|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
08-24-2007, 03:27 PM
|
#1 |
|
Oh,you can't buy that new
 
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Need answer ASAP- 6 lug to 5
if you have a donor 5 lug 71-72 2wd in front of you, and want to swap out your 6 lug front end what is the easiest way. will just a spindle swap work out? thanx, crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone  73 Pinto, stock, w/CragarSS's-eww  LOTS of Cummins trucks. |
|
|
|
08-24-2007, 03:52 PM
|
#2 |
|
It's a catastrophic success.
Join Date: Jan 2003
Location: Oklahoma
Posts: 2,077
|
Re: Need answer ASAP- 6 lug to 5
I think its easier to swap the whole cross member. The spindles arent a direct swap and you have to change A arms,tie rods,pitman. Where as 12 bolts and brake line and the whole thing rolls out.
|
|
|
|
|
08-24-2007, 03:55 PM
|
#3 |
|
TOTY 2006
 
Join Date: Dec 1999
Location: Magalia CA USA
Posts: 2,270
|
Re: Need answer ASAP- 6 lug to 5
Do a search on here. There are many combos, using the entire assembly is one, or replacing the outer tie rods, upper and lower ball joint and spindle is another way...
Last edited by John Fabris; 08-24-2007 at 03:55 PM. |
|
|
|
|
08-24-2007, 03:58 PM
|
#4 |
|
Oh,you can't buy that new
Join Date: Apr 2000
Location: Pennsville,N.J. 08070, USA
Posts: 2,039
|
Re: Need answer ASAP- 6 lug to 5
thanx, that's all i needed to know to tell a guy that wants my 5 lug front crossmember.
A search turned up SOOOOOOOOOOOOO many things unrelated with just the keywords that it cornfused me. thanx again, crossy
__________________
"been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks. |
|
|
|
|
08-24-2007, 04:04 PM
|
#5 |
|
Next project: 1970 K10
Join Date: Feb 2004
Location: Fort Collins, Colo 80524
Posts: 6,685
|
Re: Need answer ASAP- 6 lug to 5
About 10 bolts and the entire crossmember is out. That seems to be the easiest way, and the quickest way, to me.
__________________
Bob 1970 Chevy K10 LWB "Goldie" 350/TH350 next project!! 1981 Chevy C10 LWB 355/TH350 - My son's truck LS SWAP FORUM! Tons of LS swap info here! PLEASE CLICK HERE TO SUPPORT THE GREATEST BOARD ON THE NET! CLICK HERE FOR THE FAQ INDEX by KRUE |
|
|
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
