![]() |
|
![]() |
#1 |
Registered User
![]() Join Date: Oct 2005
Location: Sacramento, CA
Posts: 1,970
|
Wheel Stud Size??
5 lug front disc rotors....what is the stock stud sizes?
Good source for slightly longer ones? ...and best way to remove and install em? Thx!
__________________
72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - ![]() My Build Thread |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2002
Location: woodstock, alabama, usa
Posts: 938
|
Re: Wheel Stud Size??
i just bought a few studs for my front rotors for the 71.
the stud is for a 1/2 lug nut. dont know the length. the best way to remove them is take the rotor off spin on a lug nut part way and tap it out the back with a hammer. the stud is splined with a shoulder on the back to keep it from pulling through. no idea where to get longer ones. you might take an old one out and take it to napa, or whatever is the bigger chain in your area. and compare some lug studs that they have for the correct spline, and thread to see if they have the length you want. hope that helps, Tony
__________________
i survived cancer and kidney stones, but my kids are killing me. |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Nov 2005
Location: northwestern wi
Posts: 2,111
|
Re: Wheel Stud Size??
for longer studs i would chech with a tire shop that sells alot of custom wheels or of course theres summit or jegs, and remember if you cant find them in their catalog it dosn't mean they don't have them
__________________
common sense isn't so common anymore |
![]() |
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|