clutch linkage in a '67 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dan42 · 08-23-2007, 03:35 PM

Can anyone tell me if this is a stock configuration for my clutch linkage, or did someone mess with it? Looks like someone cut it and welded it to me, but I'm not sure what stock is suppose to look like. It had a 3 speed in it from the factory, now it has a 4 speed.

dan42 · 08-23-2007, 06:43 PM

ttt

dan42 · 08-23-2007, 09:51 PM

ttt

Twistedsteel · 08-23-2007, 10:18 PM

Is that a piece of rebar next to it? If it is it's a good chance it's been molested. Sorry I don't know very much about the linkages. I did just pick up a 67 myself and it has a 4 speed not sure if it looks like that though. I'll look tomarrow and maybe snap a pic.
Albie

dan42 · 08-24-2007, 03:34 PM

lol! no, it's not, but I'm not sure what it is. Anybody know if the clutch likage has been modified or not?

Lated · 08-24-2007, 03:59 PM

The "rebar" is either the spedo cable tube or the parking brake, my guess is parking brake. The linkage on my 70 comes straight out with no bends. I bet the other end of the piece that I drew the arrow to is bent towards the drivers side. On mine it is straight. Looks like it was a 3 on the tree like mine. Hope this helps.

**John Fabris** · 08-24-2007, 04:00 PM

The rebar looking thing is actually the ebrake cable.... Don't know about the clutch pedal linkage, looking for other pictures to campare with....

Is your shifter on the floor now? As the shifter rods are not on the column...

Lated · 08-24-2007, 04:12 PM

I just ran out and snapped a couple pics of mine. Reminds me I need to get a cotter pin to replace that nail. The duct tape is just there to keep cold air off my nuts in the winter

dan42 · 08-24-2007, 04:10 PM

Yeah, it's a four speed on the floor. Just trying to figure out what the P.O. did.

**John Fabris** · 08-24-2007, 04:13 PM

Here are two more pictures from the board here that appear to show the same clutch pedal rod....

Lated · 08-24-2007, 04:16 PM

Hmmm... makes me wonder if mine is wrong or if there is just that much difference between the 67 and 70.

**john** · 08-24-2007, 05:22 PM

Could it be 6cyl v 8cyl?

PanelDeland · 08-24-2007, 06:02 PM

Lated,I can give you incentive to get the cotter key.I bought a truck and it had the nail fix like on yours.Worked real good for about 2 years(actually I never even thought about it).One afternoion I shifted into third on the highway and the clutch felt somewhat mushy.No big deal I'll check it when I get to the exit a couple miles down the Interstate.When I pulled over and shut down the engine I got a cloud of smoke.The ball pivot had snapped off and the clutch linkage shifted,causing the bell crank(the levered pivot) to lay against the oil filter with the nail point into the tin.The oil had pumped out a little at a time and the engine never ran again.When I replaced the engine I also repaired the oil guage.
So...Go Get a danged cotter pin!!!!

68gmsee · 08-24-2007, 06:09 PM

I've got a 68 GMC 250 with 3 speed and the clutch rod is straight, like the one in "Lated's" picture.

I also have a 69 Chev that had a 250 and a 3 speed and it was also straight.

MyakkaJeff · 08-24-2007, 06:07 PM

dan42- My 68 with 3 on the tree is the same as yours. Even the weld is identical.

MyakkaJeff · 08-24-2007, 06:20 PM

68gmsee's are straight on his 6 cyl's. Mine is a V8, maybe thats the difference.

dan42 · 08-24-2007, 10:21 PM

Yeah, that's probably it - straight on the sixes, crooked on the eights.

08-23-2007, 03:35 PM	#1
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	clutch linkage in a '67 Can anyone tell me if this is a stock configuration for my clutch linkage, or did someone mess with it? Looks like someone cut it and welded it to me, but I'm not sure what stock is suppose to look like. It had a 3 speed in it from the factory, now it has a 4 speed. Attached Images __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-23-2007, 06:43 PM	#2
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: clutch linkage in a '67 ttt __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-23-2007, 09:51 PM	#3
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: clutch linkage in a '67 ttt __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-23-2007, 10:18 PM	#4
Twistedsteel Registered User Join Date: Feb 2005 Location: Redway, Ca Posts: 97	Re: clutch linkage in a '67 Is that a piece of rebar next to it? If it is it's a good chance it's been molested. Sorry I don't know very much about the linkages. I did just pick up a 67 myself and it has a 4 speed not sure if it looks like that though. I'll look tomarrow and maybe snap a pic. Albie

