Wanted new or gently used flowmasters prefer 3 inch in / out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 11-22-2007, 03:03 PM

also want big block intake for oval port prefer team g or victor junior
while I am dreaming looking for a alum long water pump and pulley set
a lakewood blow proof bell housing for chevy
set of 35 inch or bigger swamper boggers with or without wheels thanks Mike

f.monroe · 01-01-2008, 07:11 PM

Still looking for 3 inch flows. I have a pair . One was installed and one has never been installed . They are 3 inch 3 chamber offset/center i think . If so let me know . $100 plus shipping . Frank

**jerry moss** · 01-02-2008, 07:30 AM

FYI-flowmasters are all the same on the inside, the only difference is the inlet/outlet diameters. i work in a muffler shop and we only carry 2 1/4 in/out and swell them to fit whatever pipe size we are working with--they will swell to 3 inch with no problem.
by the way, 100 bucks for a pair is a great deal.

f.monroe · 01-02-2008, 02:40 PM

Thanks for the info . I actually want a set of the same mufflers in 2.5inch instaed of three inch . I need to talk to the exhaust guy and see if it is a problem for him to run 2.5inch pipe with these 3inch mufflers . If so , I might just use them . Frank

11-22-2007, 03:03 PM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Wanted new or gently used flowmasters prefer 3 inch in / out also want big block intake for oval port prefer team g or victor junior while I am dreaming looking for a alum long water pump and pulley set a lakewood blow proof bell housing for chevy set of 35 inch or bigger swamper boggers with or without wheels thanks Mike __________________ hav'n fun be'n me

01-01-2008, 07:11 PM	#2
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Wanted new or gently used flowmasters prefer 3 inch in / out Still looking for 3 inch flows. I have a pair . One was installed and one has never been installed . They are 3 inch 3 chamber offset/center i think . If so let me know . $100 plus shipping . Frank __________________ Born and proudly residing in a Red State !

01-02-2008, 07:30 AM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: Wanted new or gently used flowmasters prefer 3 inch in / out FYI-flowmasters are all the same on the inside, the only difference is the inlet/outlet diameters. i work in a muffler shop and we only carry 2 1/4 in/out and swell them to fit whatever pipe size we are working with--they will swell to 3 inch with no problem. by the way, 100 bucks for a pair is a great deal. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-02-2008, 02:40 PM	#4
f.monroe Senior Member Join Date: May 2004 Location: Caldwell,Tx. Posts: 3,648	Re: Wanted new or gently used flowmasters prefer 3 inch in / out Thanks for the info . I actually want a set of the same mufflers in 2.5inch instaed of three inch . I need to talk to the exhaust guy and see if it is a problem for him to run 2.5inch pipe with these 3inch mufflers . If so , I might just use them . Frank __________________ Born and proudly residing in a Red State !

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.