Center bolt SB valve cover question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jb4short · 10-12-2007, 06:56 AM

Has anyone found any real trick (nice looking) center bolt valve covers for the '87- SBC? I need two sets and I've been searching without a lot of luck. I don't need a notch out in either side.

earl87gta · 10-12-2007, 08:06 AM

I like the 86 to 91 l98 vet covers the best they remind we of the old school finned valve covers. there painted so if you want them polished your going to have to beed blast them down and polish them. I have a set Im polishing up now to use. if you get them from GM get ready for a heart atack there 240 a set. ebay around 100 a set . there Magneeziam so when you polish them up they look alittle diffrent then the aluminam but they come out great. If I can get my cammra to work with me today Ill try and get a pic for you.

cooters · 10-12-2007, 08:24 AM

gm performance has some nice centerbolt valve covers

jb4short · 10-12-2007, 09:09 AM

Quote:

Originally Posted by cooters

gm performance has some nice centerbolt valve covers

GM has three options in their catalog....I'd like something taller without "Chevrolet" in them

corn · 10-12-2007, 01:08 PM

I really like the covers N2TRUX put on his. Painted aluminum...

earl87gta · 10-12-2007, 04:39 PM

here are a set of the vet ones after I blasted them I hit one with a buffer for a minute so it would shine a little but it isnt done yet.

earl87gta · 10-12-2007, 05:01 PM

few more choices these are all from summit racing

earl87gta · 10-12-2007, 05:03 PM

and some more

earl87gta · 10-12-2007, 05:04 PM

and now for the big money pair at $400 a set.

scatesracing · 10-12-2007, 05:58 PM

Somthing like these ????? I have a friend that makes these he has differant ones but this is the only pic I can find.... He has some with just lines crossed flags , impala, ext. They do custom work to ..... last i knew they were made in the usa the castings that is.... machined and polished in KANSAS

scatesracing · 10-12-2007, 06:01 PM

a little of his work

earl87gta · 10-12-2007, 10:23 PM

thats cool do they do any thing other then valve covers and air cleaners? like bike parts?

scatesracing · 10-13-2007, 11:56 AM

Quote:

Originally Posted by earl87gta

thats cool do they do any thing other then valve covers and air cleaners? like bike parts?

I havnt seen any mill work done.....but a lot of polishing work for bikes.... he did a 400 turbo case a while back that was awsome

scatesracing · 10-13-2007, 12:10 PM

one more

scatesracing · 10-13-2007, 12:23 PM

fuel rail covers for a LT1....I know ......they are not valve covers

ChevLoRay · 10-13-2007, 02:38 PM

Seems like someone has center-bolt valve covers that mimic the early Olds valve covers....if a little deception isn't out of the question.

earl87gta · 10-13-2007, 12:00 PM

I do alot of polishing on the side. Im looking for some one who cam make we a new chain guard.

jkaylor68gmc · 10-13-2007, 05:14 PM

Burnham, buy them from Billet Specialties. Glen makes some really nice stuff.

10-12-2007, 06:56 AM	#1
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Center bolt SB valve cover question Has anyone found any real trick (nice looking) center bolt valve covers for the '87- SBC? I need two sets and I've been searching without a lot of luck. I don't need a notch out in either side.

10-12-2007, 08:06 AM	#2
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Center bolt SB valve cover question I like the 86 to 91 l98 vet covers the best they remind we of the old school finned valve covers. there painted so if you want them polished your going to have to beed blast them down and polish them. I have a set Im polishing up now to use. if you get them from GM get ready for a heart atack there 240 a set. ebay around 100 a set . there Magneeziam so when you polish them up they look alittle diffrent then the aluminam but they come out great. If I can get my cammra to work with me today Ill try and get a pic for you. __________________ Earl 68 2500 4x4 GMC Burb Last edited by earl87gta; 10-12-2007 at 08:07 AM.

10-12-2007, 08:24 AM	#3
cooters Senior Member Join Date: Oct 2006 Location: Edmonton Alberta Posts: 458	Re: Center bolt SB valve cover question gm performance has some nice centerbolt valve covers

10-12-2007, 01:08 PM	#5
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Center bolt SB valve cover question I really like the covers N2TRUX put on his. Painted aluminum...

10-12-2007, 04:39 PM	#6
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Center bolt SB valve cover question here are a set of the vet ones after I blasted them I hit one with a buffer for a minute so it would shine a little but it isnt done yet. Attached Images __________________ Earl 68 2500 4x4 GMC Burb

10-12-2007, 05:01 PM	#7
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Center bolt SB valve cover question few more choices these are all from summit racing Attached Images __________________ Earl 68 2500 4x4 GMC Burb Last edited by earl87gta; 10-12-2007 at 05:06 PM.

10-12-2007, 05:03 PM	#8
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Center bolt SB valve cover question and some more Attached Images __________________ Earl 68 2500 4x4 GMC Burb

10-12-2007, 05:04 PM	#9
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Center bolt SB valve cover question and now for the big money pair at $400 a set. Attached Images __________________ Earl 68 2500 4x4 GMC Burb

10-12-2007, 05:58 PM	#10
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Center bolt SB valve cover question Somthing like these ????? I have a friend that makes these he has differant ones but this is the only pic I can find.... He has some with just lines crossed flags , impala, ext. They do custom work to ..... last i knew they were made in the usa the castings that is.... machined and polished in KANSAS Attached Images

10-12-2007, 06:01 PM	#11
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Center bolt SB valve cover question a little of his work Attached Images

10-12-2007, 10:23 PM	#12
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Center bolt SB valve cover question thats cool do they do any thing other then valve covers and air cleaners? like bike parts? __________________ Earl 68 2500 4x4 GMC Burb

10-13-2007, 12:10 PM	#14
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Center bolt SB valve cover question one more Attached Images

10-13-2007, 12:23 PM	#15
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Center bolt SB valve cover question fuel rail covers for a LT1....I know ......they are not valve covers Attached Images

10-13-2007, 02:38 PM	#16
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: Center bolt SB valve cover question Seems like someone has center-bolt valve covers that mimic the early Olds valve covers....if a little deception isn't out of the question. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

10-13-2007, 12:00 PM	#17
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Center bolt SB valve cover question I do alot of polishing on the side. Im looking for some one who cam make we a new chain guard. __________________ Earl 68 2500 4x4 GMC Burb



Register or Log In To remove these advertisements.

10-13-2007, 05:14 PM	#18
jkaylor68gmc Senior Member Join Date: Dec 2005 Location: TN Posts: 2,448	Re: Center bolt SB valve cover question Burnham, buy them from Billet Specialties. Glen makes some really nice stuff. __________________ 1947 International KB-1 1957 Chevy Bel-Air riding low 1962 swb fleetside 2002 Chevrolet Silverado 7-inch lift on 35 Daily driver 2016 Chevy Tahoe Better halves ride Last edited by jkaylor68gmc; 10-13-2007 at 08:03 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.