08-24-2007, 03:34 PM	#5
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: clutch linkage in a '67 lol! no, it's not, but I'm not sure what it is. Anybody know if the clutch likage has been modified or not? __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-24-2007, 03:59 PM	#6
Lated Registered User Join Date: Feb 2007 Location: Colorado Posts: 255	Re: clutch linkage in a '67 The "rebar" is either the spedo cable tube or the parking brake, my guess is parking brake. The linkage on my 70 comes straight out with no bends. I bet the other end of the piece that I drew the arrow to is bent towards the drivers side. On mine it is straight. Looks like it was a 3 on the tree like mine. Hope this helps. Attached Images __________________ “If you don’t have time to do it right now, how will you ever find time to fix it.” - author unknown '70 SWB Step-Side (More rust than metal)

08-24-2007, 04:00 PM	#7
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: clutch linkage in a '67 The rebar looking thing is actually the ebrake cable.... Don't know about the clutch pedal linkage, looking for other pictures to campare with.... Is your shifter on the floor now? As the shifter rods are not on the column... __________________ John Fabris 67 C10 SWB

08-24-2007, 04:12 PM	#8
Lated Registered User Join Date: Feb 2007 Location: Colorado Posts: 255	Re: clutch linkage in a '67 I just ran out and snapped a couple pics of mine. Reminds me I need to get a cotter pin to replace that nail. The duct tape is just there to keep cold air off my nuts in the winter Attached Images __________________ “If you don’t have time to do it right now, how will you ever find time to fix it.” - author unknown '70 SWB Step-Side (More rust than metal)

08-24-2007, 04:10 PM	#9
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: clutch linkage in a '67 Yeah, it's a four speed on the floor. Just trying to figure out what the P.O. did. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

08-24-2007, 04:13 PM	#10
John Fabris TOTY 2006 Join Date: Dec 1999 Location: Magalia CA USA Posts: 2,270	Re: clutch linkage in a '67 Here are two more pictures from the board here that appear to show the same clutch pedal rod.... Attached Images __________________ John Fabris 67 C10 SWB

08-24-2007, 04:16 PM	#11
Lated Registered User Join Date: Feb 2007 Location: Colorado Posts: 255	Re: clutch linkage in a '67 Hmmm... makes me wonder if mine is wrong or if there is just that much difference between the 67 and 70. __________________ “If you don’t have time to do it right now, how will you ever find time to fix it.” - author unknown '70 SWB Step-Side (More rust than metal)

08-24-2007, 05:22 PM	#12
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: clutch linkage in a '67 Could it be 6cyl v 8cyl? __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

08-24-2007, 06:02 PM	#13
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: clutch linkage in a '67 Lated,I can give you incentive to get the cotter key.I bought a truck and it had the nail fix like on yours.Worked real good for about 2 years(actually I never even thought about it).One afternoion I shifted into third on the highway and the clutch felt somewhat mushy.No big deal I'll check it when I get to the exit a couple miles down the Interstate.When I pulled over and shut down the engine I got a cloud of smoke.The ball pivot had snapped off and the clutch linkage shifted,causing the bell crank(the levered pivot) to lay against the oil filter with the nail point into the tin.The oil had pumped out a little at a time and the engine never ran again.When I replaced the engine I also repaired the oil guage. So...Go Get a danged cotter pin!!!! __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

08-24-2007, 06:09 PM	#14
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: clutch linkage in a '67 I've got a 68 GMC 250 with 3 speed and the clutch rod is straight, like the one in "Lated's" picture. I also have a 69 Chev that had a 250 and a 3 speed and it was also straight.

08-24-2007, 06:07 PM	#15
MyakkaJeff Junior Member Join Date: Dec 2006 Location: Florida, Myakka River Posts: 143	Re: clutch linkage in a '67 dan42- My 68 with 3 on the tree is the same as yours. Even the weld is identical. __________________ '63 C10 lwb flatbed '66 C10 lwb stepside '68 C10 lwb stepside (parts) '68 C10 lwb fleetside (17 yr old son's ongoing project) '03 HUMMER H2 (wife's) '06 3500 flatbed liftgate (My work truck)



Register or Log In To remove these advertisements.

08-24-2007, 06:20 PM	#16
MyakkaJeff Junior Member Join Date: Dec 2006 Location: Florida, Myakka River Posts: 143	Re: clutch linkage in a '67 68gmsee's are straight on his 6 cyl's. Mine is a V8, maybe thats the difference. __________________ '63 C10 lwb flatbed '66 C10 lwb stepside '68 C10 lwb stepside (parts) '68 C10 lwb fleetside (17 yr old son's ongoing project) '03 HUMMER H2 (wife's) '06 3500 flatbed liftgate (My work truck)

08-24-2007, 10:21 PM	#17
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: clutch linkage in a '67 Yeah, that's probably it - straight on the sixes, crooked on the eights. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.