67 Only options/parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*ksjh1316* · 12-12-2007, 10:32 PM

Ok I am getting ready to build a 67 Chevy SWB from pretty much the ground up as the inside and engine bay had a small fire in the past and need to know which parts were unique to 67 only or were short run. I have a 71 GMC LWB which will be donating a lot of parts and want to see if anything is transferable and still be correct. There may be a list already out there but was unable to pull it up on the search function.

**too much stuff** · 12-12-2007, 10:45 PM

Just for starters: fenders/boxside, rear window is small, dash knobs, door handles, the whole dash, (ign switch, ash tray,) parking brake setup is 67-68, i think window cranks are different also. I am sure more will answer...

**jerry moss** · 12-13-2007, 08:07 AM

wing window handles

Americanrider · 12-13-2007, 10:35 AM

67 Fusebox mounts differently than other years.

toms68cst · 12-13-2007, 11:42 AM

Power Streering (Corvette Style Assist)setup is unique to 67's and early 68's.

Yullose · 12-13-2007, 12:26 PM

I'm curious also... as my 67 has a 69 front clip on it. (so I was told)

I'd like to put the correct parts back on it... and don't know what is different as far as fenders, hood, grille and rad support goes.

I don't know if the previous owner just put a 69 grille in it, or if he replaced fenders & hood too.

67ChevyRedneck · 12-13-2007, 12:43 PM

Quote:

Originally Posted by Yullose

I'm curious also... as my 67 has a 69 front clip on it. (so I was told)

I'd like to put the correct parts back on it... and don't know what is different as far as fenders, hood, grille and rad support goes.

I don't know if the previous owner just put a 69 grille in it, or if he replaced fenders & hood too.

You can't put a 69 chevy grill on 67/68 fenders without cutting the grill up. BUT you can put a newer (69-72) GMC grill on 67/68 Chevy/GMC fenders. GMC used the same fenders from 67-72 (67's with no turnsignal cutouts.)

*IF* your truck has a 69 CHEVY front end on it, you will basically need a complete 67/68 front clip (grill, hood, fenders, core support, hood latch)

Yullose · 12-13-2007, 01:00 PM

Quote:

Originally Posted by 67ChevyRedneck

You can't put a 69 chevy grill on 67/68 fenders without cutting the grill up. BUT you can put a newer (69-72) GMC grill on 67/68 Chevy/GMC fenders. GMC used the same fenders from 67-72 (67's with no turnsignal cutouts.)

*IF* your truck has a 69 CHEVY front end on it, you will basically need a complete 67/68 front clip (grill, hood, fenders, core support, hood latch)

Can you tell the difference via pictures ? I have a pic showing the nose...
(sorry for hijacking the thread)

67ChevyRedneck · 12-13-2007, 01:16 PM

Sure can, that is a complete 69-72 front clip with a 69 grill. 70 grill is the same, except the plastic insert is different (horizontal plastic slats only). A 71/72 chevy grill will work on your truck too.

If you want a 67/68 grill you will need a complete 67/68 clip.

*Nice truck, looks like a clean starter truck.

Your truck definitely looks like a 67 with a 69 clip... small window cab and no turn signals in the bed. You can check the VIN to be sure.

70c10 · 12-13-2007, 12:45 PM

From what I hear, some 67's had flip forward bench seats. I have one in my truck but it was in there when I bought it.

67ChevyRedneck · 12-13-2007, 12:46 PM

Quote:

Originally Posted by 70c10

From what I hear, some 67's had flip forward bench seats. I have one in my truck but it was in there when I bought it.

My truck had that. Didn't know that! Damn, shouldn't have tossed it

12-12-2007, 10:32 PM	#1
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	67 Only options/parts Ok I am getting ready to build a 67 Chevy SWB from pretty much the ground up as the inside and engine bay had a small fire in the past and need to know which parts were unique to 67 only or were short run. I have a 71 GMC LWB which will be donating a lot of parts and want to see if anything is transferable and still be correct. There may be a list already out there but was unable to pull it up on the search function.

12-12-2007, 10:45 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,768	Re: 67 Only options/parts Just for starters: fenders/boxside, rear window is small, dash knobs, door handles, the whole dash, (ign switch, ash tray,) parking brake setup is 67-68, i think window cranks are different also. I am sure more will answer... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-13-2007, 08:07 AM	#3
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: 67 Only options/parts wing window handles __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-13-2007, 10:35 AM	#4
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: 67 Only options/parts 67 Fusebox mounts differently than other years.

12-13-2007, 11:42 AM	#5
toms68cst Registered User Join Date: Jun 2000 Location: Bismarck, ND Posts: 4,293	Re: 67 Only options/parts Power Streering (Corvette Style Assist)setup is unique to 67's and early 68's. __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

12-13-2007, 12:26 PM	#6
Yullose Registered User Join Date: Dec 2007 Location: Mooresville, NC Posts: 76	Re: 67 Only options/parts I'm curious also... as my 67 has a 69 front clip on it. (so I was told) I'd like to put the correct parts back on it... and don't know what is different as far as fenders, hood, grille and rad support goes. I don't know if the previous owner just put a 69 grille in it, or if he replaced fenders & hood too.

12-13-2007, 01:16 PM	#9
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: 67 Only options/parts Sure can, that is a complete 69-72 front clip with a 69 grill. 70 grill is the same, except the plastic insert is different (horizontal plastic slats only). A 71/72 chevy grill will work on your truck too. If you want a 67/68 grill you will need a complete 67/68 clip. Nice truck, looks like a clean starter truck. Your truck definitely looks like a 67 with a 69 clip... small window cab and no turn signals in the bed. You can check the VIN to be sure. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 12-13-2007 at 01:19 PM.*

12-13-2007, 12:45 PM	#10
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: 67 Only options/parts From what I hear, some 67's had flip forward bench seats. I have one in my truck but it was in there when I bought it. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.