for 250 here in Virginia....or even 1500.00. It looks like you guys don't see much rust out your way. If you want something unusual I’m willing to trade you trucks. Once you get in in running condition maybe we could meet half way and swap trucks. Or I could get some rusted cab corners for you to weld in I could give you a great deal on them. I even have some spare fenders that are rusted out that I would throw in for free.

07-11-2007, 05:42 PM	#22
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: 67 LWB for $250.00 Well did you buy it yet Last edited by LOW DOUGH; 07-11-2007 at 05:42 PM.

07-11-2007, 07:03 PM	#23
2bits Registered User Join Date: Jan 2006 Location: Dallas Posts: 504	Re: 67 LWB for $250.00 Heck of a deal for any 67-72 year model! Small rear window, you won't feel bad about this one coming home! __________________ _______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club

07-11-2007, 07:17 PM	#24
orange72c10 Registered User Join Date: Jun 2007 Location: New York Posts: 153	Re: 67 LWB for $250.00 Very nice, what a deal!

07-11-2007, 08:03 PM	#25
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: 67 LWB for $250.00 I wouldn't even have had to ask about buying this one....hope you got it. What a deal! __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps. Last edited by Gray Ghost; 07-11-2007 at 08:03 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.