70 GMC Parts Truck Idaho $250.00 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72armyswbtruck · 11-18-2007, 06:26 AM

I would prefer to sell this whole but I can part if necessary,
$250 and it is yours, it runs and you can drive it on a trailer, simple 250 V-6, Basic truck. Without a bed. Currently registered and titled in Idaho.

jorgensensc · 11-18-2007, 09:23 AM

WoW! What an awesome deal. 250.00 for a running truck that only needs a bed!!! Throw a flatbed on it and make a parts hauler. Wish I was closer! Great deal for someone.
Shawn

72armyswbtruck · 11-18-2007, 10:49 AM

Thanks, I just don't need it, bought it for the bed and that was it.

brianthelion02 · 11-18-2007, 11:39 AM

What a deal!!!!!!!LOCATION LOCATION LOCATION!!!!!!!!

HeavyD · 11-18-2007, 01:34 PM

Put me in line please..I am very interested. What shape is it in rust wise? Looks like it needs rockers..what about floor, above windshield, doors??

Longhorn Man · 11-18-2007, 03:19 PM

Wow... wish i was driving through Idaho next week instead of last month.

LUV2XCLR8 · 11-18-2007, 03:19 PM

Man, I could buy that to drive daily and sell my furd

brianthelion02 · 11-18-2007, 06:23 PM

I cant believe no one has bought this yet!!!!!!!!!

72armyswbtruck · 11-18-2007, 07:02 PM

Still available, looks in better shape then what it actually is, front cip is in good shape, but cab needs floor pans.
Andy I should have listed it earlier for you.

Longhorn Man · 11-18-2007, 07:04 PM

I had the money, the tow hitch reciever, the time, and I was GOING THROUGH IDAHO.

rambler · 11-19-2007, 08:00 AM

Great deal. My wife would divorce me if I brought home another parts truck (maybe not so bad a idea).

msgross · 08-27-2008, 08:53 AM

Does anyone know how to contact 72armyswbtruck? I need to reach him about some parts. if so please PM me ASAP. Thanks...

Luvlegs · 08-27-2008, 02:02 PM

I'd take the chrome valve cover and accessories on it....
and the whole truck if I wasn't a trillion miles away.... and the post not over 1 1/2 years old...

Huck · 08-27-2008, 03:58 PM

I would bring $400.00+ in scrap--interesting!!

**special-K** · 08-27-2008, 07:47 PM

Maybe back in`07 it wasn`t worth that much in scrap.Or,maybe he would rather see it used than scrapped and he got a bed for close to nothing.

**Gary 70 Jimmy** · 08-28-2008, 08:05 AM

Where is the v6 motor I see a inline 6

11-18-2007, 06:26 AM	#1
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	70 GMC Parts Truck Idaho $250.00 I would prefer to sell this whole but I can part if necessary, $250 and it is yours, it runs and you can drive it on a trailer, simple 250 V-6, Basic truck. Without a bed. Currently registered and titled in Idaho. Attached Images __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

11-18-2007, 09:23 AM	#2
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 70 GMC Parts Truck Idaho $250.00 WoW! What an awesome deal. 250.00 for a running truck that only needs a bed!!! Throw a flatbed on it and make a parts hauler. Wish I was closer! Great deal for someone. Shawn __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

11-18-2007, 10:49 AM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: 70 GMC Parts Truck Idaho $250.00 Thanks, I just don't need it, bought it for the bed and that was it. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

11-18-2007, 11:39 AM	#4
brianthelion02 Overdrive club Join Date: Sep 2007 Location: apache junction, arizona Posts: 819	Re: 70 GMC Parts Truck Idaho $250.00 What a deal!!!!!!!LOCATION LOCATION LOCATION!!!!!!!! __________________ 1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold!

11-18-2007, 01:34 PM	#5
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,180	Re: 70 GMC Parts Truck Idaho $250.00 Put me in line please..I am very interested. What shape is it in rust wise? Looks like it needs rockers..what about floor, above windshield, doors?? __________________ "You can take the man out of PA, but you can't take PA out of the man" Last edited by HeavyD; 11-18-2007 at 01:44 PM.

11-18-2007, 03:19 PM	#6
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 70 GMC Parts Truck Idaho $250.00 Wow... wish i was driving through Idaho next week instead of last month.

11-18-2007, 03:19 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: 70 GMC Parts Truck Idaho $250.00 Man, I could buy that to drive daily and sell my furd __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-18-2007, 06:23 PM	#8
brianthelion02 Overdrive club Join Date: Sep 2007 Location: apache junction, arizona Posts: 819	Re: 70 GMC Parts Truck Idaho $250.00 I cant believe no one has bought this yet!!!!!!!!! __________________ 1971 c-10 1951 3100 chevy 1970 chevy c-30 Sold!

11-18-2007, 07:02 PM	#9
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,033	Re: 70 GMC Parts Truck Idaho $250.00 Still available, looks in better shape then what it actually is, front cip is in good shape, but cab needs floor pans. Andy I should have listed it earlier for you. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

11-18-2007, 07:04 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 70 GMC Parts Truck Idaho $250.00 I had the money, the tow hitch reciever, the time, and I was GOING THROUGH IDAHO.

11-19-2007, 08:00 AM	#11
rambler MOVE OVER Join Date: Jun 2002 Location: Warrensburg, MO Posts: 5,470	Re: 70 GMC Parts Truck Idaho $250.00 Great deal. My wife would divorce me if I brought home another parts truck (maybe not so bad a idea). __________________ No matter where you are..... There you are... Buckaroo Banzi

08-27-2008, 08:53 AM	#12
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: 70 GMC Parts Truck Idaho $250.00 Does anyone know how to contact 72armyswbtruck? I need to reach him about some parts. if so please PM me ASAP. Thanks... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

08-27-2008, 02:02 PM	#13
Luvlegs Registered User Join Date: Sep 2005 Location: Smith Mountain Lake Virginia Posts: 1,537	Re: 70 GMC Parts Truck Idaho $250.00 I'd take the chrome valve cover and accessories on it.... and the whole truck if I wasn't a trillion miles away.... and the post not over 1 1/2 years old... __________________ "A cat will almost always blink when hit between the eyes with a ball peen hammer" (you don't always have to state the obvious) Wear your PPE! You can eat with false teeth but you can't see with a false eye. 1959 Studebaker Silverhawk 350/400 1972 C10 L6 3OTT 2005 F350 - Built - whew! Last edited by Luvlegs; 08-27-2008 at 11:39 PM.

08-27-2008, 03:58 PM	#14
Huck Senior Member Join Date: Jun 2001 Location: Shelbyville, KY Posts: 3,261	Re: 70 GMC Parts Truck Idaho $250.00 I would bring $400.00+ in scrap--interesting!!

08-27-2008, 07:47 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 70 GMC Parts Truck Idaho $250.00 Maybe back in`07 it wasn`t worth that much in scrap.Or,maybe he would rather see it used than scrapped and he got a bed for close to nothing. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

08-28-2008, 08:05 AM	#16
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	Re: 70 GMC Parts Truck Idaho $250.00 Where is the v6 motor I see a inline 6

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.