control arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low-n-fat · 09-27-2007, 09:17 PM

what are some good tubalur control arms to use on a bagged 53 chevy truck.

pgf545 · 09-27-2007, 09:54 PM

Ok I have more questions than answers right now. What type of clip are you using? If you are using the camaro type clip then they are readily available through several camaro sources. I used a Heidt's Mustang 2 clip on my dads 52 and we got the tubular arms from them, but they also have several options. I don't know about the Dakota clips and what is available for them. Fill us in on what you have and I am sure you will get several responses. Also someone asked a similar question about a week ago and here is the link for that...I don't know if it will answer any of your questions though. Also you can look at my build thread for some pictures I posted when I install our kit. Good luck and post some pictures of your ride.

http://67-72chevytrucks.com/vboard/s...d.php?t=258830

Bernie

low-n-fat · 09-27-2007, 10:26 PM

I have the mustang II clip

low-n-fat · 10-03-2007, 10:28 AM

what control arm is everyone use with mustang II front clip

entourageguy · 10-03-2007, 10:52 AM

Check in the 47-59 parts for sale.
Hart_Rod has a set from his truck that he sold and never put on.

http://67-72chevytrucks.com/vboard/s...d.php?t=260891

Brian ..,.

09-27-2007, 09:17 PM	#1
low-n-fat Registered User Join Date: Jul 2007 Location: Mesquite Posts: 20	control arms what are some good tubalur control arms to use on a bagged 53 chevy truck.

09-27-2007, 09:54 PM	#2
pgf545 Registered User Join Date: May 2006 Location: Santa Fe,Texas Posts: 933	Re: control arms Ok I have more questions than answers right now. What type of clip are you using? If you are using the camaro type clip then they are readily available through several camaro sources. I used a Heidt's Mustang 2 clip on my dads 52 and we got the tubular arms from them, but they also have several options. I don't know about the Dakota clips and what is available for them. Fill us in on what you have and I am sure you will get several responses. Also someone asked a similar question about a week ago and here is the link for that...I don't know if it will answer any of your questions though. Also you can look at my build thread for some pictures I posted when I install our kit. Good luck and post some pictures of your ride. http://67-72chevytrucks.com/vboard/s...d.php?t=258830 Bernie __________________ 52 Chevy Truck (Dad's) http://67-72chevytrucks.com/vboard/s...d.php?t=206021

09-27-2007, 10:26 PM	#3
low-n-fat Registered User Join Date: Jul 2007 Location: Mesquite Posts: 20	Re: control arms I have the mustang II clip

10-03-2007, 10:28 AM	#4
low-n-fat Registered User Join Date: Jul 2007 Location: Mesquite Posts: 20	Re: control arms what control arm is everyone use with mustang II front clip

10-03-2007, 10:52 AM	#5
entourageguy Yellow truck club Join Date: Apr 2006 Location: Barrie Ontario Posts: 2,080	Re: control arms Check in the 47-59 parts for sale. Hart_Rod has a set from his truck that he sold and never put on. http://67-72chevytrucks.com/vboard/s...d.php?t=260891 Brian ..,. __________________ ................................................................ Brian ...... My hub garage address http://www.hubgarage.com/mygarage/59apache I gue$$ everything has it'$ price ALL GONE NOW *59 Chev Apache* *PRAISE THE LOWERED* 350 700r lokar shifter power MII front end, shockwaves tilt, 4 wheel discs 4-link and bags 10 bolt limited Last edited by entourageguy; 10-03-2007 at 10:52 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.