Lower A-arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sevenwonder · 09-21-2002, 03:10 AM

Is the lower a-arms the same on a 69 1/2 ton with drums as to a 72 1/2 ton with disc? both 2 wheel drive.
Also is it correct that the sway bay will fit from the 69 to the 72.

*Fast68Chevy* · 09-21-2002, 03:49 AM

the big steering stops welded to the lower arms will probably ot be locate din same place from a 69 to a 71, a tape measure will tell you that or not.

no other differences however, and 73-up arms with the rubber bushings will bolt under your truck too

and any sway bar up through 1 ton will bolt onto your truck from '64-87
not van ones though

happy swapping

09-21-2002, 03:10 AM	#1
sevenwonder Registered User Join Date: Mar 2002 Location: Shady Spring,WV Posts: 37	Lower A-arms Is the lower a-arms the same on a 69 1/2 ton with drums as to a 72 1/2 ton with disc? both 2 wheel drive. Also is it correct that the sway bay will fit from the 69 to the 72. __________________ 70 short,step on a 72 frame.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-21-2002, 03:49 AM	#2
Fast68Chevy Account Suspended Join Date: May 2000 Location: IL Posts: 0	the big steering stops welded to the lower arms will probably ot be locate din same place from a 69 to a 71, a tape measure will tell you that or not. no other differences however, and 73-up arms with the rubber bushings will bolt under your truck too and any sway bar up through 1 ton will bolt onto your truck from '64-87 not van ones though happy swapping



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.