Where do the Manufactures/Vendors get this Stuff?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Frizzle Fry · 01-25-2008, 07:54 AM

This is not meant to be a WTB, I need help figuring out where to buy something:

I've been working on a mod for one of my trucks and I'd like to find a source from which to purchase glass run stripping (the weatherstrip that goes in the upper/rear of the door-window frames) by the roll.

When vendors sell it for a specific year/model truck it comes cut to length with relief cuts for the radiuses. I'd like to find the same stuff, just not pre-cut.

For reference I'm talking about the material used to make item #9 here.

Anyone have any suggestions?

Here's a pic:

cstanley · 01-25-2008, 08:21 AM

making roll-down windows in the rear of the 'ho?

bump for ya...

cdowns · 01-25-2008, 08:34 AM

try www.restorationspecialties.com

**john** · 01-25-2008, 08:40 AM

Heres some misc, weather stripping.

http://www.jcwhitney.com/autoparts/P...=group_listing

Frizzle Fry · 01-25-2008, 08:52 AM

Quote:

Originally Posted by cstanley

making roll-down windows in the rear of the 'ho?

bump for ya...

Somethin like that

Quote:

Originally Posted by cdowns

try www.restorationspecialties.com

Thanks!

Quote:

Originally Posted by john

Heres some misc, weather stripping.

http://www.jcwhitney.com/autoparts/P...=group_listing

There it is! Perefect, thanks!

68GenIII · 01-25-2008, 10:44 AM

Quote:

Originally Posted by john

Heres some misc, weather stripping.

http://www.jcwhitney.com/autoparts/P...=group_listing

Beat me to it, thats who I was going to suggest.

PanelDeland · 01-25-2008, 10:47 AM

If you have need of weatherstripping for just about anything the go to company for that is called Steele.They have weatherstrip for just about anything ever built.I'm talking Desoto's,Nash,and even way back into the 20's.

Andy4639 · 01-25-2008, 10:52 AM

Call them. I know most of them. I went to school with them.

Steel Products of DENVER of the East in NC. Hwy 150 just out of Charlotte NC
They have it all.

http://166.82.96.3/content.php?section=28&cat=4

Frizzle Fry · 01-26-2008, 12:46 AM

Thanks guys. I'll check them out.

timcos · 01-26-2008, 01:14 AM

www.soffseal.com

Musclerodz · 01-26-2008, 02:30 AM

I carry Metro and can get it by the foot.

Mike

Frizzle Fry · 01-26-2008, 04:01 AM

Quote:

Originally Posted by timcos

www.soffseal.com

You know, I've actually ordered some stuff from them, but they seem to be pretty spendy.

Quote:

Originally Posted by Musclerodz

I carry Metro and can get it by the foot.

Mike

Ok, forgive me... What's Metro?

fatboys69 · 01-26-2008, 04:09 AM

I Bought some from my local glass supply house, they have it in 8 ft sticks.
I was putting windows in a 37 Plymouth Pickup Truck and needed guides for the power windows to to work.

Musclerodz · 01-27-2008, 12:53 AM

Quote:

Originally Posted by Frizzle Fry

You know, I've actually ordered some stuff from them, but they seem to be pretty spendy.

Ok, forgive me... What's Metro?

Another weatherstrip company that has been around a mere 88 years.

Mike

71tahoe · 01-27-2008, 10:38 AM

CR Laurence may have something.

http://www.crlaurence.com/adv/cataloglibrary/index.html

CRL43 catalog page A323

01-25-2008, 07:54 AM	#1
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Where do the Manufactures/Vendors get this Stuff?? This is not meant to be a WTB, I need help figuring out where to buy something: I've been working on a mod for one of my trucks and I'd like to find a source from which to purchase glass run stripping (the weatherstrip that goes in the upper/rear of the door-window frames) by the roll. When vendors sell it for a specific year/model truck it comes cut to length with relief cuts for the radiuses. I'd like to find the same stuff, just not pre-cut. For reference I'm talking about the material used to make item #9 here. Anyone have any suggestions? Here's a pic: Last edited by Frizzle Fry; 01-25-2008 at 08:07 AM.

01-25-2008, 08:21 AM	#2
cstanley Senior Member Join Date: Oct 2005 Location: Austin, TX Posts: 1,229	Re: Where do the Manufactures/Vendors get this Stuff?? making roll-down windows in the rear of the 'ho? bump for ya... __________________ "Anybody who would paint his truck like this, would go to a minister's funeral dressed in feathers!" - Big Enis Burdett '72 Blazer Restoration Blog: http://sportchicken.blogspot.com/

01-25-2008, 08:34 AM	#3
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Where do the Manufactures/Vendors get this Stuff?? try www.restorationspecialties.com __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

01-25-2008, 08:40 AM	#4
john member #16 Join Date: Dec 1999 Location: Yuba City Ca. Posts: 3,618	Re: Where do the Manufactures/Vendors get this Stuff?? Heres some misc, weather stripping. http://www.jcwhitney.com/autoparts/P...=group_listing __________________ john http://67-72chevytrucks.com/vboard/showgroups.php board vendors http://www.flickr.com/photos/1745471...7602865984234/

01-25-2008, 10:47 AM	#7
PanelDeland I am a Referee of life. Join Date: Jun 2000 Location: Greensboro N.C. Posts: 13,992	Re: Where do the Manufactures/Vendors get this Stuff?? If you have need of weatherstripping for just about anything the go to company for that is called Steele.They have weatherstrip for just about anything ever built.I'm talking Desoto's,Nash,and even way back into the 20's. __________________ The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil"

01-25-2008, 10:52 AM	#8
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Where do the Manufactures/Vendors get this Stuff?? Call them. I know most of them. I went to school with them. Steel Products of DENVER of the East in NC. Hwy 150 just out of Charlotte NC They have it all. http://166.82.96.3/content.php?section=28&cat=4 __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-26-2008, 12:46 AM	#9
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: Where do the Manufactures/Vendors get this Stuff?? Thanks guys. I'll check them out.

01-26-2008, 01:14 AM	#10
timcos Chief Honcho In Charge Join Date: Aug 2006 Location: Bentonville AR Posts: 970	Re: Where do the Manufactures/Vendors get this Stuff?? www.soffseal.com __________________ 1992 1500 4x4 Shortbed 1984 Ford F250 Supercab Longbed 6.9L Diesel 1972 K10 Cheyenne Super Fleetside Short Bed - 350 - A/C 1971 VW SuperBeetle 1960 Wife 1984 Son 1986 Son 1989 Son Previous Trucks 1967 C10 SWB (1980-1981) 1971 C10 LWB (1998-2004)

01-26-2008, 02:30 AM	#11
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Re: Where do the Manufactures/Vendors get this Stuff?? I carry Metro and can get it by the foot. Mike __________________ Mike Redpath

01-26-2008, 04:09 AM	#13
fatboys69 Registered User Join Date: Aug 2006 Location: Dayton, Tennessee Posts: 447	Re: Where do the Manufactures/Vendors get this Stuff?? I Bought some from my local glass supply house, they have it in 8 ft sticks. I was putting windows in a 37 Plymouth Pickup Truck and needed guides for the power windows to to work.

01-27-2008, 10:38 AM	#15
71tahoe Registered User Join Date: May 2006 Location: Jonesboro, AR Posts: 916	Re: Where do the Manufactures/Vendors get this Stuff?? CR Laurence may have something. http://www.crlaurence.com/adv/cataloglibrary/index.html CRL43 catalog page A323

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.