Tru- Ram manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jeffspower · 11-24-2007, 11:32 AM

Anyone tried them on our trucks? Curious if they would clear everything on a 4x4.

http://www.speedwaymotors.com/p/5425...Manifolds.html

EAST SIDE LOW LIFE · 11-24-2007, 10:10 PM

I just had to stop dead in my tracks and do a post on this. These are drop dead gorgious!!! I can see these on an old hot rod like a 32 ford or a 50's ride. Never seen them on our trucks .... never seen them before to tell you the truth.

esll.

**Boog** · 11-24-2007, 10:14 PM

You're right. They would look great on a showcar like a roadster. I wonder how long the chrome will last before it starts to turn colors?

Spray-Bomb · 11-24-2007, 10:22 PM

Polished stainless, not chrome

Those are nice !!!

bad6772 · 11-24-2007, 10:24 PM

im gettin me a set.............

corn · 11-24-2007, 10:29 PM

Those are nice! I bet they turn gold after the first drive though...

**special-K** · 11-24-2007, 10:36 PM

They`re not just available polished stainless,right?I saw another picture and I thought they were steel or cast...no shine.

GMCBubba · 11-24-2007, 10:45 PM

they have polished and natural stainless and a cast iron set

Andy4639 · 11-25-2007, 05:50 AM

Here is what the site say's about them and cost.

9300301 Unpolished Stainless Tru-Ram® Exhaust Manifolds
Small block Chevy

PR $349.99

9300302 Polished Stainless Tru-Ram® Exhaust Manifolds
Small block Chevy

PR $449.99
Suggestions

91013710 Copper Exhaust Gasket
S/B Chevy, Square Port
PR $24.99

91013755 Header Reducer, 2-1/2" In and 2" Out, Stainless Steel
PR $29.99

9300300-3 Replacement Ram Exhaust Manifold Gasket Set
ST $10.99

see ten · 11-25-2007, 06:40 AM

Nice!

**special-K** · 11-25-2007, 06:42 AM

Do they offer a mandrel-bent head pipe to complete the package.I love these,too.But,that`s what I`d want to sway me from headers.

**N2TRUX** · 11-25-2007, 09:45 AM

Quote:

Originally Posted by special-K

Do they offer a mandrel-bent head pipe to complete the package.I.....

Probably not, but you can have one built...

Cyclone44 · 11-25-2007, 04:16 PM

Those are nice

BCOWANWHEELS · 11-25-2007, 06:31 PM

speedway motors sells em.

**special-K** · 11-25-2007, 09:54 PM

That`s real nice,Ken.I have a local guy to do a mandrel bent exhaust for mine when I`m ready.I may go with these.Decisions,decisions,decisions...

Mondo · 11-25-2007, 10:14 PM

I asked the same question about these a few weeks ago. Not sure they'll fit though... I think our manifolds need to angle back and can't come straight down in the middle like these

.

If someone has these installed, please speak up

**special-K** · 11-25-2007, 10:21 PM

Doh!!Good point.One I keep overlooking,them get disappointed.

**N2TRUX** · 11-25-2007, 10:42 PM

I'm not sure about these manifolds specifically, but the straight cast ramhorns will fit. I have the 3" Corvette ramhorns on my 77 Cheyenne.

jeffspower · 11-27-2007, 01:07 PM

Surely somebody has tried these! If not, I'll be trying them next spring when I have the coin. I want to get rid of the crappy headers on the '68 K10, and thought these would look sweet & flow decent. Speedway is 1/2 hour away from where the truck is kept at my dads, so it would be a short trip to return them if they don't fit.

N2TRUX, thanks for the info. I've always wondered if ram horns work on '73- up.

Mondo · 11-27-2007, 10:08 PM

On the thread below I showed these manifolds along with Sanderson's cast iron header (keep things quieter)...
Sanderson doesn't recommend this type header for small block. Hopefully someone will take the chance and let us know

http://67-72chevytrucks.com/vboard/s...d.php?t=266139

70 Suburban · 11-27-2007, 10:26 PM

i think that if you call polydine they can coat ours and make them look like brushed ss.

