Harmonic Balancer Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skokie · 08-03-2007, 03:50 PM

How far back does the balancer have to go on the crank? Reason I ask is that when I installed my new balancer I noticed that the power steering pulley is off a little. I dont remember it being off before but I may not have noticed it.

Thanks

eedgell · 08-03-2007, 05:39 PM

Pull it and check your key and the key way for burs.

PDomes7277 · 08-03-2007, 05:49 PM

I just finished putting my H-balancer back on the other day for my 350/350. I measured before I took it off and measured again when I put it back on. It came out to be exactly 1 inch if measured from the center of the H-balancer.

Regards,
Paul
Beaumont, TX

skokie · 08-03-2007, 06:41 PM

Ok I type tped this wrong. I found the problem. The old balancer had a 1/8 inch lip on the front of it. This new balancer does not have it. I measured the belts and they are just about 1/8th of an inch off. Looks like its time to pull another balancer

Im getting good at this stuff LOL

matthufham · 08-04-2007, 01:08 PM

my new balancer went in farther than my old one so i spaced the crank pulley to match the other pulleys

08-03-2007, 03:50 PM	#1
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,338	Harmonic Balancer Question How far back does the balancer have to go on the crank? Reason I ask is that when I installed my new balancer I noticed that the power steering pulley is off a little. I dont remember it being off before but I may not have noticed it. Thanks __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

08-03-2007, 05:39 PM	#2
eedgell It's the air up here Join Date: Mar 2007 Location: Western Colorado Posts: 710	Re: Harmonic Balancer Question Pull it and check your key and the key way for burs. __________________ 1971 cheyenne k10 4 speed np 205 454 BB factory a/c Never drink down stream of the herd! Eric

08-03-2007, 05:49 PM	#3
PDomes7277 Registered User Join Date: Jun 2007 Location: Houston, Texas Posts: 45	Re: Harmonic Balancer Question I just finished putting my H-balancer back on the other day for my 350/350. I measured before I took it off and measured again when I put it back on. It came out to be exactly 1 inch if measured from the center of the H-balancer. Regards, Paul Beaumont, TX

08-03-2007, 06:41 PM	#4
skokie Registered User Join Date: Oct 2003 Location: San Jose Ca. Posts: 3,338	Re: Harmonic Balancer Question Ok I type tped this wrong. I found the problem. The old balancer had a 1/8 inch lip on the front of it. This new balancer does not have it. I measured the belts and they are just about 1/8th of an inch off. Looks like its time to pull another balancer Im getting good at this stuff LOL __________________ RIP to my son Dylan. 5/17/2002 - 8/18/2018 If you want to know more about rare forms of pediatric cancer or if you want to help fund pediatric cancer research, please check out the website for the non-profit I started. https://slothforpedcancer.org 68 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=223234

08-04-2007, 01:08 PM	#5
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Harmonic Balancer Question my new balancer went in farther than my old one so i spaced the crank pulley to match the other pulleys

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.