17 inch rims - The 1947 - Present Chevrolet & GMC Truck Message Board Network

john64 · 08-27-2007, 01:07 PM

Has anyone got any pics of trucks running 17 inch rims. What size tyres are you using.

Ackattack · 08-27-2007, 01:56 PM

I'm running 275/50/17s on 17x8 wheels

I think the 50 aspect ratio looks good on these trucks, cause the much more common 40 aspect ration is too short of a sidewall for 17" rims on trucks and the 60 aspect ratio is a little too tall for my taste. Only 2 companies make the 50 aspect ratio in this width, Nitto and Falken. I'm running the Falkens.

Andy4639 · 08-27-2007, 02:57 PM

17" stealth wheel. I'll have to look tonight when I get home for the size. I can't remember right off.

combustion · 08-27-2007, 07:35 PM

Quote:

Originally Posted by Andy4639

17" stealth wheel. I'll have to look tonight when I get home for the size. I can't remember right off.

is that a mustang 5.slow badge?

Andy4639 · 08-27-2007, 07:46 PM

combustion,

Quote:

is that a mustang 5.slow badge?

Yes it is and it's a lot better looking on a 305 HO TPI chevy truck than on a 5.0 Stang. in my opinion, don't you think!
Tires are

P255/60R-17's by the way.

see ten · 08-27-2007, 04:53 PM

Here ya go buddy!

http://67-72chevytrucks.com/vboard/s...d.php?t=143835

LUV2XCLR8 · 08-27-2007, 05:53 PM

Should have been on by now but one's bent from the factory

Maybe this weekend I'll try to get 3 out of 4 mounted for you.

72 Cheyenne402 · 08-27-2007, 09:25 PM

Quote:

Originally Posted by LUV2XCLR8

Should have been on by now but one's bent from the factory

Maybe this weekend I'll try to get 3 out of 4 mounted for you.

Really nice where did you get them and in what width are they?

LUV2XCLR8 · 08-27-2007, 09:38 PM

17 x 8 Wheel Vintiques Corvette Rally's (66 Series)

72BlckButy · 08-28-2007, 08:35 AM

Quote:

Originally Posted by LUV2XCLR8

17 x 8 Wheel Vintiques Corvette Rally's (66 Series)

Those are going to look sweet LUV! Be sure to post some pics when you get them mounted.

bad6772 · 08-27-2007, 10:14 PM

Name: MVC-054F.JPG
Views: 351
Size: 53.0 KB

Name: MVC-056F.JPG
Views: 342
Size: 46.7 KB

Name: MVC-055F.JPG
Views: 338
Size: 53.6 KB

Name: MVC-059F.JPG
Views: 341
Size: 48.6 KB

i am running old BOYDS with Weld centers .... i think BOYDS made this for Weld or visa versa i do have both centers but only have 2 boyds .ANy nfo on these wheels would be great all i know is they are rare and ultra rare in my sizes any info on these whould be great.....front are 17x9.5 with 275 40s and rear is 17x12/325 40 im not shure on off set ? but the rears have about 1/2 rubbing the inner wheel well i am wanting taller rear tires these are to small and they dont last long

ABLAZN · 08-27-2007, 11:05 PM

I know this is not what you are looking for, but if you want to go a little taller this might fit the bill.

17X9 Centerline Eclipse's with 315/70/17's (35 inches tall)

combustion · 08-27-2007, 11:26 PM

are they the same as these? these are my freinds rims. but there 20s. they kinda look like yours

centsless · 08-27-2007, 11:30 PM

Here's mine. 1995 Impala SS 17x9 wheels with P255/50ZR17 tires. They bolted right on with no adaptors, and don't rub at all.
Attachment 294122

08-27-2007, 01:07 PM	#1
john64 Registered User Join Date: Jul 2007 Location: Tayport, Scotland Posts: 11	17 inch rims Has anyone got any pics of trucks running 17 inch rims. What size tyres are you using.

08-27-2007, 01:56 PM	#2
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: 17 inch rims I'm running 275/50/17s on 17x8 wheels I think the 50 aspect ratio looks good on these trucks, cause the much more common 40 aspect ration is too short of a sidewall for 17" rims on trucks and the 60 aspect ratio is a little too tall for my taste. Only 2 companies make the 50 aspect ratio in this width, Nitto and Falken. I'm running the Falkens. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

08-27-2007, 02:57 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: 17 inch rims 17" stealth wheel. I'll have to look tonight when I get home for the size. I can't remember right off. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-27-2007, 04:53 PM	#6
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: 17 inch rims Here ya go buddy! http://67-72chevytrucks.com/vboard/s...d.php?t=143835

08-27-2007, 05:53 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: 17 inch rims Should have been on by now but one's bent from the factory Maybe this weekend I'll try to get 3 out of 4 mounted for you. Attached Images __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-27-2007, 09:38 PM	#9
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: 17 inch rims 17 x 8 Wheel Vintiques Corvette Rally's (66 Series) __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

08-27-2007, 10:14 PM	#11
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: 17 inch rims i am running old BOYDS with Weld centers .... i think BOYDS made this for Weld or visa versa i do have both centers but only have 2 boyds .ANy nfo on these wheels would be great all i know is they are rare and ultra rare in my sizes any info on these whould be great.....front are 17x9.5 with 275 40s and rear is 17x12/325 40 im not shure on off set ? but the rears have about 1/2 rubbing the inner wheel well i am wanting taller rear tires these are to small and they dont last long Last edited by bad6772; 08-27-2007 at 10:17 PM.

08-27-2007, 11:05 PM	#12
ABLAZN Oh..never mind.... Join Date: Aug 2006 Location: Oregon Posts: 588	Re: 17 inch rims I know this is not what you are looking for, but if you want to go a little taller this might fit the bill. 17X9 Centerline Eclipse's with 315/70/17's (35 inches tall) Attached Images __________________ 1972 Blazer -6 inch lift -35 inch BFG A/T's Turbo 350 NP-205 454 BB (for now) MORE TO COME !!!!!! Now going to 2WD!!!!! Sold. I got it back after 22 years and did not even know it !!! THE STORY HERE Project Low Down Dirty Rat

08-27-2007, 11:30 PM	#14
centsless sufficiently talented fool Join Date: Jun 2006 Location: Forest Hill, MD Posts: 2,231	Re: 17 inch rims Here's mine. 1995 Impala SS 17x9 wheels with P255/50ZR17 tires. They bolted right on with no adaptors, and don't rub at all. Attachment 294122 __________________ "it's impossible to be surrounded by idiots when you are part of the circle" 2003 Suburban 2002 Pontiac Montana 1981 Corvette 1966 Impala Convertible Click here to support the board Last edited by centsless; 10-04-2007 at 08:50 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.