11-24-2007, 11:32 AM	#1
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Tru- Ram manifolds Anyone tried them on our trucks? Curious if they would clear everything on a 4x4. http://www.speedwaymotors.com/p/5425...Manifolds.html Attached Images __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

11-24-2007, 10:10 PM	#2
EAST SIDE LOW LIFE Senior Member Join Date: Mar 2007 Location: VANCOUVER ISLAND, B.C., Canada Posts: 1,602	Re: Tru- Ram manifolds I just had to stop dead in my tracks and do a post on this. These are drop dead gorgious!!! I can see these on an old hot rod like a 32 ford or a 50's ride. Never seen them on our trucks .... never seen them before to tell you the truth. esll. __________________ Tomorrow is for doing today's stuff. ************************************* This truck has just the right amount of energy for me! Author: Warren Lake .... (member)

11-24-2007, 10:14 PM	#3
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,459	Re: Tru- Ram manifolds You're right. They would look great on a showcar like a roadster. I wonder how long the chrome will last before it starts to turn colors? __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-24-2007, 10:22 PM	#4
Spray-Bomb Texas Big Wig Join Date: Jan 2007 Location: Mineola, Texas Posts: 5,620	Re: Tru- Ram manifolds Polished stainless, not chrome Those are nice !!! __________________ Just not low enough... ----------------------------- Sinister Killer

11-24-2007, 10:24 PM	#5
bad6772 Official Site Guitar Shredder Join Date: May 2006 Location: Oz Posts: 3,955	Re: Tru- Ram manifolds im gettin me a set.............

11-24-2007, 10:29 PM	#6
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Tru- Ram manifolds Those are nice! I bet they turn gold after the first drive though...

11-24-2007, 10:36 PM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Tru- Ram manifolds They`re not just available polished stainless,right?I saw another picture and I thought they were steel or cast...no shine. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-24-2007, 10:45 PM	#8
GMCBubba Registered User Join Date: Oct 2006 Location: Simpsonville, SC Posts: 255	Re: Tru- Ram manifolds they have polished and natural stainless and a cast iron set __________________ 1969 GMC 3/4 ton, 307, 4-speed NP435GL, DANA 60, 4.10, HD rear leafs, manual everything, leaking oil and water. Now rocking 383, NV4500, power steering, power brakes. Finally undergoing restoration.

11-25-2007, 05:50 AM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Tru- Ram manifolds Here is what the site say's about them and cost. 9300301 Unpolished Stainless Tru-Ram® Exhaust Manifolds Small block Chevy PR $349.99 9300302 Polished Stainless Tru-Ram® Exhaust Manifolds Small block Chevy PR $449.99 Suggestions 91013710 Copper Exhaust Gasket S/B Chevy, Square Port PR $24.99 91013755 Header Reducer, 2-1/2" In and 2" Out, Stainless Steel PR $29.99 9300300-3 Replacement Ram Exhaust Manifold Gasket Set ST $10.99 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

11-25-2007, 06:40 AM	#10
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Tru- Ram manifolds Nice!

11-25-2007, 06:42 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Tru- Ram manifolds Do they offer a mandrel-bent head pipe to complete the package.I love these,too.But,that`s what I`d want to sway me from headers. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-25-2007, 04:16 PM	#13
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Tru- Ram manifolds Those are nice

11-25-2007, 06:31 PM	#14
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: Tru- Ram manifolds speedway motors sells em. __________________ I BELIEVE IN JOHN 3:16

11-25-2007, 09:54 PM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Tru- Ram manifolds That`s real nice,Ken.I have a local guy to do a mandrel bent exhaust for mine when I`m ready.I may go with these.Decisions,decisions,decisions... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-25-2007, 10:14 PM	#16
Mondo Registered User Join Date: Aug 2007 Location: Bakersfield, Ca Posts: 538	Re: Tru- Ram manifolds I asked the same question about these a few weeks ago. Not sure they'll fit though... I think our manifolds need to angle back and can't come straight down in the middle like these. If someone has these installed, please speak up



Register or Log In To remove these advertisements.

11-25-2007, 10:21 PM	#17
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Tru- Ram manifolds Doh!!Good point.One I keep overlooking,them get disappointed. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-25-2007, 10:42 PM	#18
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Tru- Ram manifolds I'm not sure about these manifolds specifically, but the straight cast ramhorns will fit. I have the 3" Corvette ramhorns on my 77 Cheyenne. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-27-2007, 01:07 PM	#19
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: Tru- Ram manifolds Surely somebody has tried these! If not, I'll be trying them next spring when I have the coin. I want to get rid of the crappy headers on the '68 K10, and thought these would look sweet & flow decent. Speedway is 1/2 hour away from where the truck is kept at my dads, so it would be a short trip to return them if they don't fit. N2TRUX, thanks for the info. I've always wondered if ram horns work on '73- up. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

11-27-2007, 10:08 PM	#20
Mondo Registered User Join Date: Aug 2007 Location: Bakersfield, Ca Posts: 538	cast iron headers On the thread below I showed these manifolds along with Sanderson's cast iron header (keep things quieter)... Sanderson doesn't recommend this type header for small block. Hopefully someone will take the chance and let us know http://67-72chevytrucks.com/vboard/s...d.php?t=266139 Last edited by Mondo; 11-27-2007 at 10:12 PM.

11-27-2007, 10:26 PM	#21
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: Tru- Ram manifolds i think that if you call polydine they can coat ours and make them look like brushed ss.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.